New Arrivals

Insert this heavy-duty mount into your 2-1/2" hitch to get 5 stacked 2-1/2" receivers for mounting the included 2" ball, 2-5/16" ball, pintle hook, or other hitch-mounted accessory. Tongue weight is 3,000 lbs.

• Drop Hitch
• Trailer Hitch Ball Mount
• Adjustable Ball Mount
• Two Balls
• 2 Inch Ball
• 2-5/16 Inch Ball
• Steel Shank - Gray
• Drop - 9 Inch
• Rise - 9 Inch
• 21000 lbs GTW
• Stacked Receivers
• Built-In Pintle Hook
• Gen-Y Hitch

Bolt or weld this heavy-duty mount onto your vehicle to get 4 stacked 2-1/2" receivers for mounting the included 2" ball, 2-5/16" ball, pintle hook, or other hitch-mounted accessory. Bolt holes match most standard pintle plates.

• Drop Hitch
• Trailer Hitch Ball Mount
• Adjustable Ball Mount
• Two Balls
• 2 Inch Ball
• 2-5/16 Inch Ball
• Steel Shank - Gray
• Drop - 9 Inch
• Rise - 9 Inch
• 32000 lbs GTW
• Stacked Receivers
• Built-In Pintle Hook
• Gen-Y Hitch

2-1/2" x 2-1/2" Receiver tube is designed for fabricating a custom hitch when a receiver isn't available. Weld-on installation. Tube is 12" long. Raw steel construction is durable.

• Hitch Fabrication Parts
• Receiver Tube
• 12 Inch Long
• Raw Finish
• Fits 2-1/2 Inch Hitch
• Gen-Y Hitch

Insert this shock-absorbing, adjustable mount into your hitch to get 4 stacked 2" receivers. Flexing rubber cords limit shock. 2" Ball, 2-5/16" ball, and pintle hook included.

• Drop Hitch
• Trailer Hitch Ball Mount
• Adjustable Ball Mount
• Two Balls
• 2 Inch Ball
• 2-5/16 Inch Ball
• Steel Shank - Gray
• Drop - 5 Inch
• 10000 lbs GTW
• Stacked Receivers
• Shock Absorbing
• Built-In Pintle Hook
• Gen-Y Hitch

Insert this heavy-duty mount into your 2-1/2" hitch to get 4 stacked 2-1/2" receivers for mounting the included 2" ball, 2-5/16" ball, pintle hook, or other hitch-mounted accessory. Tongue weight is 3,500 lbs.

• Drop Hitch
• Trailer Hitch Ball Mount
• Adjustable Ball Mount
• Two Balls
• 2-5/16 Inch Ball
• 2 Inch Ball
• Steel Shank - Gray
• Rise - 3 Inch
• Drop - 6 Inch
• 32000 lbs GTW
• Built-In Pintle Hook
• Stacked Receivers
• Gen-Y Hitch

Bolt or weld this heavy-duty mount onto your vehicle to get 3 stacked 2-1/2" receivers for mounting the included 2" ball, 2-5/16" ball, pintle hook, or other hitch-mounted accessory. Bolt holes match most standard pintle plates.

• Drop Hitch
• Trailer Hitch Ball Mount
• Adjustable Ball Mount
• Two Balls
• 2 Inch Ball
• 2-5/16 Inch Ball
• Steel Shank - Gray
• Drop - 6 Inch
• Rise - 6 Inch
• 21000 lbs GTW
• Built-In Pintle Hook
• Stacked Receivers
• Gen-Y Hitch

A-frame coupler is designed to bolt directly onto your trailer. SnapLatch ensures fast, easy, secure hookup and disconnect. Powder coated steel is sturdy and corrosion resistant. Mounting bolts not included.

• A-Frame Trailer Coupler
• Standard Coupler
• Weld-On
• Bolt-On
• 21000 lbs GTW
• 2-5/16 Inch Ball Coupler
• Gen-Y Hitch

Insert this heavy-duty mount into your 2" hitch to get 6 stacked 2" receivers for mounting the included 2" ball, 2-5/16" ball, pintle hook, or other hitch-mounted accessory. Tongue weight is 1,500 lbs.

• Drop Hitch
• Trailer Hitch Ball Mount
• Adjustable Ball Mount
• Two Balls
• 2 Inch Ball
• 2-5/16 Inch Ball
• Steel Shank - Gray
• Rise - 7 Inch
• Drop - 7 Inch
• 10000 lbs GTW
• Stacked Receivers
• Built-In Pintle Hook
• Gen-Y Hitch

3" x 3" Receiver tube is designed for fabricating a custom hitch when a receiver isn't available. Weld-on installation. Tube is 12" long. Raw steel construction is durable.

• Hitch Fabrication Parts
• Receiver Tube
• 12 Inch Long
• Raw Finish
• Fits 3 Inch Hitch
• Gen-Y Hitch

Insert this shock-absorbing, adjustable mount into your hitch to get 5 stacked 2" receivers. Flexing rubber cords limit shock. 2" Ball, 2-5/16" ball, and pintle hook included.

• Drop Hitch
• Trailer Hitch Ball Mount
• Adjustable Ball Mount
• Two Balls
• 2 Inch Ball
• 2-5/16 Inch Ball
• Steel Shank - Gray
• Drop - 7 Inch
• 10000 lbs GTW
• Stacked Receivers
• Shock Absorbing
• Built-In Pintle Hook
• Gen-Y Hitch

Insert this heavy-duty mount into your 2-1/2" hitch to get 6 stacked 2-1/2" receivers for mounting the included 2" ball, 2-5/16" ball, pintle hook, or other hitch-mounted accessory. Tongue weight is 3,500 lbs.

• Trailer Hitch Ball Mount
• Drop Hitch
• Adjustable Ball Mount
• Two Balls
• 2-5/16 Inch Ball
• 2 Inch Ball
• Steel Shank - Gray
• Drop - 12 Inch
• Rise - 3 Inch
• 32000 lbs GTW
• Stacked Receivers
• Built-In Pintle Hook
• Gen-Y Hitch

Get easy access to your truck bed, roof rack, or cargo area with this hitch-mounted step. Slides into your 2" hitch receiver. Serrated surface helps keep you from slipping off the step.

• Truck Bed Step
• Hitch Step
• Fixed Step
• Standard Step
• 2 Inch Deep
• 500 lbs
• 12 Inch Wide
• Steel
• Gen-Y Hitch

This shock-absorbing pin box provides a smooth, safe ride while you tow your fifth-wheel trailer. The all-in-1 box has no air bags to refill or small parts to replace. The weight scale lets you monitor your vertical load. 6.5K pin weight.

• 5th Wheel Pin Box
• Upgraded Pin Box
• Absorbs Road Shock and Reduces Chucking
• 30000 lbs GTW
• Lippert Rhino
• Gen-Y Hitch

This reducer sleeve lets you use 2-1/2" towing and hitch-mounted accessories with your 3" receiver. Adapter easily slides into your hitch receiver or onto the shank of your accessory. Powder coated steel resists corrosion.

• Hitch Adapters
• Hitch Reducer
• Bike Racks
• Cargo Carriers
• Hitch Mounted Accessories
• No Extension
• Fits 3 Inch Hitch
• 3 Inch to 2-1/2 Inch
• Gen-Y Hitch

Single, heavy-duty aluminum ramp lets you load your gear into your truck or trailer. Wide cross rungs provide maximum traction. Folds at the center for easy storage and portability. Offers a weight capacity of 3,000 lbs.

• ATV Ramps
• Trailer Ramps
• Truck Ramps
• ATV Ramps
• Load Assist
• Open Trailer
• 3000 lbs
• Center-Fold
• 96 Inch Long
• Aluminum
• Gen-Y Hitch

Bolt or weld this heavy-duty mount onto your vehicle to get 2 stacked 2" receivers for mounting the included 2" ball, 2-5/16" ball, pintle hook, or other hitch-mounted accessory. Bolt hole pattern matches most standard pintle plates.

• Trailer Hitch Ball Mount
• Drop Hitch
• Adjustable Ball Mount
• Two Balls
• 2 Inch Ball
• 2-5/16 Inch Ball
• Steel Shank - Gray
• Drop - 2 Inch
• 16000 lbs GTW
• Built-In Pintle Hook
• Stacked Receivers
• Gen-Y Hitch

Insert this camo-covered heavy-duty mount into your 2" hitch to get 3 stacked 2" receivers for mounting the included 2" ball, 2-5/16" ball, pintle hook, or other hitch-mounted accessory. Tongue weight is 1,500 lbs.

• Trailer Hitch Ball Mount
• Drop Hitch
• Adjustable Ball Mount
• Two Balls
• 2 Inch Ball
• 2-5/16 Inch Ball
• Steel Shank - Matte Black
• Rise - 5 Inch
• Drop - 5 Inch
• 10000 lbs GTW
• Built-In Pintle Hook
• Stacked Receivers
• Gen-Y Hitch

Insert this heavy-duty mount into your 2" hitch to get 7 stacked 2" receivers for mounting the included 2" ball, 2-5/16" ball, pintle hook, or other hitch-mounted accessory. Stabilizer kit ensures load is well distributed.

• Trailer Hitch Ball Mount
• Drop Hitch
• Adjustable Ball Mount
• Two Balls
• 2-5/16 Inch Ball
• 2 Inch Ball
• Steel Shank - Gray
• Drop - 15 Inch
• 16000 lbs GTW
• Built-In Pintle Hook
• Stacked Receivers
• Gen-Y Hitch

• Trailer Hitch Ball Mount
• Fixed Ball Mount
• No Ball
• Steel Shank - Matte Black
• 7000 lbs GTW
• Shock Absorbing
• Gen-Y Hitch

Insert this shock-absorbing, adjustable mount into your hitch to get 5 stacked 2-1/2" receivers. Flexing rubber cords limit shock. 2" Ball, 2-5/16" ball, and pintle hook included.

• Drop Hitch
• Trailer Hitch Ball Mount
• Adjustable Ball Mount
• Two Balls
• 2-5/16 Inch Ball
• 2 Inch Ball
• Steel Shank - Gray
• Drop - 9 Inch
• 32000 lbs GTW
• Shock Absorbing
• Stacked Receivers
• Built-In Pintle Hook
• Gen-Y Hitch

Insert this camo-covered heavy-duty mount into your 2" hitch to get 4 stacked 2" receivers for mounting the included 2" ball, 2-5/16" ball, pintle hook, or other hitch-mounted accessory.

• Trailer Hitch Ball Mount
• Drop Hitch
• Adjustable Ball Mount
• Two Balls
• 2 Inch Ball
• 2-5/16 Inch Ball
• Steel Shank - Camo
• Rise - 2 Inch
• Drop - 5 Inch
• 12000 lbs GTW
• 16000 lbs GTW
• Stacked Receivers
• Gen-Y Hitch

Insert this shock-absorbing, adjustable mount into your hitch to get 6 stacked 2" receivers. Flexing rubber cords limit shock. 2" Ball, 2-5/16" ball, and pintle hook included.

• Drop Hitch
• Trailer Hitch Ball Mount
• Adjustable Ball Mount
• Two Balls
• 2 Inch Ball
• 2-5/16 Inch Ball
• Steel Shank - Gray
• Drop - 10 Inch
• Rise - 2 Inch
• 10000 lbs GTW
• Shock Absorbing
• Built-In Pintle Hook
• Stacked Receivers
• Gen-Y Hitch

Insert this camo-covered heavy-duty mount into your 2" hitch to get 3 stacked 2" receivers for mounting the included 2" ball, 2-5/16" ball, or other hitch-mounted accessory.

• Drop Hitch
• Trailer Hitch Ball Mount
• Adjustable Ball Mount
• Two Balls
• 2 Inch Ball
• 2-5/16 Inch Ball
• Steel Shank - Camo
• Rise - 5 Inch
• Drop - 5 Inch
• 16000 lbs GTW
• 12000 lbs GTW
• Stacked Receivers
• Gen-Y Hitch

Insert this heavy-duty mount into your 2" hitch to get 8 stacked 2" receivers for mounting the included 2" ball, 2-5/16" ball, pintle hook, or other hitch-mounted accessory. Stabilizer kit ensures load is well distributed.

• Trailer Hitch Ball Mount
• Drop Hitch
• Adjustable Ball Mount
• Two Balls
• 2 Inch Ball
• 2-5/16 Inch Ball
• Steel Shank - Gray
• Drop - 17 Inch
• 16000 lbs GTW
• Built-In Pintle Hook
• Stacked Receivers
• Gen-Y Hitch