New Arrivals

Your Fortress bolt-on cap has been holding it together - now it's time to return the favor. This service kit gives your Fortress cap fresh gaskets, oil fill plugs, and hardware it needs to stay leak-free and pressure tight.

• Accessories and Parts
• Trailer Bearings Races Seals Caps
• Service Kit
• Dexter

This replacement inner member slide fits into the existing outer member housing of your Dexter or Tie Down surge brake actuator. Fits actuator models LP80, LP85, and LP8500.

• Accessories and Parts
• Brake Actuator
• Disc Brakes
• Hydraulic Drum Brakes
• Inner Member
• Dexter

Replace worn or leaking copper washers on your Dexter disc brake caliper. These 7/16" crush washers provide a tight, reliable seal between the banjo fittings and calipers to help prevent brake fluid leaks in your hydraulic braking system.

• Accessories and Parts
• Trailer Brakes
• Disc Brakes
• Caliper Parts
• Hardware
• Washers
• Dexter

Replace a lost or damaged bracket or install one in a second vehicle to easily transfer your Curt NEXT brake controller. The low-profile design installs above or below the dash and includes multiple mounting options for a secure, unobtrusive fit.

• Accessories and Parts
• Trailer Brake Controller
• Mounting Hardware
• Brackets
• CURT

For heavy-duty applications that require cable, this steel winch cable has a break strength of 5,600 lbs and a working load limit of 1,865 lbs.

• Accessories and Parts
• Electric Winch
• Trailer Winch
• Cables and Straps
• 7/32 Inch Diameter
• 5600 lbs
• Wire Rope
• CURT

For heavy-duty applications, this strap has a break strength of 4,800 lbs and a working load limit of 1,600 lbs.

• Accessories and Parts
• Trailer Winch
• Cables and Straps
• 22-3/8 Inch Wide
• 1600 lbs
• Straps
• CURT

Install your Curt electric trailer brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in port beneath your driver's seat.

• Accessories and Parts
• Trailer Brake Controller
• Wiring Adapter
• Plugs into Brake Controller
• Vehicle Specific
• CURT

Replace a damaged or worn spring bar on your Curt TruTrack 2P system with this forged steel bar. Designed for 5,000-lb to 8,000-lb setups only (17599). Restores sway control and load leveling for safer, more stable towing.

• Accessories and Parts
• Weight Distribution Hitch
• Spring Bars
• Sqaure Bar
• CURT

Install your Curt electric trailer brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your controller and then plug the other end into the built-in port beneath your vehicle's dash.

• Accessories and Parts
• Trailer Brake Controller
• Wiring Adapter
• Plugs into Brake Controller
• Vehicle Specific
• CURT

For heavy-duty applications that require cable, this steel winch cable has a break strength of 4,200 lbs and a working load limit of 1,400 lbs.

• Accessories and Parts
• Electric Winch
• Trailer Winch
• Cables and Straps
• 3/16 Inch Diameter
• 4200 lbs
• Wire Rope
• CURT

Replaces the spring bar for your Curt TruTrack 4P trailer-mounted weight distribution system (17520).

• Accessories and Parts
• Weight Distribution Hitch
• Spring Bars
• Square Bar
• CURT

Replace 2 worn or damaged backing plates on your single-axle trailer fender. Backing easily blocks water and road debris from hitting the side of your trailer.

• Accessories and Parts
• Trailer Fenders
• Fender Back
• CE Smith

Coupler repair kit contains all needed replacement parts for your CE Smith straight-tongue coupler with a 3,500-lb or 5,000-lb capacity, except for the coupler housing.

• Accessories and Parts
• Straight Tongue Trailer Coupler
• Coupler Repair
• CE Smith

If you're tired of steel brackets rusting out on your boat trailer, try this aluminum bracket. It's lightweight, durable, and won't rust, so your tail lights stay mounted season after season no matter where you launch.

• Accessories and Parts
• Trailer Lights
• Mounting Hardware
• Brackets
• CE Smith

This towing safety flag is ideal for your kayak, SUP, or anything else you want to tow and draw attention to. Made of Oxford fabric and nylon webbing, so it holds up for the long haul.

• Accessories and Parts
• Trailers
• Watersport Carriers
• Sports Trailer Parts
• Watersport Trailer Parts
• Safety Flag
• CE Smith

If you're tired of steel brackets rusting out on your boat trailer, try this aluminum bracket. It's lightweight, durable, and won't rust, so your tail lights stay mounted season after season no matter where you launch.

• Accessories and Parts
• Trailer Lights
• Mounting Hardware
• Brackets
• CE Smith

If you're tired of steel brackets rusting out on your boat trailer, try this aluminum bracket. It's lightweight, durable, and won't rust, so your tail lights stay mounted season after season no matter where you launch.

• Accessories and Parts
• Trailer Lights
• Mounting Hardware
• Brackets
• CE Smith

Bring your guide-on back to life with this genuine replacement post for your 22" pontoon post guide-on setup. Made from durable, white PVC, it drops right onto your existing brackets to get you back on the water faster.

• Accessories and Parts
• Boat Trailer Parts
• Guide-On Parts
• Posts
• White
• CE Smith

Rustproof, durable aluminum bracket lets you mount a tail light to your trailer frame.

• Accessories and Parts
• Trailer Lights
• Mounting Hardware
• Brackets
• CE Smith

Replace 1 worn or damaged backing plate on your single-axle trailer fender. Backing easily blocks water and road debris from hitting the side of your trailer.

• Accessories and Parts
• Trailer Fenders
• Fender Back
• CE Smith

The breeze is perfect, but now a rip threatens your bug-free night. With these patches in your pack, you fix the hole in seconds and relax, knowing nothing will crawl in as you drift off to sleep.

• Accessories and Parts
• Tents
• Tent Repair
• Coghlans

Install your Curt electric trailer brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in port beneath your vehicle's dash.

• Accessories and Parts
• Trailer Brake Controller
• Wiring Adapter
• Plugs into Brake Controller
• Vehicle Specific
• CURT

Replace the lost or damaged center pin for your Curt PowerRide fifth-wheel trailer hitch. Pin secures the 5th wheel head to the hitch body.

• Accessories and Parts
• 5th Wheel Hitch
• Pins and Clips
• CURT

Replaces the short bed bracket for your Curt OEM puck system gooseneck ball kit (C60668 or C60663). Compatible with 2023-2025 GMC Sierra and Chevrolet Silverado trucks with 6.5' short beds.

• Accessories and Parts
• Trailer Hitch Ball
• Mounting Hardware
• Brackets
• CURT