New Arrivals

Replace the broken catch on your storage doors with strong and simple magnets. Includes two magnets per set and mounting hardware. A great upgrade if you're done fumbling around with those manual, hook-style catches.

• RV Door Parts
• Compartment Door
• Holders
• Magnetic
• White
• JR Products

Connect up to 2 appliances to your RV's LP gas line with this simple plug and go manifold - no frustrating teflon tape needed! Enjoy the flexibility of powering up your appliances from one central point while minimizing safety risks.

• Propane Fittings
• Manifolds
• JR Products

This adapter is required to use your JR Products LP Gas Manifold. 1/2" Manifold x 1/4" NPT adapter screws onto your existing RV manifold hose so you can simply plug it in to your manifold block.

• Propane Fittings
• Adapter Fittings
• 1/4 Inch - Male NPT
• JR Products

Use this adapter fitting to create a connection point on your appliance for a quick-disconnect hose. 1/4" Male NPT fitting threads onto propane hoses or directly onto appliances for simple hookups without hand tightening.

• Propane Fittings
• Adapter Fittings
• 1/4 Inch - Male NPT
• 1/4 Inch - Female NPT
• JR Products

Replace the broken catch on your storage doors with strong and simple magnets. Includes two magnets per set and mounting hardware. A great upgrade if you're done fumbling around with those manual, hook-style catches.

• RV Door Parts
• Compartment Door
• Holders
• Magnetic
• Black
• JR Products

Connect up to 3 propane appliances to your RV's LP gas line with this simple plug and go manifold - no frustrating teflon tape needed! Enjoy the flexibility of powering up your appliances from one central point while minimizing safety risks.

• Propane Fittings
• Manifolds
• JR Products

Put a quick disconnect on your RV, supply hose, appliance, or anywhere else you want one. There's a variety of uses, and this kit gives you both male and female connectors to adapt 1/4" NPT fittings.

• Propane Fittings
• Adapter Fittings
• 1/4 Inch - Female NPT
• 1/4 Inch - Male NPT
• JR Products

Connect up to 4 propane appliances to your RV's LP gas line with this simple plug and go manifold - no frustrating teflon tape needed! Enjoy the flexibility of powering up your appliances from one central point while minimizing safety risks.

• Propane Fittings
• Manifolds
• JR Products

Expand your outdoor kitchen with the ability to run two appliances off a single propane tank. Plug into the Quick Disconnect port on your RV to create two female connectors. Then you can use a cooktop and heater at the same time.

• Propane Fittings
• Adapter Fittings
• 1/4 Inch - Male QD
• 1/4 Inch - Female QD
• JR Products

Pigtail makes the connection from the propane tanks on your trailer to the propane regulator. Also used to connect tanks to a high-pressure regulator to carry gas to a 2-stage regulator.

• Propane Fittings
• Hoses
• Pigtail Hoses
• 1 Foot Long
• Type 1 - Female
• 1/4 Inch - Male NPT
• JR Products

Connect up to 5 propane appliances to your RV's LP gas line with this simple plug and go manifold - no frustrating teflon tape needed! Enjoy the flexibility of powering up your appliances from one central point while minimizing safety risks.

• Propane Fittings
• Manifolds
• JR Products

Replaces the extended cross-member for your DK2 snow plow. Provides the connection point to quickly attach and remove your snow plow.

• Snow Plow Parts
• Detail K2 Plow Parts
• Frame Parts
• Crossmember
• Detail K2

These brackets provide the necessary attachment points for Detail K2 Rampage II, Rampage II Elite, Storm II, Storm II, Summit II and Summit II snowplows. Designed to fit close to your vehicle without protruding out beyond the bumper.

• Snow Plow Parts
• Detail K2 Plow Parts
• Frame Parts
• Mounting Brackets
• Detail K2

Replaces the gear motor assembly with pin and connector for your Lippert Components slide-out system.

• RV Slide Out Parts
• Motor Parts
• Motor
• Lippert Slide-Out Systems
• Lippert

Includes the components needed to repair your Schwintek in-wall RV slide-out system.

• RV Slide Out Parts
• Roller Parts
• Roller
• Lippert In-Wall RV Slide-Out Systems
• Lippert

Replace your RV's old or damaged awning roller and fabric with this heavy-duty assembly. Fits Solera 15' power awnings with a built-in LED strip that extend 8' from your RV. Installs more easily than replacing just the fabric.

• RV Awnings
• Roller and Fabric Kits
• Extends 96 Inches
• White Fade
• Lippert

Replaces the aluminum hydraulic actuator for your through-frame RV slide-out. Includes a 41" stroke and a 1-1/2" bore.

• RV Slide Out Parts
• Motor Parts
• Actuator
• Lippert

Drop anchor anywhere that has a sandy or muddy seabed. Flukes adjust for different conditions. Disassembles for easy storage. Lightweight aluminum is anodized to make it last.

• Boat Anchor
• Fluke Anchor
• Mud
• Sand
• Aluminum
• 40-50 Feet Long
• 30-35 Feet Long
• 35-40 Feet Long
• Lewmar

Get all the things you need to steady your 16' to 24' long boat with this kit. Includes an aluminum fluke anchor, rope, and chain. Works well for sandy and muddy seabeds. Flukes adjust for different conditions. Disassembles for easy storage.

• Boat Anchor
• Fluke Anchor
• Mud
• Sand
• Aluminum
• 20-25 Feet Long
• 15-20 Feet Long
• 160 Feet Long
• Lewmar

This anchor rode includes 200' of 8-plait rope, 10' of G4 chain, and a shackle to connect the anchor. Nylon rope resists fraying and stiffening. Chain is galvanized and welded for durability. Ideal for Lewmar windlass gypsies.

• Boat Anchor
• Anchor Rode
• 210 Feet Long
• Lewmar

This anchor rode includes 100' of 3-strand rope, 5' of G4 chain, and a shackle to connect the anchor. Nylon rope resists fraying and stiffening. Chain is galvanized and welded for durability.

• Boat Anchor
• Anchor Rode
• 105 Feet Long
• Lewmar

Hold your boat steady with this galvanized steel anchor by Lewmar. Corrosion-resistant and easy to handle, this anchor is ideal for sandy and muddy seabeds.

• Boat Anchor
• Fluke Anchor
• Sand
• Mud
• Galvanized Steel
• 15-20 Feet Long
• 20-25 Feet Long
• 25-30 Feet Long
• Lewmar

Get all the things you need to steady your 16' to 30' long boat with this kit. Includes a galvanized steel fluke anchor, rope, and chain. Works well for sandy and muddy seabeds.

• Boat Anchor
• Fluke Anchor
• Sand
• Mud
• Galvanized Steel
• 15-20 Feet Long
• 25-30 Feet Long
• 20-25 Feet Long
• 105 Feet Long
• Lewmar

Hold your boat steady with this galvanized steel anchor by Lewmar. Corrosion-resistant and easy to handle, this anchor is ideal for sandy and muddy seabeds.

• Boat Anchor
• Fluke Anchor
• Mud
• Sand
• Galvanized Steel
• 35-40 Feet Long
• 25-30 Feet Long
• 30-35 Feet Long
• Lewmar