New Arrivals

You're walking around your rig and notice the trim ends suddenly on the left side. No cap, just an exposed edge catching dirt and water. This replacement seals it up and finishes the run so it actually looks like it came that way.

• RV Slide Out Parts
• Caps and Covers
• End Cap
• Bolt-On
• Black
• B and B Molders

Mount it outside your RV or in your wet bay and hit the ground running - this panel keeps all your water and cable hookups in one spot with capped ports to keep things clean. Less fiddling, more chilling.

• RV Water Inlets
• City Fill Inlet
• Flush Mount
• Plastic
• Black
• B and B Molders

You're replacing a sun-faded, road-battered, barely sealed access hatch that's been holding on by a thread since your last trip. You pull it off, line up the new one, and it fits. Like it was made for your rig from the start. Because it was.

• RV Access Doors
• Multi-Purpose Hatch
• Rectangle
• Locking
• 6-1/4W x 5T Inch
• 5-1/2W x 4-1/8T Inch Cutout
• Gray
• B and B Molders

You're checking the base of the slide-out after a long weekend and notice the right-hand trim cap is gone. The open end is collecting dirt and giving water a way in. This replacement screws into place to cover the opening and matches your trim.

• RV Trim
• Plastic Molding
• Black
• B and B Molders

You're up on the ladder checking your slide-out and notice the corner is exposed. The square cover is gone, and now water's got a direct shot into the seam. This replacement squares it off, seals the joint, and blends right in with the trim.

• RV Slide Out Parts
• Caps and Covers
• Square Corner
• Bolt-On
• Black
• B and B Molders

The rain starts to fall, and you don't even flinch. Thats how it should be. This little splice makes sure the flow keeps going. No drips from the seams or streaks down the side. Just water headed where it's supposed to go.

• RV Trim
• Gutter Parts
• Black
• B and B Molders

You're walking around your rig and spot the end of the trim line sticking out. The cap is missing, leaving the edge exposed to water and road spray. This return-style end cap with a molded step finishes off the run and blends in with your trim.

• RV Slide Out Parts
• Caps and Covers
• End Cap
• Bolt-On
• Gray
• B and B Molders

It's not the flashiest part of your rig, but it's necessary. This vent cover keeps air moving and water out, so the inside stays fresh, no matter what's happening outside. You'll forget it's there. That's exactly the point.

• RV Vents and Fans
• Vent Cover
• Plumbing Vent
• Plastic
• Black
• B and B Molders

You're checking the inside corner of the slide-out and spot the trim joint exposed. The cover's missing, and now there's a gap catching dust and grime. This replacement covers it up and blends right in with the trim.

• RV Slide Out Parts
• Caps and Covers
• Inside Corner
• Bolt-On
• White
• B and B Molders

You're up on the ladder checking your slide-out and notice the corner is exposed. The square cover is gone, and now water's got a direct shot into the seam. This replacement squares it off, seals the joint, and blends right in with the trim.

• RV Slide Out Parts
• Caps and Covers
• Square Corner
• Bolt-On
• Beige
• B and B Molders

You can't stop the rain, but you can control where it goes. These gutter spouts guide water away from your rig so it doesn't leave streaks down the side or puddles by the door. A small fix that makes a clear difference when the weather turns.

• RV Trim
• Gutter Parts
• White
• B and B Molders

Bring cold drinks to the campsite, worksite, or on the boat with Bulldog Winch's watertight, soft cooler. It has attachments points all around the cooler, so that you can secure it to your boat or off-road vehicle. Holds 15, 12-oz cans.

• Coolers
• Can Cooler
• Soft Cooler
• 1 - 20 Quarts
• Bottle Opener
• Shoulder Strap
• Gray
• Bulldog Winch

Designed for soft shackles, this recovery hitch provides a sturdy anchor point in your synthetic rigging setup. The chamfered hole prevents damage to your soft shackle due to friction. Hitch pin and clip sold separately.

• Tow Shackles
• Shackle with Shank
• Hitch Mount
• 10000 lbs WLL
• Chrome
• Bulldog Winch

Bring cold drinks on a hike, to the campsite, worksite, or on the boat with Bulldog Winch's watertight backpack cooler. It can hold 30, 12-oz cans and can be easily carried on your shoulders, wherever your journey takes you.

• Coolers
• Backpack Cooler
• Soft Cooler
• 21 - 40 Quarts
• Shoulder Strap
• Bottle Opener
• Gray
• Bulldog Winch

Airing up or down is easy with this kit - inflate or deflate all 4 tires at once, power it anywhere, and get accurate pressure readings fast. Built for off-roaders who want quick setup, even tire pressure, and less time fiddling with gear.

• Tire Inflator
• Tire Inflator
• Portable
• 150 psi
• 12V
• Digital Pressure Gauge
• Off Road Vehicles
• RVs
• Manual Shut Off
• Bulldog Winch

Bring cold drinks to the campsite, worksite, or on the boat with Bulldog Winch's watertight cooler. It has attachments points all around the cooler, so that you can secure it to your boat or off-road vehicle. Holds 30, 12-oz cans.

• Coolers
• Can Cooler
• Soft Cooler
• 21 - 40 Quarts
• Shoulder Strap
• Bottle Opener
• Gray
• Bulldog Winch

Keep your slings from getting worn down when connecting and disconnecting your load with this shackle with screw pin. Bright red color makes it easy to locate.

• Tow Shackles
• Shackle Only
• Screw On
• 9500 lbs WLL
• 3/4 Inch Pin Diameter
• Red
• Bulldog Winch

Portable compressor mounts on your Jeep, truck, or RV so you can pressurize air and quickly fill your tank without having to come in off the beaten path. Perfect for inflating tires 40" and larger.

• Tire Inflator
• Tire Inflator
• Portable
• 200 psi
• Digital Pressure Gauge
• RVs
• Off Road Vehicles
• Bulldog Winch

Blowing out your RV water lines for winter can be messy or risky if pressure gets too high. This kit connects to your air line and regulates pressure to protect your plumbing. A built-in gauge lets you keep an eye on it while you clear the system.

• RV Fresh Water
• Winterization
• Pump Kits
• Bulldog Winch

Drop leg, compact jack with heavy-duty footplate base welds directly onto your application and offers superior side-load strength in a tight-fitting package. Includes sidewind crank and has 19-15/16" retracted height.

• Trailer Jack
• 5th Wheel Trailer
• Enclosed Trailer
• Gooseneck Trailer
• Dump Trailer
• Side-Mount Jacks
• Standard Grade
• 9001 - 10000 lbs
• Manual Jack
• Weld-On
• With Rectangle Foot
• Bulldog

We're really impressed with how many features have been packed into a simple door latch. Beyond the keyless access, the app has power-saving modes, locking history, and battery level. This one upgrades your left-handed trailer entry door.

• RV Door Locks
• RV Door Parts
• Entry Door
• Latches
• Keyed Unique
• Keyless Entry Latch
• Black
• Bauer Products

We're really impressed with how many features have been packed into a simple door latch. Beyond the keyless access, the app has power-saving modes, locking history, and battery level. This one upgrades your left-handed motorhome entry door.

• RV Door Parts
• RV Door Locks
• Entry Door
• Latches
• Keyed Unique
• Keyless Entry Latch
• Black
• Bauer Products

We're really impressed with how many features have been packed into a simple door latch. Beyond the keyless access, the app has power-saving modes, locking history, and battery level. This one upgrades your right-handed trailer entry door.

• RV Door Locks
• RV Door Parts
• Entry Door
• Latches
• Keyed Unique
• Keyless Entry Latch
• Black
• Bauer Products

Replaces the universal striker plate for you Bauer RV door lock without pins. Works with BP-12 locks without pins. If your lock is for a compartment where passengers would be riding, the BA88HR striker plate is the correct plate.

• RV Door Parts
• Entry Door
• Latches
• Strike Plate
• Bauer Products