New Arrivals

Replaces the base for your PullRite ISRX Super or SuperLite 5th-wheel hitch for industry-standard rails. Rated for 24,000 lbs gross towing weight.

• Accessories and Parts
• 5th Wheel Hitch
• Base
• Pullrite

Bolt this capture plate onto your Lippert 0719 pin box to prevent the king pin from rotating inside your PullRite fifth-wheel hitch.

• Accessories and Parts
• 5th Wheel Pin Box
• Locking Plate
• Lippert Pin Box
• Pullrite

Take control of every turn with the PullRite SuperGlide Capture Plate! Built for 12-1/2" MOR/ryde pin boxes, it locks in a secure hitch connection, smooth auto sliding & stress-free towing. Durable, easy to install & ready for the long haul.

• Accessories and Parts
• 5th Wheel Pin Box
• Locking Plate
• MORryde Pin Box
• Pullrite

Use this plate to keep your trailer's king pin from rotating in your PullRite SuperGlide hitch. A capture plate is required for you to tow with the SuperGlide. This plate fits Lippert 1621 pin boxes with skid plates that are 12-3/4" wide.

• Accessories and Parts
• 5th Wheel Pin Box
• Locking Plate
• Trailair Pin Box
• Pullrite

Protect the finish on your hitch and truck bed with these lube plates. Designed for the #2600 SuperLite 20K and #3900 Super 5th 24K hitches, these durable nylon plates reduce friction and eliminate the need for messy lubricants.

• Accessories and Parts
• 5th Wheel Hitch
• Plates
• Lube Plate
• Pullrite

Use this plate to keep your trailer's king pin from rotating in your PullRite SuperGlide hitch. A capture plate is required for you to tow with the SuperGlide. This plate fits Flex Air pin boxes with skid plates that are 13-1/4" wide.

• Accessories and Parts
• 5th Wheel Pin Box
• Locking Plate
• Trailair Pin Box
• Pullrite

Replace your RV's old or damaged awning roller and fabric with this heavy-duty assembly. Fits Edge and 2000 series 8' power awnings with a built-in LED strip. Installs more easily than replacing just the fabric.

• Accessories and Parts
• RV Awnings
• Fabric
• 8 Feet Wide
• Extends 7 Feet
• Black Fade
• Lippert

Replaces the OneControl Advantage controller with Bluetooth for your Lippert Level Up RV leveling system. Fits all Lippert Level Up leveling systems. Includes flat mounting brackets and hardware.

• Accessories and Parts
• Camper Jacks
• Controllers
• Control Module
• Lippert

A damaged harness can make your RV's leveling system unreliable. This 25' replacement restores electrical connections, helping your jacks work smoothly. Designed for Lippert Level-Up systems, it's a simple fix to get you back to camping.

• Accessories and Parts
• Camper Jacks
• Trailer Jack
• Wiring Harness
• Lippert

Replaces the mounting hardware for your Lippert Solera RV slide-topper awning (LCV000168109).

• Accessories and Parts
• RV Awnings
• Mounting Hardware
• Lippert

Advantage 4-point Ground Control LCD electronics kit.

• Accessories and Parts
• Camper Jacks
• Trailer Jack
• Controllers
• Control Panel
• Lippert

Replaces the electric steps, motor, and control unit for your Kwikee 47 Series RV step. Motor and control unit automatically extend and retract the steps when you open and close the door. Wiring pigtail hardwires to your RV's power.

• Accessories and Parts
• RV Steps
• Motors
• Control Module
• Steps
• Lippert

This kit includes the hardware for your Solera 2000 Series or Edge awning. The needed awning roller tubes and fabrics are sold separately. The 58" long arms offer sliding adjustable pitch. The wire is located at the bottom.

• Accessories and Parts
• RV Awnings
• Arms
• Pitch Arms
• Lippert

Replaces the cartridge valve for your Lippert Flow Max kitchen or bathroom faucet.

• Accessories and Parts
• RV Faucets
• Cartridge
• Lippert

Pop these durable polycarbonate spacers onto the pivot bar of your Mad-Ramps setup (MR54FR) to keep the ramps from shifting side to side.

• Accessories and Parts
• Truck Ramps
• ATV Ramps
• Spacers
• Mad-Ramps

Replaces the grab handle underneath your StepAbove RV steps. Grasp and pull to lower your RV steps into position. Fits all StepAbove RV steps.

• Accessories and Parts
• RV Steps
• Grab Handles and Handrails
• Fixed Handle
• MORryde

Gives you a dedicated spot - other than your camper basement - to stow your weight distribution hitch and spring bars. Just place it on your A-frame to secure your equipment and free up more space in your camper or truck. Removes between uses.

• Accessories and Parts
• Weight Distribution Hitch
• Covers and Storage
• Brackets
• MORryde

Replaces a MORryde rubber shear spring embossed with "30". Works with MORryde rubber leaf spring suspension systems.

• Accessories and Parts
• Trailer Suspension Parts
• Springs
• MORryde

Replaces the #04 rubber shear spring on MORryde's rubber pin boxes for trailers between 11,501 - 14,000 lbs GVWR. Helps absorb and dampen road shock, vibration, and reduces chucking. Installs on the skid pad with your existing hardware.

• Accessories and Parts
• 5th Wheel Pin Box
• Shear Springs
• MORryde

Turn your Mad-Ramps pivoting system into a set of standard loading ramps so you can get your equipment up and into your truck bed. Just snap these onto the tops of your ramps to keep them from pivoting while you load.

• Accessories and Parts
• Truck Ramps
• ATV Ramps
• Pivot Stops
• Mad-Ramps

Easily and efficiently store your Mad-Ramps system (MR2000) with this solution that keeps your equipment up off your garage floor. Just bolt the Mad-Mount to the wall of your shop or garage, and get simple storage for each piece of your system.

• Accessories and Parts
• ATV Ramps
• Truck Ramps
• Storage
• Mad-Ramps

Replaces a MORryde rubber shear spring embossed with "35". Works with MORryde rubber leaf spring suspension systems.

• Accessories and Parts
• Trailer Suspension Parts
• Springs
• MORryde

Get some added traction with these slip-resistant and marine-grade step treads. These step treads are designed specifically for the MORryde Gen II StepAbove 4-step with 19-1/2" treads. Applies quickly and easily with adhesive backing.

• Accessories and Parts
• RV Steps
• Grip Tape
• MORryde

Replaces (1) 1/2"-20 Grade 5 locknut for your MORryde suspension upgrade kit. Works with Correct Track, LRE, and RE suspension upgrade kits.

• Accessories and Parts
• Trailer Suspension Parts
• Hardware
• 1/2 Inch Diameter
• Nuts
• Suspension Nut
• MORryde