With 20,000 Btu of heat, we recommend this built-in furnace for RVs about 20' long. It will get your RV nice and toasty far quicker than a space heater, and it includes a door so the unit can be serviced from the outside.
Stay nice and toasty on your fall or winter journeys by adding this doored furnace to your RV setup. This 12V DC powered furnace uses LP gas to heat your RV quickly and efficiently. Included black access door and thermostat.
This water heater's efficent 10,000 Btu burner recovers up to 12 gallons of water per hour. Unit is small and lightweight for an easy fit in your RV. Plus, it does not use an anode rod, so there's one less thing to maintain.
Replaces the dome, seal, slide, and pin on your Dometic FanTastic roof vent for motorhomes and enclosed trailers. Smoke-colored polyethylene dome filters UV rays while allowing light in.
Life on the road has its own rhythm, and this fridge moves with it. It keeps your food cold, your setup simple, and your plans open for wherever the road takes you, even off the grid.
With 30,000 Btu of heat, we recommend this built-in furnace for RVs about 30' long. It will get your RV nice and toasty far quicker than a space heater, and it includes a door so the unit can be serviced from the outside.
Made for full-season use, this RV furnace runs without shore power and delivers quiet, efficient heat wherever you travel. Soft Start tech eases power draw, and the airflow design helps warm your rig fast, taking the edge off those cold mornings.
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.
Built for strength and reliability, this Draw-Tite hitch features a fully welded design and no-drill installation. The rust-resistant e-coat and powder coat finish ensure lasting durability for towing trailers, campers, and hitch-mounted accessories.
Built for strength and reliability, this Draw-Tite hitch features a fully welded design and no-drill installation. The rust-resistant e-coat and powder coat finish ensure lasting durability for towing trailers, campers, and hitch-mounted accessories.
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.
Built for strength and reliability, this Draw-Tite hitch features a fully welded design and no-drill installation. The rust-resistant e-coat and powder coat finish ensure lasting durability for towing small trailers and hitch-mounted accessories.
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.
This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.
You deal with mud, rain, and cold mornings. This binder is made for all of it. Extend it out to reach your chains, then tighten it down or spin it free when you need to move fast. When the job's done, fold the handle away and hit the road.
Smooth and powerful hydraulic jack upgrades your existing hydraulic setup to lift your heavy load with a press of a button. The selector valve safely controls movement while the pivoting foot pad stabilizes the jack on rough terrain.
Shuddering brakes, trailer sway, or grinding under load? Worn drums and bearings put safety at risk. An ABS-ready hub built for Dexter's Tow Assist restores smooth braking, steady tracking, and the peace of mind to tow without second-guessing.
Replace worn DB-35 brakes with this complete Dexter disc brake kit for 3.5K axles. Includes 10" zinc rotors, bearings, seals, grease caps, and hardware for 1-3/8" straight spindles typically found on Ranger boats.
Protect your trailers wheel bearings with these 2.72" OD grease caps. Zinc-plated steel resists corrosion, and the drive-in design installs easily. Designed for 12" x 2" Dexter 8-bolt hubs. Includes 2 caps.
Smooth and powerful hydraulic jack kit includes everything you need to lift your heavy load with a press of a button. The selector valve safely controls movement while the pivoting foot pad stabilizes the jack on rough terrain.
Replacement U-Bolt plate helps to secure one end of your 2-3/8" diameter trailer axle to a 2" wide leaf spring. Designed for use with 3,500-lb, heavy-duty Dexter axles. 3/16" Thick steel plate ensures strength.