New Arrivals

Replace a missing or damaged lift knob on your MaxxFan Plus roof vent so you can still open or close the dome when power is out. 3-wing design gives you a solid grip and installs in seconds to keep fresh air flowing.

• Accessories and Parts
• RV Vents and Fans
• Roof Vent
• Operator Parts
• Knob
• MAXXAIR

Replaces the control keypad on your MAXXAIR MaxxFan Plus roof vent. Works with 4700CN, 4700G, 4900G, 4700D, 4900D, 4700N, 4900N, 4700CN, 4751KS, 4951KS, 4951KSC, 74951KS, and 74751KS model fans.

• Accessories and Parts
• RV Vents and Fans
• Roof Vent
• Control Panel
• MAXXAIR

J-style racks can tap out with wide yaks. This kit adds full-length, padded support to your truck or trailer - no pressure points, no hull dents, no wobble. Perfect for fishing kayaks or any setup that needs more than a strap and a prayer.

• Accessories and Parts
• Trailers
• Watersport Carriers
• Watersport Trailer Parts
• Sports Trailer Parts
• Bunk Kit
• Malone

Fully-threaded hex tap bolt is designed to fasten metal components together. Corrosion resistant zinc-plated steel construction is perfect for marine applications.

• Accessories and Parts
• Boat Trailer Parts
• Hardware
• Bolts
• Hex Bolts
• ABS Fasteners

This electric heat strip works with your R32 compatible AC unit (sold separately) to remove the chill from your RV or camper on cold or frosty mornings. Power cord and mounting hardware are included for easy, plug-and-play installation.

• Accessories and Parts
• RV Air Conditioners
• Heat Strip
• Advent Air

Coming soon - available February 2025. You'll need this air distribution box if you're upgrading your RV's AC to a 2025 ductless system with the new R32 refrigerant. The new ACs will not work with any systems from 2024 and earlier.

• Accessories and Parts
• RV Air Conditioners
• Air Distribution Box
• White
• Advent Air

You'll need this air distribution box if you're upgrading your RV's AC to a 2025 ducted or ductless system with the new R32 refrigerant. New ACs will not work with any systems from 2024 or earlier.

• Accessories and Parts
• RV Air Conditioners
• Air Distribution Box
• White
• Advent Air

This SAE to alligator clamps cable connects your 12V battery to your SAE power cable. Works with any 12V accessory that has a SAE connector on its power cord.

• Accessories and Parts
• Tire Inflator
• Adapters
• Clamps
• Air Lift

For heavy-duty applications that require cable, this steel winch cable has a break strength of 5,600 lbs and a working load limit of 1,865 lbs.

• Accessories and Parts
• Electric Winch
• Trailer Winch
• Cables and Straps
• 7/32 Inch Diameter
• 5600 lbs
• Wire Rope
• CURT

For heavy-duty applications, this strap has a break strength of 4,800 lbs and a working load limit of 1,600 lbs.

• Accessories and Parts
• Trailer Winch
• Cables and Straps
• 22-3/8 Inch Wide
• 1600 lbs
• Straps
• CURT

Replacement PVC rounds cover the hooks on your Rack'Em storage rack to provide a protective barrier to reduce wear and vibration on tools.

• Accessories and Parts
• Trailer Cargo Organizers
• Hose Hanger
• Trimmer Racks
• PVC Rounds
• RackEm

Spacer kit for the 23x79 Rack'Em heavy-duty cargo basket for open trailers(RA-14). Adds extra clearance for a better fit, keeping your basket secure and stable on your trailer.

• Accessories and Parts
• Trailer Cargo Organizers
• Storage Basket Parts
• Spacers
• RackEm

Replace RevX3 or upgrade your RevX2 support arms on your Mount-n-Lock GennyGo tray or cargo box (sold separately). Adjustable support arms extend or retract to fit different sized trays or boxes. Mounts around RV bumper and folds up when not in use.

• Accessories and Parts
• Generators
• RV Cargo Carrier
• Support Arms
• Mount-n-Lock

Need to haul that extra-heavy generator to the campsite? We highly appreciate that these brackets and reinforcement plates beef up an RV bumper weight rating by 400 lbs. You'll have peace of mind that your bumper won't detach on the highway.

• Accessories and Parts
• RV Cargo Carrier
• RV Bumpers
• Brackets
• Mount-n-Lock

Rugged, all-steel cargo carrier lets you haul your generator to the campsite and gives close access to an outlet without unloading. Durable, 30" x 30" tray and folding support arms hold up to 300 lbs. 72 Tie-down points help secure cargo.

• RV Cargo Carrier
• Accessories and Parts
• Generator Carrier
• Cargo Carrier
• Bumper Mount
• 300 lbs
• 30 Inch Deep
• Mount-n-Lock

Want to pack a lot more gear than your stock RV bumper can support? We get it. That's why we love that this aluminum bumper increases your weight rating so you can throw extra bikes on the back of your RV and fully enjoy your off-road journey.

• Accessories and Parts
• RV Cargo Carrier
• RV Bumpers
• Bumper Parts
• Mount-n-Lock

Wish you could pack more coolers than your stock RV bumper can support? We've been there. So we love that this aluminum bumper increases your weight rating so you can throw more gear onto the back of your RV for your cross-country adventure.

• Accessories and Parts
• RV Cargo Carrier
• RV Bumpers
• Bumper Parts
• Mount-n-Lock

Increase the cargo capacity of your Mount-n-Lock 1H4HZ ShakeStopper clamping hitch to 400 lbs when weight is evenly distributed. Includes additional main and auxiliary pressure plates, and 2 retention plates. Uses existing hitch hardware.

• Accessories and Parts
• RV and Camper Hitch
• Cargo Capacity Upgrade
• Mount-n-Lock

Expand your exisiting steel GennyGo cargo tray from 24" x 24" to 30" x 30". Steel plates attach to to existing tray parts providing a larger footprint for more gear. Fits RevX3 folding support arms (sold separately).

• Accessories and Parts
• RV Cargo Carrier
• Generators
• Extensions
• Mount-n-Lock

Want to pack a lot more gear than your stock RV bumper can support? We get it. That's why we love that this aluminum bumper increases your weight rating so you can throw extra bikes on the back of your RV and fully enjoy your off-road journey.

• Accessories and Parts
• RV Cargo Carrier
• RV Bumpers
• Bumper Parts
• Mount-n-Lock

Hybrid, aluminum and steel cargo carrier lets you haul your generator to the campsite and gives close access to an outlet without unloading. Lightweight, 24" x 24" tray and folding steel support arms hold up to 300 lbs.

• RV Cargo Carrier
• Accessories and Parts
• Cargo Carrier
• Generator Carrier
• Bumper Mount
• 300 lbs
• 24 Inch Deep
• Mount-n-Lock

Wish you could pack more coolers than your stock RV bumper can support? We've been there. So we love that this aluminum bumper increases your weight rating so you can throw more gear onto the back of your RV for your cross-country adventure.

• Accessories and Parts
• RV Cargo Carrier
• RV Bumpers
• Bumper Parts
• Mount-n-Lock

Love outdoor adventures but struggle with lifting gear onto your crossbars? We recommend the MOS UpLift. Gas-strut-powered arms drop down to just over shoulder level, making it easier than ever to load gear. We even included a lock for security.

• Accessories and Parts
• Roof Box
• Watersport Carriers
• Ski and Snowboard Racks
• Roof Bike Racks
• Roof Rack
• Load Assists
• MOS Racks

Transform your Mad-Ramps setup into a loading system for your snowmobile. As long as your skis are 34" - 42" apart, you can use this kit - along with your Mad-Ramps - to easily and safely get your snowmobile in and out of your truck bed.

• Accessories and Parts
• ATV Ramps
• Truck Ramps
• Snowmobile Kit
• Mad-Ramps