With 30,000 Btu of heat, we recommend this built-in furnace for RVs about 30' long. It will get your RV nice and toasty far quicker than a space heater, and it includes a door so the unit can be serviced from the outside.
Made for full-season use, this RV furnace runs without shore power and delivers quiet, efficient heat wherever you travel. Soft Start tech eases power draw, and the airflow design helps warm your rig fast, taking the edge off those cold mornings.
After a long drive, the last thing you want is to crank your trailer jack by hand. This electric jack does the heavy lifting with a push of the switch, and the foot plate helps keep you steady on soft soil or gravel so you can settle in and relax.
These compact, user-friendly scissor jacks are a must-have to keep your RV level and stable. They adjust from 5" to 29". Bow-tie bases steady the jacks on soft surfaces. Manual crank handle and drill bit included for flexible operation.
With a locking tool box mounted to your trailer, you can keep your straps, jack, tools, and other gear organized. The gas strut holds the lid open leaving your hands free to grab what you need, and the powder coated aluminum finish resists corrosion.
Get your boat loaded and unloaded onto your trailer with this manual ratcheting winch. Zinc finish resists rust, making it ideal for marine use. Strap not included.
Hook up fast and tow with confidence. This 25K gooseneck coupler self-latches for easy hookup, while the ball clamp ensures a tight fit. The 8" adjustment keeps your trailer level for a smooth, secure tow.
Heavy-duty 25K capacity, 2-speed jack is perfect for any demanding job that requires a gooseneck trailer. Retracted height is 8-1/4" and extended height is 18", plus 8" of drop leg travel using the plunger pin.
After a long drive, the last thing you want is to crank your trailer jack by hand. With this electric jack you just plug the 7-way into your tow vehicle, hit the switch, and let the motor take care of the heavy lifting. No sweat required.
These compact, user-friendly scissor jacks are a must-have to keep your RV level and stable. They adjust from 5" to 29". Bow-tie bases steady the jacks on soft surfaces. Manual crank handle and drill bit included for flexible operation.
This A-frame jack has a retracted height of 7-1/8" and an extended height of 22-3/8". The drop leg offers 13-1/2" of lift on top of 15-1/4" of screw travel. Includes a sidewind handle and footplate.
Get your boat loaded and unloaded onto your trailer with this manual ratcheting winch. Zinc finish resists rust, making it ideal for marine use. Strap included.
After a long drive, the last thing you want is to crank your trailer jack by hand. This electric jack does the heavy lifting with a push of the switch, and the drop leg and foot plate help you get level fast so you can settle in and relax.
If you've ever lost a weekend to trailer trouble, you know how important bearing protection is. The Vault system has a fully sealed, pressurized chamber that keeps out water and grit, and hybrid oil self-lubricates where it's needed.
12-1/4" x 2-1/2" Electric trailer brake assemblies fits Dexter Tow Assist 7,500-lb axles. Mounting flanges have a 4-bolt pattern. Nev-R-Adjust brakes require little maintenance. Fits 15" or larger wheels.
Convenient kit contains everything you need to replace the bearings and seal on a single trailer hub: inner bearing (L68149) and outer bearing (L44649), inner race (L68111) and outer race (L44610), grease seal, a cotter pin, and a dust cap.
A worn or damaged hub can put your trailer and your trip at risk. This ABS-ready replacement is built for Dexters Tow Assist, so you can get back on the road with the reliable braking and steady control you count on.
A worn or damaged hub can put your trailer and your trip at risk. This ABS-ready replacement is built for Dexters Tow Assist, so you can get back on the road with the reliable braking and steady control you count on.
Replace worn DB-35 brakes with this complete Dexter disc brake kit for 3.5K axles. Includes 10" zinc rotors, bearings, seals, grease caps, and hardware for 1-3/8" straight spindles typically found on Ranger boats.
Protect your trailers wheel bearings with these 2.72" OD grease caps. Zinc-plated steel resists corrosion, and the drive-in design installs easily. Designed for 12" x 2" Dexter 8-bolt hubs. Includes 2 caps.
Replacement U-Bolt plate helps to secure one end of your 2-3/8" diameter trailer axle to a 2" wide leaf spring. Designed for use with 3,500-lb, heavy-duty Dexter axles. 3/16" Thick steel plate ensures strength.