New Arrivals

Connect up to 2 appliances to your RV's LP gas line with this simple plug and go manifold - no frustrating teflon tape needed! Enjoy the flexibility of powering up your appliances from one central point while minimizing safety risks.

• Propane Fittings
• Manifolds
• JR Products

This adapter is required to use your JR Products LP Gas Manifold. 1/2" Manifold x 1/4" NPT adapter screws onto your existing RV manifold hose so you can simply plug it in to your manifold block.

• Propane Fittings
• Adapter Fittings
• 1/4 Inch - Male NPT
• JR Products

Use this adapter fitting to create a connection point on your appliance for a quick-disconnect hose. 1/4" Male NPT fitting threads onto propane hoses or directly onto appliances for simple hookups without hand tightening.

• Propane Fittings
• Adapter Fittings
• 1/4 Inch - Male NPT
• 1/4 Inch - Female NPT
• JR Products

Replace the broken catch on your storage doors with strong and simple magnets. Includes two magnets per set and mounting hardware. A great upgrade if you're done fumbling around with those manual, hook-style catches.

• RV Door Parts
• Compartment Door
• Holders
• Magnetic
• Black
• JR Products

Connect up to 3 propane appliances to your RV's LP gas line with this simple plug and go manifold - no frustrating teflon tape needed! Enjoy the flexibility of powering up your appliances from one central point while minimizing safety risks.

• Propane Fittings
• Manifolds
• JR Products

Put a quick disconnect on your RV, supply hose, appliance, or anywhere else you want one. There's a variety of uses, and this kit gives you both male and female connectors to adapt 1/4" NPT fittings.

• Propane Fittings
• Adapter Fittings
• 1/4 Inch - Female NPT
• 1/4 Inch - Male NPT
• JR Products

Connect up to 4 propane appliances to your RV's LP gas line with this simple plug and go manifold - no frustrating teflon tape needed! Enjoy the flexibility of powering up your appliances from one central point while minimizing safety risks.

• Propane Fittings
• Manifolds
• JR Products

Expand your outdoor kitchen with the ability to run two appliances off a single propane tank. Plug into the Quick Disconnect port on your RV to create two female connectors. Then you can use a cooktop and heater at the same time.

• Propane Fittings
• Adapter Fittings
• 1/4 Inch - Male QD
• 1/4 Inch - Female QD
• JR Products

Pigtail makes the connection from the propane tanks on your trailer to the propane regulator. Also used to connect tanks to a high-pressure regulator to carry gas to a 2-stage regulator.

• Propane Fittings
• Hoses
• Pigtail Hoses
• 1 Foot Long
• Type 1 - Female
• 1/4 Inch - Male NPT
• JR Products

Connect up to 5 propane appliances to your RV's LP gas line with this simple plug and go manifold - no frustrating teflon tape needed! Enjoy the flexibility of powering up your appliances from one central point while minimizing safety risks.

• Propane Fittings
• Manifolds
• JR Products

Replaces the extended cross-member for your DK2 snow plow. Provides the connection point to quickly attach and remove your snow plow.

• Snow Plow Parts
• Detail K2 Plow Parts
• Frame Parts
• Crossmember
• Detail K2

These brackets provide the necessary attachment points for Detail K2 Rampage II, Rampage II Elite, Storm II, Storm II, Summit II and Summit II snowplows. Designed to fit close to your vehicle without protruding out beyond the bumper.

• Snow Plow Parts
• Detail K2 Plow Parts
• Frame Parts
• Mounting Brackets
• Detail K2

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.

• Trailer Hitch
• Custom Fit Hitch
• Class III
• 350 lbs TW
• 3500 lbs GTW
• Visible Cross Tube
• Draw-Tite

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.

• Trailer Hitch
• Custom Fit Hitch
• Class IV
• 350 lbs TW
• 3500 lbs GTW
• Concealed Cross Tube
• Draw-Tite

This sturdy ball mount slides into your hitch receiver so you can easily hook up your trailer's coupler to the included 2" hitch ball. Powder coated shank and chrome ball resist rust and corrosion. Pin and clip included.

• Trailer Hitch Ball Mount
• Drop Hitch
• Fixed Ball Mount
• One Ball
• 2 Inch Ball
• Steel Shank - Gloss Black
• Drop - 4 Inch
• Rise - 2 Inch
• 7500 lbs GTW
• Draw-Tite

Built for strength and reliability, this Draw-Tite hitch features a fully welded design and no-drill installation. The rust-resistant e-coat and powder coat finish ensure lasting durability for towing trailers, campers, and hitch-mounted accessories.

• Trailer Hitch
• Custom Fit Hitch
• Class III
• 350 lbs TW
• 3500 lbs GTW
• Concealed Cross Tube
• Draw-Tite

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.

• Trailer Hitch
• Custom Fit Hitch
• Class III
• 500 lbs TW
• 5000 lbs GTW
• 5000 lbs WD GTW
• 500 lbs WD TW
• Concealed Cross Tube
• Draw-Tite

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.

• Trailer Hitch
• Custom Fit Hitch
• Class III
• 150 lbs TW
• 1500 lbs GTW
• Concealed Cross Tube
• Draw-Tite

Lighter-duty ratcheting chain binder commonly used for utility trailers and on farms where you need versatile equipment to secure loads of all kinds. The 5/16" grab hooks are rated for up to G70 chain use, which allows you a 4,700-lb Load limit.

• Car Tie Down Straps
• Chain Binders
• Tie Down Straps
• Ratchet Chain Binder
• Grab Hooks
• 4700 lbs
• 10-3/4 Inch Handle
• 1/4 - 5/16 Inch Chain Links
• Red
• Durabilt

Manual load binder that requires spinning the barrel by hand to quickly increase chain tension to secure your cargo or equipment. Sliding center handle provides leverage when needed and a single jam nut holds tension for load limits up to 7,300 lbs.

• Car Tie Down Straps
• Chain Binders
• Tie Down Straps
• Rapid Chain Binder
• Grab Hooks
• 7300 lbs
• 10 Inch Handle
• 5/16 - 3/8 Inch Chain Links
• Red
• Durabilt

Heavy duty ratchet binder built for contractors, haulers, and drivers who need versatile equipment to secure heavy loads of all kinds. The 3/8" grab hooks are rated for up to G80 chain use, which allows you an 8,800-lb load limit.

• Chain Binders
• Car Tie Down Straps
• Tie Down Straps
• Ratchet Chain Binder
• Jaw Fittings
• Grab Hooks
• 8800 lbs
• 15-1/2 Inch Handle
• 5/16 - 3/8 Inch Chain Links
• Red
• Durabilt

This logistics strap is equipped with steel ends that fit into vertical or horizontal E tracks installed in enclosed cargo trailers. Ratcheting buckle tightens and locks strap in place to secure whatever you are carrying. 3,000 lbs Max load.

• ATV-UTV Tie Downs
• Tie Down Straps
• E Track
• Ratchet Straps
• E Track Straps
• 2 Inch Wide
• 1000 lbs
• Durabilt

• Car Tie Down Straps
• Tie Down Straps
• Chain Binders
• Ratchet Chain Binder
• Grab Hooks
• 18100 lbs
• 15 Inch Handle
• 1/2 - 5/8 Inch Chain Links
• Red
• Durabilt

Secure all kinds of gear to your truck bed, trailer, or cargo carrier with this utility load strap. S-hook ends are compatible with many anchor points. A cam buckle holds the supple strap tight over your cargo load. 2,400 lbs max load.

• Tie Down Straps
• ATV-UTV Tie Downs
• Motorcycle Tie Down Straps
• Boat Tie Downs
• Trailer
• Cargo Carrier
• Roof Rack
• Truck Bed
• S-Hooks
• Cam Buckle Strap
• Manual
• 11 - 20 Feet Long
• 0 - 1 Inch Wide
• 501 - 850 lbs
• Durabilt