Replace the black rubber sleeves on your Blue Ox Alpha 2 (BX7380), Avail (BX7420), Ascent (BX4375, BX4370), or Apollo (BX7475) tow bar to keep dirt and debris out of the tow bar's telescoping arms. Includes 2 sleeves, 2 nuts, and 4 zip-ties.
If you need to disconnect the battery to flat tow your vehicle, you're going to want this kit. It disconnects your battery with the turn of a knob - much safer and faster than doing it yourself - while keeping your towing accessories charged.
Shank measures 12" long from the center of the hitch pin hole to the center of the adjustment holes. 7 Bolt holes let you adjust the height of your Blue Ox SwayPro weight distribution system. Fits 2" receivers. 850 lb tongue weight.
Shank measures 12" long from the center of the hitch pin hole to the center of the adjustment holes. 7 Bolt holes let you adjust the height of your Blue Ox TrackPro weight distribution system. Fits 2" receivers. 850 lb tongue weight.
Mount your Blue Ox SwayPro weight distribution system with this heavy-duty shank. Designed for 2" hitches, this steel shank installs in either the rise or drop position and handles up to 15,000 lbs of trailer weight.
Shank measures 12" long from center of hitch pin hole to the center of the adjustment holes. 7 Bolt holes let you adjust the height of your Blue Ox TrackPro weight distribution system. Fits 2" receivers.
Shank measures 9" long from center of hitch pin hole to the center of the adjustment holes. 9 Bolt holes let you adjust the height of your Blue Ox TrackPro weight distribution system. Fits 3" receivers.
Attach these keepers to the S-hooks on your 7,500 lb safety cables to help keep them connected to their mounting points. Textured tips let you easily push the keepers into position. Durable polypropylene won't fade or corrode.
Replaces the spacer bracket for installing diverter control handles on your B&B RV Nautilus P3 or P4 panel. Spans the distance from the valve to the back of the panel for added support and smooth operation.
You want a better view behind you, but you're not looking to add an extra screen inside your vehicle. This touchscreen rear view mirror gives you a full LCD camera display right on the mirror. Just add your own camera, and you're set.
Add this heavy-duty camera to your Brandmotion monitor and improve your driving experience. Get a wide, clear view, parking lines, and low-light vision, so you always know what's behind you. Plus, the low-profile design is less obtrusive.
You built your own setup, so you want a camera that's just as flexible. This bullet camera gives you a wide, adjustable rear view and a low-profile install, so you can upgrade your aftermarket display and see what's really behind you.
You're capping off the pipe where the sewer hose is stored. The old one's gone or doesn't stay on. This one presses in for a snug, secure fit. It's a direct OEM match made to seal it off and keep things in place.
You're getting ready to fill your fresh tank and realize the cap's missing. Again. This replacement screws in where the old one was and stays put with the attached strap. One less thing to lose every time you fill up.
When you bleed pressure just to swap tools or close a line, you lose time waiting for your compressor to recover. This in-line valve lets you shut things off with a quarter turn and hold pressure in the system so you can keep working.
Control your vehicle's lights, air compressor, batteries, air lockers, and more, all from a single 8-switch panel. Control box mounts under the hood and powers switch panel via the included wiring harness.
Some valve stems are tucked behind a fender or sit at a weird angle. This short, flexible hose gives you a little slack at the valve so you can connect the chuck without bending the main line or working at an awkward angle.
Some air chucks leak or pop off unless you hold them in place. This one pushes on and locks down so you can let go while the tire inflates. The internal shut-off keeps air in the system when it's not connected to a valve.