New Arrivals

Take control of every turn with the PullRite SuperGlide Capture Plate! Built for 12-1/2" MOR/ryde pin boxes, it locks in a secure hitch connection, smooth auto sliding & stress-free towing. Durable, easy to install & ready for the long haul.

• Accessories and Parts
• 5th Wheel Pin Box
• Locking Plate
• MORryde Pin Box
• Pullrite

Use this plate to keep your trailer's king pin from rotating in your PullRite SuperGlide hitch. A capture plate is required for you to tow with the SuperGlide. This plate fits Lippert 1621 pin boxes with skid plates that are 12-3/4" wide.

• Accessories and Parts
• 5th Wheel Pin Box
• Locking Plate
• Trailair Pin Box
• Pullrite

Protect the finish on your hitch and truck bed with these lube plates. Designed for the #2600 SuperLite 20K and #3900 Super 5th 24K hitches, these durable nylon plates reduce friction and eliminate the need for messy lubricants.

• Accessories and Parts
• 5th Wheel Hitch
• Plates
• Lube Plate
• Pullrite

Use this plate to keep your trailer's king pin from rotating in your PullRite SuperGlide hitch. A capture plate is required for you to tow with the SuperGlide. This plate fits Flex Air pin boxes with skid plates that are 13-1/4" wide.

• Accessories and Parts
• 5th Wheel Pin Box
• Locking Plate
• Trailair Pin Box
• Pullrite

Mount your Traditional Series PullRite SuperGlide hitch to industry standard base rails or gooseneck mounts using this adapter kit. Works with 4100, 4400, and discontinued 3300 models. Base rails sold separately.

• Accessories and Parts
• 5th Wheel Hitch Rails
• Adapters
• Rail Adapter
• Pullrite

Replace a lost or damaged bracket or install one in a second vehicle to easily transfer your Curt NEXT brake controller. The low-profile design installs above or below the dash and includes multiple mounting options for a secure, unobtrusive fit.

• Accessories and Parts
• Trailer Brake Controller
• Mounting Hardware
• Brackets
• CURT

For heavy-duty applications that require cable, this steel winch cable has a break strength of 5,600 lbs and a working load limit of 1,865 lbs.

• Accessories and Parts
• Electric Winch
• Trailer Winch
• Cables and Straps
• 7/32 Inch Diameter
• 5600 lbs
• Wire Rope
• CURT

For heavy-duty applications, this strap has a break strength of 4,800 lbs and a working load limit of 1,600 lbs.

• Accessories and Parts
• Trailer Winch
• Cables and Straps
• 22-3/8 Inch Wide
• 1600 lbs
• Straps
• CURT

EVs put more stress on tires. Counteract EV Lube locks them in. This synthetic, non-petroleum formula adds extreme adhesion to reduce slippage and protect beads and rims. A secure fit means better performance, longer tire life, and peace of mind.

• Accessories and Parts
• Boat Trailer Wheels
• Trailer Tires and Wheels
• Tire Mounting Compound
• Counteract

Tired of cranking, bouncing, or backing in too deep at the ramp? Slydz-On helps your boat slide off and onto your trailer bunks smoother, without the mess of grease or installing rollers. Just spray it on, let it dry, and let it work.

• Accessories and Parts
• Boat Trailer Parts
• Lubricant
• Sprays
• Caliber

For heavy-duty applications that require cable, this steel winch cable has a break strength of 4,200 lbs and a working load limit of 1,400 lbs.

• Accessories and Parts
• Electric Winch
• Trailer Winch
• Cables and Straps
• 3/16 Inch Diameter
• 4200 lbs
• Wire Rope
• CURT

Replace the lost or damaged center pin for your Curt PowerRide fifth-wheel trailer hitch. Pin secures the 5th wheel head to the hitch body.

• Accessories and Parts
• 5th Wheel Hitch
• Pins and Clips
• CURT

This breakaway switch sounds an alarm when the pin is pulled, so you know it's working. Wire it into your trailer's brake system so if your trailer becomes uncoupled it will activate the trailer brakes, giving you time to move to safety.

• Accessories and Parts
• Trailer Breakaway Kit
• Switches
• ESCO

Keep your trailer plug off the ground and out of the dirt with this holder. Secures to your trailer and gives you a spot to clip your breakaway cable when it's not in use. Fits 7-way plug.

• Accessories and Parts
• Trailer Wiring
• Wiring
• Custom Fit Vehicle Wiring
• Plug Holder
• ESCO

New adventures are exciting, but leaving your bike unattended isn't. These wheel locks secure your bikes to the rack, deterring thieves and giving you peace of mind. Your ride will stay safe while you take a break or gear up for the next journey.

• Accessories and Parts
• Hitch Bike Racks
• Lock Parts
• Wheel Locks
• Crosstrack
• Hollywood Racks

If you leave everything on the trail and are completely gassed when you're done cycling, you're not gonna want to lift your bike onto a rack before heading home. The Crosstrack Ramp lets you to roll your ride into place and hit the road.

• Accessories and Parts
• Hitch Bike Racks
• Ramps
• Crosstrack
• Hollywood Racks

Replaces the end cap with reflector for Hollywood Racks RV Rider (HR1600 or HR1700) or Sport Rider (HR1400, HR1450, HR1450-E, HR1450-R, or HR1455-E) bike rack. Fits 2" square tubing.

• Accessories and Parts
• RV and Camper Bike Racks
• Hitch Bike Racks
• End Caps
• Sport Rider
• RV Rider
• Hollywood Racks

Cyclings supposed to be about the ride, not fighting with knobs or hunting for tools. These toolless adjustment dials let you switch wheel sizes with a quick twist, so your bike fits snug and you're rolling in seconds.

• Accessories and Parts
• Hitch Bike Racks
• Wheel Holds
• Knobs
• Crosstrack
• Hollywood Racks

Replaces 1 knob for your Hollywood Racks Traveler bike rack (HR8500). Knob has 3" long x 5/16" diameter bolt with 18 threads per inch.

• Accessories and Parts
• Hitch Bike Racks
• Knobs
• Hollywood Racks

Replaces the support bracket for your Hollywood Racks RV Rider (HR1600 or HR1700) or Sport Rider SE (HR1450E-Z or HR1455E-Z) bike rack. Does not include carriage bolts (sold separately).

• Accessories and Parts
• Hitch Bike Racks
• RV and Camper Bike Racks
• Hardware
• Brackets
• RV Rider
• Sport Rider
• Hollywood Racks

When you're hauling your prized bikes, staying visible matters. This LED bar lights up your brake signals, turn indicators, and flashers, so even if your ride runs past sunset, other drivers know exactly where you are and what you're doing.

• Accessories and Parts
• Hitch Bike Racks
• Lights
• Light Bar
• Crosstrack
• Hollywood Racks

Early starts, late returns - some adventures just don't stick to daylight hours. The Destination E LED Light Bar helps keep you visible when it counts, making sure other drivers see you, your vehicle, and the gear you're hauling.

• Accessories and Parts
• Hitch Bike Racks
• Lights
• Light Bar
• Destination
• Hollywood Racks

Replaces the main beam for your Hollywood Racks RV Rider bike rack (HR1600 or HR1700).

• Accessories and Parts
• Hitch Bike Racks
• Shanks and Adapters
• Main Assembly
• Hollywood Racks

Replaces the DC power cord for your BrakeBuddy Vantage (39504), Select 2 (39523), or Select 3 (39524) portable braking system.

• Accessories and Parts
• Flat Tow Brake System
• Wiring
• Power Cord
• Brake Buddy