New Arrivals
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
In Stock
Hit the road with confidence! Whether towing a camper, hauling gear, or getting the job done, this hitch is built for adventure. A fourth layer of matte black powder coating resists corrosion, ensuring strength and durability for every journey.
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 750 lbs TW
- 7500 lbs GTW
- 8000 lbs WD GTW
- 800 lbs WD TW
- Concealed Cross Tube
- etrailer
etrailer Anti-Rattle Hitch Collar for 2" Hitch Receivers
In Stock
We've been there - the rattles, the clanks, the frustrating swaps - so we built a smarter solution. This anti-rattle collar installs fast, stays secure, and works with all your hitch-mounted gear, so you can focus on the road ahead.
- Hitch Anti-Rattle
- Standard Anti-Rattle
- Universal
- Steel
- Fits 2 Inch Hitch
- Towing Anti-Rattle
- Accessory Anti-Rattle
- etrailer
Trailer Axle Beam with Easy Grease Spindles - 89" Long - 3,500 lbs
In Stock
Round trailer axle beam measures 89" from hub-face-to-hub-face (when hubs - sold separately - are mounted) and 74" from spring-center-to-spring-center. Easy Grease spindles make it easy to lubricate bearings (sold separately).
- Trailer Suspension Parts
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- No Hubs
- 3500 lbs
- Spindles Only
- 89 Inch Hub Face
- No Drop or Lift
- etrailer
etrailer Hard Tonneau Cover - Folding - Fiberglass Reinforced Plastic
In Stock
When we decided to offer an etrailer hard, folding tonneau cover, we knew we wanted an affordable cover that would look great on your vehicle. It may not have all the flashy extras, but it's a quality cover that provides a lot of value.
- Tonneau Cover
- Fold-Up - Hard
- Not Rack Compatible
- Opens at Tailgate
- Tailgate Lock
- Hard Plastic and Fiberglass
- Matte
- etrailer
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
In Stock
Hit the road with confidence! Whether towing a camper, hauling gear, or getting the job done, this hitch is built for adventure. A fourth layer of matte black powder coating resists corrosion, ensuring strength and durability for every journey.
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 750 lbs TW
- 7500 lbs GTW
- 7500 lbs WD GTW
- 750 lbs WD TW
- Concealed Cross Tube
- etrailer
Trailer Hub and Drum Assembly for Dexter ABS Tow Assist - 7K Axle - 8 on 6-1/2 - Oil Bath - Qty 1
Shuddering brakes, trailer sway, or grinding under load? Worn drums and bearings put safety at risk. An ABS-ready hub built for Dexter's Tow Assist restores smooth braking, steady tracking, and the peace of mind to tow without second-guessing.
- Trailer Hubs and Drums
- Hub with Drum
- Oil Bath
- ABS
- 25580 / 14125A
- Standard Grade
- For 7000 lbs Axles
- 8 on 6-1/2 Inch
- 16-1/2 Inch Wheel
- 17-1/2 Inch Wheel
- 16 Inch Wheel
- 17 Inch Wheel
- Dexter
Dexter Disc Brake Kit - 10" Zinc Rotor - 5 on 4-1/2 - 3.5K Ranger - Fits 1-3/8" Spindle
Replace worn DB-35 brakes with this complete Dexter disc brake kit for 3.5K axles. Includes 10" zinc rotors, bearings, seals, grease caps, and hardware for 1-3/8" straight spindles typically found on Ranger boats.
- Trailer Brakes
- Disc Brakes
- Marine Grade
- 5 on 4-1/2 Inch
- Rotor
- 3500 lbs Axle
- 15 Inch Wheel
- 14-1/2 Inch Wheel
- 14 Inch Wheel
- 13 Inch Wheel
- Dexter
Dexter Bearing Kit for 7.2K - 8K Axles - Inner and Outer Bearings 02475/25580
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- 2.25 Inch I.D.
- Bearing 02675 and 25580
- Race 25520 and 02420
- 8000 lbs Axle
- 7200 lbs Axle
- Dexter
Dexter Grease Cap with 2.72" OD - Fits 12" x 2" 8-Bolt Hubs - Zinc-Plated - Qty 2
In Stock
Protect your trailers wheel bearings with these 2.72" OD grease caps. Zinc-plated steel resists corrosion, and the drive-in design installs easily. Designed for 12" x 2" Dexter 8-bolt hubs. Includes 2 caps.
- Trailer Bearings Races Seals Caps
- Caps
- Standard Grease Cap
- 2.72 Inch O.D.
- 6000 lbs Axle
- 5200 lbs Axle
- 7000 lbs Axle
- Dexter
Dexter Dual Hydraulic Jack System w/ Double Acting Pump - 12,000 lbs
Smooth and powerful hydraulic jack kit includes everything you need to lift your heavy load with a press of a button. The selector valve safely controls movement while the pivoting foot pad stabilizes the jack on rough terrain.
- Trailer Jack
- 5th Wheel Trailer
- Gooseneck Trailer
- Dump Trailer
- Enclosed Trailer
- Side-Mount Jacks
- 10001 lbs or More
- Hydraulic Jack
- Weld-On
- With Rectangle Foot
- Dexter
Dexter U-Bolt Plate for 2-3/8" Round Axle - 2" Wide Springs - 9/16" Bolts
Replacement U-Bolt plate helps to secure one end of your 2-3/8" diameter trailer axle to a 2" wide leaf spring. Designed for use with 3,500-lb, heavy-duty Dexter axles. 3/16" Thick steel plate ensures strength.
- Trailer Suspension Parts
- U-Bolt Plates
- Snowmobile Trailer
- Boat Trailer
- 3500 lbs
- Round Axle - 2-3/8 Inch
- Dexter
Replacement Cap for Dexter 12V KTI Hydraulic Pump Reservoirs - Qty 1
Replaces the cap for your Dexter 12V KTI hydraulic pump reservoir. Fits DC-4419 and DC45520.
- Dexter Axle
Trailer Hub and Drum Assembly for Dexter ABS Tow Assist - 7K Axle - 8 on 6-1/2 - Oil Bath - Qty 1
Shuddering brakes, trailer sway, or grinding under load? Worn drums and bearings put safety at risk. An ABS-ready hub built for Dexter's Tow Assist restores smooth braking, steady tracking, and the peace of mind to tow without second-guessing.
- Trailer Hubs and Drums
- Hub with Drum
- ABS
- Oil Bath
- 25580 / 14125A
- Standard Grade
- For 7000 lbs Axles
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 17 Inch Wheel
- 16-1/2 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
Dexter Hydraulic Drum Brake Kit - Duo Servo - 12-1/4" - Left/Right - 10K - Dual Servo
In Stock
Get smooth, reliable braking with this Dexter hydraulic drum brake kit. Designed for 9K-10K axles, these self-adjusting brakes reduce maintenance while delivering strong stopping power. Assemblies include parking brake levers for extra control.
- Trailer Brakes
- Hydraulic Drum Brakes
- Standard Grade
- Dual Servo
- Self Adjust
- 12-1/4 x 3-3/8 Inch Drum
- 9000 lbs Axle
- 10000 lbs Axle
- 16 Inch Wheel
- 15 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
Trailer Idler Hub Assembly for 4,200-lb Axles - 5 on 4-1/2 - Galvanized
Marine-grade hub is designed for use on trailer idler axles. Fits 4,2500-lb axles. Requires inner bearing (L68149) and race, outer bearing (L68149) and race, grease seal, grease cap, and lug nuts (not included). Galvanized finish is rust resistant.
- Dexter
Dexter Bearing Kit for 1" BT8 Spindle
In Stock
- Trailer Bearings Races Seals Caps
- Bearings
- Bearing Kits
- Standard Bearings
- 1.23 Inch I.D.
- Bearing L44643
- Race L44610
- 2000 lbs Axle
- Dexter
Dexter Channel-Mount Coupler w/ Low-Profile Latch - 2" Ball - 7.7K
In Stock
Already have a Dexter adjustable-channel actuator? Change or replace your coupler with this low-profile latch. It features an over-center latch mechanism that only engages when the coupler is fully seated on your hitch ball.
- Adjustable Trailer Coupler
- Coupler Only
- 3 Inch Channel
- 7700 lbs GTW
- 2 Inch Ball Coupler
- Zinc Finish
- Dexter
Dexter 16.5K In-Line Disc Brake Actuator w/ 2-5/16" Coupler - Bolt-On
When you're towing serious weight, you need more than hope and a prayer. This actuator delivers real braking power and the control to match. Your trailer stays steady, and your hands can steer clear of the white-knuckle death grip.
- Brake Actuator
- Electric-Hydraulic Brake Actuator
- Farm Trailer
- Boat Trailer
- Construction Trailer
- Utility Trailer
- Travel Trailer
- Bolt-On
- 16500 lbs GTW
- 2-5/16 Inch Ball Coupler
- Disc Brakes
- Dexter
Trailer Hub and Drum Assembly for Dexter ABS Tow Assist - 8K - 8 on 6-1/2 - E-Z Lube - Qty 1
Shuddering brakes, trailer sway, or grinding under load? Worn drums and bearings put safety at risk. An ABS-ready hub built for Dexter's Tow Assist restores smooth braking, steady tracking, and the peace of mind to tow without second-guessing.
- Trailer Hubs and Drums
- Hub with Drum
- EZ Lube
- ABS
- 25580 / 02475
- Standard Grade
- For 8000 lbs Axles
- 8 on 6-1/2 Inch
- 17-1/2 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- Dexter
Dexter Double-Eye Leaf Spring - 26" Long - 1,875 lb Capacity
This double-eye leaf spring delivers up to 1,875 lb of support per spring to help keep your trailer level and stable, whether youre upgrading or replacing a worn component.
- Trailer Suspension Parts
- Trailer Leaf Springs
- Double Eye Springs
- 1875 lbs
- 1-3/4 Inch Wide
- 26 Inch Long
- Standard Grade
- Dexter
EZ Lube Grease Caps with 2.72" OD - Fits 12" x 2" Dexter 8-Bolt Hubs - Zinc - Qty
In Stock
These 2.72" OD EZ Lube grease caps seal your Dexter hub and let you add grease through the spindle. Zinc-plated steel resists rust. Designed for 12" x 2" Dexter hubs with 8-bolt pattern. Includes 2 caps with rubber plugs.
- Trailer Bearings Races Seals Caps
- Caps
- EZ Lube Grease Cap
- 2.72 Inch O.D.
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- Dexter
Dexter Single Hydraulic Jack System w/ Double Acting Pump - 7,000 lbs
Smooth and powerful hydraulic jack kit includes everything you need to lift your heavy load with a press of a button. The selector valve safely controls movement while the pivoting foot pad stabilizes the jack on rough terrain.
- Trailer Jack
- 5th Wheel Trailer
- Dump Trailer
- Gooseneck Trailer
- Enclosed Trailer
- Side-Mount Jacks
- 10001 lbs or More
- Hydraulic Jack
- Bolt-On
- With Rectangle Foot
- Dexter
Dexter Vault Hybrid Lubrication System for 2,500-lb to 3,500-lb Trailer Buddy Axles
The Vault by Dexter is a maintenance-free bearing system. As bearing temperatures rise during towing, the hybrid oil thins out to replenish bearings with lubricant and dissipate heat. Pressurized, sealed chamber means nothing gets in or out.
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 2500 lbs Axle
- 3200 lbs Axle
- 3500 lbs Axle
- Dexter
Dexter Swing-Away Coupler Hinge Kit for 3" x 4" Tongue - Weld On
Use this with actuators or standard couplers to build a foldaway tongue that tucks your trailer neatly out of the way, perfect for tight garages. Weld-on mounting creates a clean look. Easy storage, clean style, and solid function.
- Folding Trailer Tongue
- Coupler Hinge Kit
- Weld-On
- Dexter