New Arrivals

Replaces 1 of the hard plastic cap plugs that install in the 2-1/2" square guide tubes on your Demco Autoslide fifth-wheel hitch. 2 Originally included with your hitch.

• Accessories and Parts
• 5th Wheel Hitch
• Plugs
• Slider
• Demco RV

Round tube welds onto your trailer. Works with 4" diameter inner tubes (sold separately). Pairs perfectly with the eZ-Latch gooseneck coupler DM73KV (sold separately).

• Accessories and Parts
• Gooseneck Coupler
• Outer Tube
• Demco

Grade 8 wheel stud fits DeeMaxx 13" hub-and-rotor assemblies, but its standard 9/16"-18 thread size will fit other hub assemblies just as well.

• Accessories and Parts
• Boat Trailer Wheels
• Trailer Hubs and Drums
• Trailer Tires and Wheels
• Wheel Studs
• 9/16 Inch Diameter
• Drive-In Stud
• DeeMaxx

Need a tough, reliable connection from your caliper to the main brake lines? The non-stick polymer core locks in pressure, while braided stainless steel fends off road debris. No ballooning, no leaks, just reliable stopping power.

• Accessories and Parts
• Brake Actuator
• Trailer Brakes
• Disc Brakes
• Hydraulic Drum Brakes
• 4 Feet Long
• Brake Lines
• Brake Line Components
• DeeMaxx

Replaces the caliper-mounting bracket for you a 10-16K Dexter/Lippert dual wheel axle, fits 11" rotor with 7 bolt flange.

• Accessories and Parts
• Trailer Brakes
• Disc Brakes
• 16000 lbs
• Caliper Parts
• Hardware
• Mounting Brackets
• DeeMaxx

Need a tough, reliable connection from your actuator to the main brake lines? The non-stick polymer core locks in pressure, while braided stainless steel fends off road debris. No ballooning, no leaks, just reliable stopping power.

• Accessories and Parts
• Trailer Brakes
• Brake Actuator
• Disc Brakes
• Hydraulic Drum Brakes
• 6 Feet Long
• Brake Lines
• Brake Line Components
• DeeMaxx

280" Line is most often used to connect your actuator to the rest of your hydraulic system. Brass fittings won't rust and are easier to work with than stainless steel.

• Accessories and Parts
• Brake Actuator
• Trailer Brakes
• Hydraulic Drum Brakes
• Disc Brakes
• 23-1/3 Feet Long
• Brake Lines
• Brake Line Components
• DeeMaxx

This stainless steel acorn lug nut laughs in the face of rust. Perfect for saltwater use, it stays strong and rust-free. No chipping, no peeling, just a tough, reliable fit that shrugs off moisture, salt, and road grime for the long haul.

• Accessories and Parts
• Boat Trailer Wheels
• Trailer Tires and Wheels
• Golf Cart Tires and Wheels
• Wheel Lug Nut
• 5/8 Inch Wheel Bolt
• Acorn Nut
• 60-Degree Cone
• Stainless Steel
• DeeMaxx

• Accessories and Parts
• Brake Actuator
• Hydraulic Drum Brakes
• Disc Brakes
• Adapters
• Deutsche Hydrapro

Replaces the DC power cord for your BrakeBuddy Vantage (39504), Select 2 (39523), or Select 3 (39524) portable braking system.

• Accessories and Parts
• Flat Tow Brake System
• Wiring
• Power Cord
• Brake Buddy

Replaces the extension plates for your Chock-N-Lock wheel stabilizers (71001-BX). Expands your wheel chock to stabilize your trailer when parked. Includes one pair of plates.

• Accessories and Parts
• Camper Jacks
• Wheel Chocks
• Extension Plate
• InfiniteRule

Locking pin secures your M1 Store Redeemer shackle from theft. Includes 2 keys.

• Accessories and Parts
• Tow Shackles
• Hook and Shackle Lock
• InfiniteRule

Heavy-duty, stainless steel locks provide superior security when locking your B&W hitch step to your B&W Tow and Stow 2" or 2-1/2" ball mount. Third-party-tested pin has a 42,000-lb shear strength.

• Accessories and Parts
• Hitch Step
• Pins and Clips
• InfiniteRule

Replaces the 20-pin, 3-wire power harness for your Jensen RV stereo (VR209TP).

• Accessories and Parts
• RV Stereos
• Power Harness
• Jensen

This handy 1/2" manifold plug works with your JR Products LP Gas Manifold to prevent leakage and keeps contaminates out for clean use.

• Accessories and Parts
• Propane Fittings
• Plugs
• Manifold
• JR Products

This all-purpose handle is commonly used next to your RV door to make it easier to get in and out, but it can easily be mounted anywhere you need to get a grip. Made with hard plastic for impact resistance and durability.

• Accessories and Parts
• RV Steps
• Grab Handles and Handrails
• Fixed Handle
• White
• JR Products

This all-purpose handle is commonly used next to your RV door to make it easier to get in and out, but it can easily be mounted anywhere you need to get a grip. Made with hard plastic for impact resistance and durability.

• Accessories and Parts
• RV Steps
• Grab Handles and Handrails
• Fixed Handle
• Black
• JR Products

Replacement plug fits on any female quick-disconnect port to keep out debris and moisture. Keeping that port clean is critical to create safe, secure connections and make sure the port works great for a long time.

• Accessories and Parts
• Propane Fittings
• Plugs
• JR Products

This screwdriver-like tool is required to disconnect hoses from your JR Products LP Gas Manifold.

• Accessories and Parts
• Propane Fittings
• Tools
• Manifold
• JR Products

Add extra sturdiness to a fold-out tray, slide-out camp kitchen, or portable table. Once installed, this table leg will fold flat against whatever you mount it to. Leg height adjusts in 1" increments from 22-1/2" up to 35-1/2"

• Accessories and Parts
• Camping Table
• Table Legs
• JR Products

Worn brake hoses reduce stopping power. This DOT-approved Kodiak hose seals tight for leak-proof braking and resists rust for long-lasting performance. Dead swivel ends prevent twisting during installation. Works with any 3/16" brake lines.

• Accessories and Parts
• Brake Actuator
• Hydraulic Drum Brakes
• Disc Brakes
• 4 Feet Long
• Brake Lines
• Brake Line Components
• Kodiak

Replace the spacer on your Kodiak K71-2R-11-10D-DDDD disc brake kit. Designed for 11" rotors with an 8 on 6-1/2" bolt pattern and 5/8" studs, it restores fit and function for your 10,000-lb axle, keeping disc brakes working smoothly.

• Accessories and Parts
• Trailer Brakes
• Disc Brakes
• 10000 lbs
• Rotors
• Rotor Spacers
• Kodiak

Caliper-mounting bracket is designed for use with 11.6" hub-and-rotor assemblies that have an 8 on 6-1/2 bolt pattern and 5/8" wheel bolts. Works with dually applications and mounts on 7-bolt, 10,000-lb Dexter brake flanges.

• Accessories and Parts
• Trailer Brakes
• Disc Brakes
• 10000 lbs
• Hardware
• Caliper Parts
• Mounting Brackets
• Kodiak

Replaces 2 caliper retaining clips and 2 retaining clip bolts on your Kodiak DBC-338-HD calipers.

• Accessories and Parts
• Trailer Brakes
• Disc Brakes
• Caliper Parts
• Bolts
• Kodiak