New Arrivals

Replacement head assembly works with Blue Ox SwayPro weight distribution systems for trailers with underslung couplers. Includes replacement hardware.

• Accessories and Parts
• Weight Distribution Hitch
• Head
• Blue Ox

If you need to disconnect the battery to flat tow your vehicle, you're going to want this kit. It disconnects your battery with the turn of a knob - much safer and faster than doing it yourself - while keeping your towing accessories charged.

• Accessories and Parts
• Flat Tow Wiring Harness
• Auto Battery Disconnect
• Blue Ox

This hitch head assembly gives you 4" of extended shank to give you extra clearance for your tailgate, spare tire, and trailer accessories for easier hookup. Replaces the hitch head for your B&W Continuum weight distribution system.

• Accessories and Parts
• Weight Distribution Hitch
• Head
• Trunnion Bar
• B and W

Pair this center section with a custom mounting kit (sold separately) to get a sturdy hitch for towing your gooseneck trailer. Store the removable ball upside down in the hitch when you aren't towing to get total bed access.

• Accessories and Parts
• Gooseneck Hitch
• Hitch Only
• 30000 lbs GTW
• Turnover Ball Gooseneck
• B and W

This hitch head has a 4" extended drop to ensure a level, stable tow for your lifted truck or low-riding trailer. Replaces the hitch head for your B&W Continuum weight distribution system.

• Accessories and Parts
• Weight Distribution Hitch
• Head
• Trunnion Bar
• B and W

Keep the ball platform on your Tow & Stow - or the head on your Continuum hitch - secure on the shank with this sturdy, new lock. Because it's B&W, we're sure the lock will not only be well-made, but awesome looking on your hitch too!

• Accessories and Parts
• Trailer Hitch Ball Mount
• Drop Hitch
• Weight Distribution Hitch
• Locks
• Locking Pin
• B and W

This sturdy carbon-steel hitch ball is designed for use with B&W Continuum weight-distribution systems. Features 2-1/2" long x 1-1/4" diameter shank and 8,000-lb maximum GTW rating.

• Accessories and Parts
• Weight Distribution Hitch
• Sway Control Parts
• Ball
• B and W

This hitch head assembly gives you 4" of extended shank to give you extra clearance for your tailgate, spare tire, and trailer accessories for easier hookup. Replaces the hitch head for your B&W Continuum weight distribution system.

• Accessories and Parts
• Weight Distribution Hitch
• Head
• Trunnion Bar
• B and W

Replace your lost or damaged Andersen 2-5/16" weight distribution hitch ball. Designed for use with Andersen weight distribution hitches, this replacement restores safe towing performance.

• Accessories and Parts
• Weight Distribution Hitch
• Balls
• Andersen

If your factory gooseneck hitch has a pop-in ball, this adapter is the missing piece to mount your Andersen Ultimate Connection Hitch and tow your 5th wheel. No adapter means no towing, so slap this bad boy in and hit the road with confidence.

• Accessories and Parts
• 5th Wheel Gooseneck Adapter
• Adapters
• Pop-In Ball
• Andersen

Get the height your setup needs with this 14" square coupler tube for your Andersen Ultimate Connection. Extra height helps level your setup, improve clearance, and deliver the smooth towing experience you're after. Mounting bolts included.

• Accessories and Parts
• 5th Wheel Gooseneck Adapter
• Coupler
• Andersen

Replaces the 2-5/16" and 2" combo hitch ball for your Andersen EZ heavy-duty adjustable ball mount or weight distribution system. Includes combo ball and 2 pins and clips.

• Accessories and Parts
• Trailer Hitch Ball Mount
• Drop Hitch
• Balls
• Dual Ball
• 2 Inch Ball
• 2-5/16 Inch Ball
• Andersen

This tire change kit makes swapping out a flat on your multi-axle trailer a total breeze. Just drive the good tire up onto the leveler to raise the adjacent tire up to 4" off the ground. You will be back on the road in no time.

• Wheel Chocks
• Accessories and Parts
• Trailer Tires and Wheels
• Tire Change Jack
• Andersen

Need more slack in your Andersen weight-distribution tension chains? Add up to 11-1/4" instantly with these extensions6 links plus a threaded coupler per side. Remove any links you dont need for a custom fit and smoother hitch setup.

• Accessories and Parts
• Weight Distribution Hitch
• Chains
• Andersen

You're lining up the fifth wheel, solo in the driveway, no spotter this time. With one try, it clicks into place. You step out, check the connection, and smile. That funnel did exactly what it promised.

• Accessories and Parts
• 5th Wheel Hitch
• Gooseneck Coupler Adapter
• Andersen

When you bleed pressure just to swap tools or close a line, you lose time waiting for your compressor to recover. This in-line valve lets you shut things off with a quarter turn and hold pressure in the system so you can keep working.

• Accessories and Parts
• On Board Air Compressor
• Tire Inflator
• Vehicle Suspension
• Air Bag Compressor Kit
• Valves
• Bulldog Winch

Control your vehicle's lights, air compressor, batteries, air lockers, and more, all from a single 8-switch panel. Control box mounts under the hood and powers switch panel via the included wiring harness.

• Accessories and Parts
• Wiring
• Switches
• Switch Panel
• Bulldog Winch

Some valve stems are tucked behind a fender or sit at a weird angle. This short, flexible hose gives you a little slack at the valve so you can connect the chuck without bending the main line or working at an awkward angle.

• Accessories and Parts
• Tire Inflator
• Valves
• Air Chuck
• Bulldog Winch

Some air chucks leak or pop off unless you hold them in place. This one pushes on and locks down so you can let go while the tire inflates. The internal shut-off keeps air in the system when it's not connected to a valve.

• Accessories and Parts
• Tire Inflator
• Valves
• Air Chuck
• Bulldog Winch

Control your vehicle's lights, air compressor, batteries, air lockers, and more, all from your phone or the 8-switch panel. Bluetooth-enabled control box mounts under the hood and powers switch panel via the included wiring harness.

• Accessories and Parts
• Wiring
• Switches
• Switch Panel
• Bulldog Winch

Some valve stems are buried deep or sit at the wrong angle for a standard chuck. This dual-head chuck with a flexible hose gives you the reach and angle you need to push the chuck onto the valve and fill the tire, even in tight spots.

• Accessories and Parts
• Air Bag Compressor Kit
• Tire Inflator
• On Board Air Compressor
• Vehicle Suspension
• Valves
• Air Chuck
• Bulldog Winch

Make it easier to reach your winch control plug with a 3' extension cord. Lets you plug in your wired controller even if your winch is mounted in a hard to reach location.

• Accessories and Parts
• Electric Winch
• Wiring
• Extension
• Plugs
• Bulldog Winch

You've got a compressor mounted in your truck or set up in the shop, so you're not about to move it. This hose lets you air up tires or run pneumatic tools up to 30 feet away. Works with most compressors using 1/4" connections.

• Accessories and Parts
• Vehicle Suspension
• Air Bag Compressor Kit
• Tire Inflator
• On Board Air Compressor
• Air Compressor Parts
• Hoses
• Bulldog Winch

Repairs the latching mechanism in your BedSlide truck bed slide. Works with all BedSlides made between 2010 and 2013. Kit includes 2 lock pins, 2 springs, 2 hairpin clips, and instructions.

• Accessories and Parts
• Truck Bed Slide
• Latches
• BedSlide