New Arrivals

Coupler repair kit contains all needed replacement parts for your CE Smith straight-tongue coupler with a 3,500-lb or 5,000-lb capacity, except for the coupler housing.

• Accessories and Parts
• Straight Tongue Trailer Coupler
• Coupler Repair
• CE Smith

Rustproof, durable aluminum bracket lets you mount a tail light to your trailer frame.

• Accessories and Parts
• Trailer Lights
• Mounting Hardware
• Brackets
• CE Smith

Replace the spindle nuts, washers, and cotter pins on your axle shaft with this kit from CE Smith.

• Accessories and Parts
• Trailer Suspension Parts
• Trailer Axles
• Hardware
• Nuts
• CE Smith

These brackets let you mount your single-axle fenders with side steps to your trailer. Includes 2 bolt-on, galvanized brackets to mount one fender. Works with CE19502, CE19503, CE19504 fenders (sold separately).

• Accessories and Parts
• Trailer Fenders
• Mounting Hardware
• Brackets
• CE Smith

Replaces the 90-degree post for your CE Smith post-style boat trailer guide-ons (27635, 27637, or 27638).

• Accessories and Parts
• Boat Trailer Parts
• Guide-On Parts
• Posts
• CE Smith

This towing safety flag is ideal for your kayak, SUP, or anything else you want to tow and draw attention to. Made of Oxford fabric and nylon webbing, so it holds up for the long haul.

• Accessories and Parts
• Trailers
• Watersport Carriers
• Sports Trailer Parts
• Watersport Trailer Parts
• Safety Flag
• CE Smith

Rustproof, durable aluminum bracket lets you mount a tail light to your trailer frame.

• Accessories and Parts
• Trailer Lights
• Mounting Hardware
• Brackets
• CE Smith

Rustproof, durable aluminum bracket lets you mount a tail light to your trailer frame.

• Accessories and Parts
• Trailer Lights
• Mounting Hardware
• Brackets
• CE Smith

This rust-resistant bracket lets you mount a bunk board vertically on your boat trailer. It's adjustable, so if you need to move your bunk up or down, just loosen the bolts a little and adjust as needed.

• Accessories and Parts
• Boat Trailer Parts
• Brackets
• Bunk Bracket
• CE Smith

Rustproof, durable aluminum bracket lets you mount a tail light to your trailer frame.

• Accessories and Parts
• Trailer Lights
• Mounting Hardware
• Brackets
• CE Smith

Demco's eZ-Latch coupler latch is now available for your gooseneck trailer! This gooseneck coupler head assembly welds onto the stem of your trailer.

• Accessories and Parts
• Gooseneck Coupler
• Head
• Demco

Replaces the 0.625" hex nut that secures the coupler to your Demco Recon gooseneck to 5th wheel hitch adapter base (DM6021).

• Accessories and Parts
• 5th Wheel Gooseneck Adapter
• Hardware
• Nuts
• Hex Nut
• Demco

Replacement 4" x 0.625" full thread Grade 5 bolt for your Demco Recon gooseneck to 5th wheel hitch adapter base (DM6021).

• Accessories and Parts
• 5th Wheel Gooseneck Adapter
• Hardware
• Bolts
• Demco

Replaces the wear plate on your 18,000-lb or 21,000-lb Demco Auto-slide fifth-wheel hitch.

• Accessories and Parts
• 5th Wheel Hitch
• Plates
• Wear Plates
• Demco

Bolt this locking plate onto your Lippert Helux pin box to prevent the king pin from rotating inside your Demco Autoslide fifth-wheel trailer hitch. Hardware included.

• Accessories and Parts
• 5th Wheel Pin Box
• Locking Plate
• Lippert Helux
• Demco

Replaces the 2-5/16" coupler for your Demco Recon Gooseneck to 5th wheel hitch adapter base (DM6021). Provides the attachment point for the gooseneck ball in your truck bed.

• Accessories and Parts
• 5th Wheel Gooseneck Adapter
• Coupler
• Demco

Square tube welds onto your trailer. Works with 4" width inner tubes (sold separately). Pairs perfectly with the eZ-Latch gooseneck coupler DM43KV (sold separately).

• Accessories and Parts
• Gooseneck Coupler
• Outer Tube
• Demco

Add extra strength where your Demco cable anchor bolts to the firewall. This steel plate reinforces thin firewalls for Air Force One or Stay-IN-Play Duo installs, keeping the anchor secure.

• Accessories and Parts
• Flat Tow Brake System
• Hardware
• Plates
• Demco SBS

Replaces 1 of the hard plastic cap plugs that install in the 2-1/2" square guide tubes on your Demco Autoslide fifth-wheel hitch. 2 Originally included with your hitch.

• Accessories and Parts
• 5th Wheel Hitch
• Plugs
• Slider
• Demco RV

Replaces a worn or missing ramp bushing on your Demco Kar Kaddy SS tow dolly. This bushing ensures proper spacing, allowing the ramp to tilt up for storage and secure in lowered position for loading.

• Accessories and Parts
• Trailers
• Hardware
• Bushings
• Demco RV

Round tube welds onto your trailer. Works with 4" diameter inner tubes (sold separately). Pairs perfectly with the eZ-Latch gooseneck coupler DM73KV (sold separately).

• Accessories and Parts
• Gooseneck Coupler
• Outer Tube
• Demco

Replace a worn or damaged clevis on your first-generation Demco Excali-Bar tow bar (9511006) with this exact-fit part. Built to keep your tow bar securely attached to your base plate, it restores the solid link your flat towing setup relies on.

• Accessories and Parts
• Tow Bar
• Clevis
• Excalibar
• Demco

Demco's eZ-Latch coupler latch is now available for your gooseneck trailer! This gooseneck coupler head assembly welds onto the stem of your trailer.

• Accessories and Parts
• Gooseneck Coupler
• Head
• Demco

Replaces the 0.625" jam nut for your Demco Recon gooseneck to 5th wheel hitch adapter base (DM6021).

• Accessories and Parts
• 5th Wheel Gooseneck Adapter
• Hardware
• Nuts
• Jam Nut
• Demco