New Arrivals

Replace a worn or leaking copper washer on your Dexter disc brake caliper. This 7/16" crush washer provides a tight, reliable seal between the banjo fitting and caliper to help prevent brake fluid leaks in your hydraulic braking system.

• Accessories and Parts
• Trailer Brakes
• Disc Brakes
• Hardware
• Caliper Parts
• Washers
• Dexter

This replacement inner member slide easily fits into the existing housing of your Dexter XR84 or Legacy UFP surge brake actuator. For use with triple-axle trailers with hydraulic disc brakes.

• Accessories and Parts
• Brake Actuator
• Disc Brakes
• Inner Member
• Dexter

Replaces the protective top cap on Dexter 12,000-lb hydraulic jack add-on with selector valve; keeps internal components shielded from debris and moisture.

• Accessories and Parts
• Trailer Jack
• Electric Winch
• Caps
• Dexter

Replaces 1 caliper retaining shoulder bolt on your Dexter 10K and 12K hydraulic disc brake caliper.

• Accessories and Parts
• Trailer Brakes
• Disc Brakes
• 6000 lbs
• 8000 lbs
• 7000 lbs
• Caliper Parts
• Hardware
• Bolts
• Dexter

Replacement zerk for trailer hubs with Dexter Axle EZ Lube spindles

• Accessories and Parts
• Trailer Spindles
• Grease Zerk
• Dexter

This replacement inner member slide easily fits into the existing housing of your Dexter XR84 or Legacy UFP surge brake actuator. For use with single or tandem-axle trailers with hydraulic disc brakes.

• Accessories and Parts
• Brake Actuator
• Disc Brakes
• Inner Member
• Dexter

Replaces the "D" washers, retainer nuts, and hex nuts needed to secure the brake hubs on your Dexter trailer axle manufactered after June of 2002. Includes 2 "D" washers, 2 retainer nuts, and 2 hex nuts.

• Accessories and Parts
• Trailer Spindles
• Trailer Axles
• Trailer Suspension Parts
• Spindle Retainer Kit
• Dexter

This 48" cable can be used to connect a solar charge controller to an RV's SAE port. The wire ends can also be used with a new connector part to create a simple adapter cable.

• Accessories and Parts
• Solar Charge Controllers
• RV Solar Panels
• Cables and Connectors
• Adapters
• etrailer

Replaces the stopper in a LaSalle Bristol drains for bathroom sinks. Includes ring seal so you can fill your sink with water without it slowly draining out.

• Accessories and Parts
• RV Sinks
• Sink Stopper
• White
• LaSalle Bristol

Replaces the rubber gaskets on your LaSalle Bristol black-water waste valve. Prevents sewer water from slowly leaking out of the valve. Includes two seals for both sides of the valve.

• Accessories and Parts
• RV Waste Valves
• Waste Valve Parts
• Seals
• LaSalle Bristol

Pipe assembly connects both drains in your dual-basin sink to a single 1-1/2" pipe. Seals included. Made of ABS plastic. Measures 11" center to center.

• Accessories and Parts
• Rv Sinks
• Drain Connector
• LaSalle Bristol

Repair the worn out motor and mounting brackets for your Motodrain waste valve.

• Accessories and Parts
• RV Waste Valves
• Motor
• LaSalle Bristol

Replace two 8mm lower wheel cradles on your Jack-IT Original Plus and other V-rack model bike racks. Supports the lower wheels on one bicycle.

• Accessories and Parts
• RV and Camper Bike Racks
• Cradle and Arm Parts
• Cradles
• Lets Go Aero

Set of 2 safety-chain anchors work with your Ford and GMC factory-installed underbed gooseneck trailer hitch.

• Accessories and Parts
• Gooseneck Hitch
• Safety Chain Loops
• Gen-Y Hitch

This shock-absorbing shank gives you 10 mounting positions for attaching your weight distribution system. Flexing rubber cords limit shock. Tongue weight scale shows if load needs to be adjusted. Works with most standard weight distribution systems.

• Accessories and Parts
• Weight Distribution Hitch
• Shanks
• 1600 lbs TW
• Fits 2 Inch Hitch
• Square - 9 Inch Drop
• Gen-Y Hitch

Deter wobble and get maximum stability as you tow with this stabilizer kit. Insert the shank end into one of the 2-1/2" stacked receivers on your Gen-Y adjustable ball mount and attach the brackets on the other end to your vehicle's frame.

• Accessories and Parts
• Drop Hitch
• Trailer Hitch Ball Mount
• Stabilizer Bars
• Gen-Y Hitch

6' Tall hitch-mounted flagpole is great for showing your pride when tailgating on game day, at rallies, parades or anywhere you need to express yourself. Tilts down for easy access to your cargo area. Holds a 3' x 5' flag.

• Accessories and Parts
• Trailer Hitch
• Flagpole
• Gen-Y Hitch

Upgrade your Curt Q-Series or A-Series hitch to a combo hitch so you can tow your gooseneck trailer without having to go through the pain of hauling your heavy 5th-wheel hitch out of the truck bed.

• Accessories and Parts
• 5th Wheel Hitch
• Combo Hitch
• Gen-Y Hitch

Replaces the surge protection module for your second generation 50-amp Hughes Watchdog surge protector (PWD50EPOW).

• Accessories and Parts
• RV Surge Protectors
• Surge Module
• 50 Amp
• Hughes Autoformers

Replaces the surge protection module for your second generation 30-amp Hughes Watchdog surge protector (PWD30EPOW).

• Accessories and Parts
• RV Surge Protectors
• Surge Module
• 30 Amp
• Hughes Autoformers

Replaces a brass bleed port on your Hydrastar caliper. Designed for use with Hydrastar disc brake systems.

• Accessories and Parts
• Trailer Brakes
• Disc Brakes
• Caliper Parts
• Bleed Valve
• Hydrastar

Replaces the ceramic brake pads for your Hydrastar disc brakes with 225 calipers. Works with 303-E36C and 303-E36CSS calipers. Includes 4 brake pads.

• Accessories and Parts
• Trailer Brakes
• Disc Brakes
• Brake Pads
• Hydrastar

Replace lost or damaged hardware for your MaxxAir MaxxFan Deluxe roof vent fan. Designed for a perfect fit with all MaxxAir MaxxFan Deluxe models.

• Accessories and Parts
• RV Vents and Fans
• Hardware
• MAXXAIR

Pop these durable polycarbonate spacers onto the pivot bar of your Mad-Ramps setup (MR54FR) to keep the ramps from shifting side to side.

• Accessories and Parts
• Truck Ramps
• ATV Ramps
• Spacers
• Mad-Ramps