New Arrivals

Tow your trailer with confidence using this PullRite capture plate, designed for Lippert Helux pin boxes. It locks the king pin to ensure smooth tracking with SuperGlide hitches, preventing unwanted rotation and enhancing towing safety.

• Accessories and Parts
• 5th Wheel Pin Box
• Locking Plate
• Lippert Helux
• Pullrite

This adapter attaches to the factory, underbed fifth wheel towing prep package receivers in your vehicle. The base provides the attachment point for your 5th-wheel hitch with industry standard tabbed feet. Modular design allows for easy removal.

• Accessories and Parts
• 5th Wheel Hitch Rails
• Adapters
• Rail Adapter
• Custom
• Pullrite

Replaces the base for your PullRite ISRX Super or SuperLite 5th-wheel hitch for industry-standard rails. Rated for 24,000 lbs gross towing weight.

• Accessories and Parts
• 5th Wheel Hitch
• Base
• Pullrite

Use this plate to keep your trailer's king pin from rotating in your PullRite SuperGlide hitch. A capture plate is required to tow with the SuperGlide. This plate fits cushioned MORryde pin boxes with skid plates that are 13-1/2" wide.

• Accessories and Parts
• 5th Wheel Pin Box
• Locking Plate
• MORryde Pin Box
• Pullrite

Bolt this capture plate onto your Lippert 0719 pin box to prevent the king pin from rotating inside your PullRite fifth-wheel hitch.

• Accessories and Parts
• 5th Wheel Pin Box
• Locking Plate
• Lippert Pin Box
• Pullrite

Install this wedge on your Lippert Turning Point, Sidewinder, or MORryde Orbital 5th wheel pin box to prevent the king pin from rotating in your Pullrite Super 5th wheel hitch.

• Accessories and Parts
• 5th Wheel Pin Box
• Wedges
• Lippert Turning Point
• Pullrite

Take control of every turn with the PullRite SuperGlide Capture Plate! Built for 12-1/2" MOR/ryde pin boxes, it locks in a secure hitch connection, smooth auto sliding & stress-free towing. Durable, easy to install & ready for the long haul.

• Accessories and Parts
• 5th Wheel Pin Box
• Locking Plate
• MORryde Pin Box
• Pullrite

Use this plate to keep your trailer's king pin from rotating in your PullRite SuperGlide hitch. A capture plate is required for you to tow with the SuperGlide. This plate fits Lippert 1621 pin boxes with skid plates that are 12-3/4" wide.

• Accessories and Parts
• 5th Wheel Pin Box
• Locking Plate
• Trailair Pin Box
• Pullrite

Protect the finish on your hitch and truck bed with these lube plates. Designed for the #2600 SuperLite 20K and #3900 Super 5th 24K hitches, these durable nylon plates reduce friction and eliminate the need for messy lubricants.

• Accessories and Parts
• 5th Wheel Hitch
• Plates
• Lube Plate
• Pullrite

Use this plate to keep your trailer's king pin from rotating in your PullRite SuperGlide hitch. A capture plate is required for you to tow with the SuperGlide. This plate fits Flex Air pin boxes with skid plates that are 13-1/4" wide.

• Accessories and Parts
• 5th Wheel Pin Box
• Locking Plate
• Trailair Pin Box
• Pullrite

Mount your Traditional Series PullRite SuperGlide hitch to industry standard base rails or gooseneck mounts using this adapter kit. Works with 4100, 4400, and discontinued 3300 models. Base rails sold separately.

• Accessories and Parts
• 5th Wheel Hitch Rails
• Adapters
• Rail Adapter
• Pullrite

Replace RevX3 or upgrade your RevX2 support arms on your Mount-n-Lock GennyGo tray or cargo box (sold separately). Adjustable support arms extend or retract to fit different sized trays or boxes. Mounts around RV bumper and folds up when not in use.

• Accessories and Parts
• Generators
• RV Cargo Carrier
• Support Arms
• Mount-n-Lock

Need to haul that extra-heavy generator to the campsite? We highly appreciate that these brackets and reinforcement plates beef up an RV bumper weight rating by 400 lbs. You'll have peace of mind that your bumper won't detach on the highway.

• Accessories and Parts
• RV Cargo Carrier
• RV Bumpers
• Brackets
• Mount-n-Lock

Rugged, all-steel cargo carrier lets you haul your generator to the campsite and gives close access to an outlet without unloading. Durable, 30" x 30" tray and folding support arms hold up to 300 lbs. 72 Tie-down points help secure cargo.

• RV Cargo Carrier
• Accessories and Parts
• Generator Carrier
• Cargo Carrier
• Bumper Mount
• 300 lbs
• 30 Inch Deep
• Mount-n-Lock

Want to pack a lot more gear than your stock RV bumper can support? We get it. That's why we love that this aluminum bumper increases your weight rating so you can throw extra bikes on the back of your RV and fully enjoy your off-road journey.

• Accessories and Parts
• RV Cargo Carrier
• RV Bumpers
• Bumper Parts
• Mount-n-Lock

Wish you could pack more coolers than your stock RV bumper can support? We've been there. So we love that this aluminum bumper increases your weight rating so you can throw more gear onto the back of your RV for your cross-country adventure.

• Accessories and Parts
• RV Cargo Carrier
• RV Bumpers
• Bumper Parts
• Mount-n-Lock

Increase the cargo capacity of your Mount-n-Lock 1H4HZ ShakeStopper clamping hitch to 400 lbs when weight is evenly distributed. Includes additional main and auxiliary pressure plates, and 2 retention plates. Uses existing hitch hardware.

• Accessories and Parts
• RV and Camper Hitch
• Cargo Capacity Upgrade
• Mount-n-Lock

Expand your exisiting steel GennyGo cargo tray from 24" x 24" to 30" x 30". Steel plates attach to to existing tray parts providing a larger footprint for more gear. Fits RevX3 folding support arms (sold separately).

• Accessories and Parts
• RV Cargo Carrier
• Generators
• Extensions
• Mount-n-Lock

Want to pack a lot more gear than your stock RV bumper can support? We get it. That's why we love that this aluminum bumper increases your weight rating so you can throw extra bikes on the back of your RV and fully enjoy your off-road journey.

• Accessories and Parts
• RV Cargo Carrier
• RV Bumpers
• Bumper Parts
• Mount-n-Lock

Hybrid, aluminum and steel cargo carrier lets you haul your generator to the campsite and gives close access to an outlet without unloading. Lightweight, 24" x 24" tray and folding steel support arms hold up to 300 lbs.

• RV Cargo Carrier
• Accessories and Parts
• Cargo Carrier
• Generator Carrier
• Bumper Mount
• 300 lbs
• 24 Inch Deep
• Mount-n-Lock

Wish you could pack more coolers than your stock RV bumper can support? We've been there. So we love that this aluminum bumper increases your weight rating so you can throw more gear onto the back of your RV for your cross-country adventure.

• Accessories and Parts
• RV Cargo Carrier
• RV Bumpers
• Bumper Parts
• Mount-n-Lock

Love outdoor adventures but struggle with lifting gear onto your crossbars? We recommend the MOS UpLift. Gas-strut-powered arms drop down to just over shoulder level, making it easier than ever to load gear. We even included a lock for security.

• Accessories and Parts
• Roof Box
• Watersport Carriers
• Ski and Snowboard Racks
• Roof Bike Racks
• Roof Rack
• Load Assists
• MOS Racks

Transform your Mad-Ramps setup into a loading system for your snowmobile. As long as your skis are 34" - 42" apart, you can use this kit - along with your Mad-Ramps - to easily and safely get your snowmobile in and out of your truck bed.

• Accessories and Parts
• ATV Ramps
• Truck Ramps
• Snowmobile Kit
• Mad-Ramps

Designed for motorhomes, this telescoping rail replaces the small grab handle by your door. The 3' rail gives you extra stability on your steps. Folds flat against the wall with a sleek, low-profile look that won't obstruct the door.

• Accessories and Parts
• RV Steps
• Grab Handles and Handrails
• Telescoping Handrail
• MORryde