New Arrivals

Pigtail makes the connection from the propane tanks on your trailer to the propane regulator. Also used to connect tanks to a high-pressure regulator to carry gas to a 2-stage regulator.

• Propane Fittings
• Hoses
• Pigtail Hoses
• 1-1/2 Feet Long
• Type 1 - Female
• 1/4 Inch - Male NPT
• JR Products

This adapter is required to use your JR Products LP Gas Manifold. 1/2" Manifold x 3/8" flare SAE adapter screws onto your existing RV manifold hose so you can simply plug it in to your manifold block.

• Propane Fittings
• Adapter Fittings
• 3/8 Inch - Male Flare
• JR Products

There's a lot of useful ways to use this quick-disconnect propane port on your RV or hose. Mount outside your RV for a convenient port for cooking outside, or use it as an adapter on an auxiliary tank or hose to create a new QD connection.

• Propane Fittings
• Adapter Fittings
• 1/4 Inch - Female NPT
• 1/4 Inch - Female QD
• JR Products

Replace the broken catch on your storage doors with strong and simple magnets. Includes two magnets per set and mounting hardware. A great upgrade if you're done fumbling around with those manual, hook-style catches.

• RV Door Parts
• Compartment Door
• Holders
• Magnetic
• White
• JR Products

Connect up to 2 appliances to your RV's LP gas line with this simple plug and go manifold - no frustrating teflon tape needed! Enjoy the flexibility of powering up your appliances from one central point while minimizing safety risks.

• Propane Fittings
• Manifolds
• JR Products

This adapter is required to use your JR Products LP Gas Manifold. 1/2" Manifold x 1/4" NPT adapter screws onto your existing RV manifold hose so you can simply plug it in to your manifold block.

• Propane Fittings
• Adapter Fittings
• 1/4 Inch - Male NPT
• JR Products

Use this adapter fitting to create a connection point on your appliance for a quick-disconnect hose. 1/4" Male NPT fitting threads onto propane hoses or directly onto appliances for simple hookups without hand tightening.

• Propane Fittings
• Adapter Fittings
• 1/4 Inch - Male NPT
• 1/4 Inch - Female NPT
• JR Products

Replace the broken catch on your storage doors with strong and simple magnets. Includes two magnets per set and mounting hardware. A great upgrade if you're done fumbling around with those manual, hook-style catches.

• RV Door Parts
• Compartment Door
• Holders
• Magnetic
• Black
• JR Products

Connect up to 3 propane appliances to your RV's LP gas line with this simple plug and go manifold - no frustrating teflon tape needed! Enjoy the flexibility of powering up your appliances from one central point while minimizing safety risks.

• Propane Fittings
• Manifolds
• JR Products

Put a quick disconnect on your RV, supply hose, appliance, or anywhere else you want one. There's a variety of uses, and this kit gives you both male and female connectors to adapt 1/4" NPT fittings.

• Propane Fittings
• Adapter Fittings
• 1/4 Inch - Female NPT
• 1/4 Inch - Male NPT
• JR Products

Connect up to 4 propane appliances to your RV's LP gas line with this simple plug and go manifold - no frustrating teflon tape needed! Enjoy the flexibility of powering up your appliances from one central point while minimizing safety risks.

• Propane Fittings
• Manifolds
• JR Products

Expand your outdoor kitchen with the ability to run two appliances off a single propane tank. Plug into the Quick Disconnect port on your RV to create two female connectors. Then you can use a cooktop and heater at the same time.

• Propane Fittings
• Adapter Fittings
• 1/4 Inch - Male QD
• 1/4 Inch - Female QD
• JR Products

Pigtail makes the connection from the propane tanks on your trailer to the propane regulator. Also used to connect tanks to a high-pressure regulator to carry gas to a 2-stage regulator.

• Propane Fittings
• Hoses
• Pigtail Hoses
• 1 Foot Long
• Type 1 - Female
• 1/4 Inch - Male NPT
• JR Products

Connect up to 5 propane appliances to your RV's LP gas line with this simple plug and go manifold - no frustrating teflon tape needed! Enjoy the flexibility of powering up your appliances from one central point while minimizing safety risks.

• Propane Fittings
• Manifolds
• JR Products

Replaces the extended cross-member for your DK2 snow plow. Provides the connection point to quickly attach and remove your snow plow.

• Snow Plow Parts
• Detail K2 Plow Parts
• Frame Parts
• Crossmember
• Detail K2

These brackets provide the necessary attachment points for Detail K2 Rampage II, Rampage II Elite, Storm II, Storm II, Summit II and Summit II snowplows. Designed to fit close to your vehicle without protruding out beyond the bumper.

• Snow Plow Parts
• Detail K2 Plow Parts
• Frame Parts
• Mounting Brackets
• Detail K2

Radial tire has a ply rating of 10 and a 3,520-lb maximum load at 85 psi. The 16" diameter x 6" wide steel trailer wheel has a 8 on 6-1/2 bolt pattern and a corrosion resistant, black powder coat finish.

• Trailer Tires and Wheels
• Tire with Wheel
• Radial Tire
• Load Range E
• 235/80-16
• 16 Inch
• 8 on 6-1/2 Inch
• Steel Wheels - Powder Coat
• Kenda

Replaces the 48" long aluminum hydraulic actuator for your RV slide-out. Includes a 33" stroke and a 1-1/2" bore.

• RV Slide Out Parts
• Hydraulic Parts
• Actuator
• Lippert

Replaces the aluminum hydraulic actuator for your through-frame RV slide-out. Includes a 43" stroke and a 1-1/2" bore.

• RV Slide Out Parts
• Hydraulic Parts
• Actuator
• Lippert Through-Frame Slide-Out Systems
• Lippert

When space runs out inside your RV, this hitch gives you options. Now you can add a bike rack or cargo carrier to the back so your RV stays clean and comfortable. No need to leave anything behind, or trip over it every time you walk to the fridge.

• RV and Camper Hitch
• Frame Mount Hitch
• 18 - 69 Inch Wide Frame
• 300 lbs TW
• Bolt-On
• Lippert

Get easy access to your truck bed, roof rack, van, or cargo area with this hitch-mounted step. 42" Wide step provides room for 2 people. Slides into your 2" hitch receiver. Serrated surface helps keep you from slipping off the step.

• Hitch Step
• Truck Bed Step
• Fixed Step
• Standard Step
• 3 Inch Deep
• 600 lbs
• 42 Inch Wide
• Steel
• Gen-Y Hitch

Get easy access to your truck bed, roof rack, or cargo area with this hitch-mounted step. Slides into your 2-1/2" hitch receiver with 3/4" accessory pin holes. Serrated surface helps keep you from slipping off the step.

• Truck Bed Step
• Hitch Step
• Fixed Step
• Standard Step
• 2 Inch Deep
• 500 lbs
• 13 Inch Wide
• Steel
• Gen-Y Hitch

Hit the road without second-guessing your setup. This Voyager is built to smooth out the bumps and take the stress out of towing. Haul gear for the weekend or tow a small trailer with confidence. Just add your own hitch ball and roll.

• Trailer Hitch Ball Mount
• Fixed Ball Mount
• One Ball
• Steel Shank - Matte Black
• 7000 lbs GTW
• Shock Absorbing
• Gen-Y Hitch

Mount this coupler in an adjustable channel (sold separately) so you can hook up your trailer to your tow vehicle. SnapLatch ensures fast, easy, secure hookup and disconnect. Powder coated steel is sturdy and corrosion resistant.

• Adjustable Trailer Coupler
• Coupler Only
• 3 Inch Channel
• 20000 lbs GTW
• 2-5/16 Inch Ball Coupler
• Powder Coat Finish
• Gen-Y Hitch