New Arrivals

A faulty harness can make your RV's leveling system unreliable. This replacement restores secure connections, ensuring smooth jack operation. Designed for Lippert Level-Up systems, it's an easy fix to get you back on the road with confidence.

• Accessories and Parts
• Trailer Jack
• Camper Jacks
• Wiring Harness
• Lippert

Replaces the surge protection module for your second generation 50-amp Hughes Watchdog surge protector (PWD50EPOW).

• Accessories and Parts
• RV Surge Protectors
• Surge Module
• 50 Amp
• Hughes Autoformers

Replaces the surge protection module for your second generation 30-amp Hughes Watchdog surge protector (PWD30EPOW).

• Accessories and Parts
• RV Surge Protectors
• Surge Module
• 30 Amp
• Hughes Autoformers

Replaces a brass bleed port on your Hydrastar caliper. Designed for use with Hydrastar disc brake systems.

• Accessories and Parts
• Trailer Brakes
• Disc Brakes
• Caliper Parts
• Bleed Valve
• Hydrastar

Replaces the ceramic brake pads for your Hydrastar disc brakes with 225 calipers. Works with 303-E36C and 303-E36CSS calipers. Includes 4 brake pads.

• Accessories and Parts
• Trailer Brakes
• Disc Brakes
• Brake Pads
• Hydrastar

Replaces the extension plates for your Chock-N-Lock wheel stabilizers (71001-BX). Expands your wheel chock to stabilize your trailer when parked. Includes one pair of plates.

• Accessories and Parts
• Camper Jacks
• Wheel Chocks
• Extension Plate
• InfiniteRule

Heavy-duty, stainless steel locks provide superior security when locking your B&W hitch step to your B&W Tow and Stow 2" or 2-1/2" ball mount. Third-party-tested pin has a 42,000-lb shear strength.

• Accessories and Parts
• Hitch Step
• Pins and Clips
• InfiniteRule

Replaces the DC power cord for your BrakeBuddy Vantage (39504), Select 2 (39523), or Select 3 (39524) portable braking system.

• Accessories and Parts
• Flat Tow Brake System
• Wiring
• Power Cord
• Brake Buddy

Got a factory tow package but haven't wired in your brake controller yet? No need to slice and splice. This adapter connects your Hopkins controller to the dash port. Setup is quick, easy to remove, and ready to tow or transfer to another ride.

• Accessories and Parts
• Trailer Brake Controller
• Wiring Adapter
• Plugs into Brake Controller
• Vehicle Specific
• Hopkins

All it takes is one worn brake to throw your trailer off. Replacing a single ABS brake assembly restores smoother stopping and steadier tracking, so you stay in control on steep grades, in crosswinds, and during sudden traffic stops.

• Accessories and Parts
• Trailer Brakes
• Electric Drum Brakes
• RH
• 5200 - 7000 lbs
• Brake Assembly
• 12 x 2 Inch Drum
• Lippert

Replaces the 3/8" x 2-1/8" pin for your Lippert Solera RV awning. Dacromet finish provides corrosion resistance.

• Accessories and Parts
• RV Awnings
• Hardware
• Pins
• Lippert

Replace a cracked or faded switch bezel on your Power Gear leveling system with this black/silver trim piece. Snaps in easily for a quick cosmetic fix. Works on select Power Gear RV leveling system control panels.

• Accessories and Parts
• Camper Jacks
• Trailer Jack
• Controllers
• Control Panel
• Bezel
• Lippert

Replace your RV's old or damaged awning roller and fabric with this heavy-duty assembly. Fits Edge and 2000 series 8' power awnings with a built-in LED strip. Installs more easily than replacing just the fabric.

• Accessories and Parts
• RV Awnings
• Fabric
• 8 Feet Wide
• Extends 7 Feet
• Black Fade
• Lippert

Restore push-button power to your Solera awning with this replacement arm kit featuring matching 69 inch Regal arms, flat-back mounts, top-routed wiring, and a black 12-volt rocker switch - just swap the arms and keep your current fabric and roller.

• Accessories and Parts
• RV Awnings
• Arms
• 69 Inch Long
• Pitch Arms
• Flat Awnings
• Black
• Lippert

Replaces the auto-leveling control box for your Lippert Power Gear hydraulic RV leveling system.

• Accessories and Parts
• Trailer Jack
• Control Panel
• Lippert

A damaged harness can make your RV's leveling system unreliable. This 25' replacement restores electrical connections, helping your jacks work smoothly. Designed for Lippert Level-Up systems, it's a simple fix to get you back to camping.

• Accessories and Parts
• Camper Jacks
• Trailer Jack
• Wiring Harness
• Lippert

Restore your Solera Edge slide-out awning with this full idler side replacement kit. Designed for all Solera Edge toppers, it includes black-finished hardware and wire support components for a secure, like-new installation.

• Accessories and Parts
• RV Awning
• Hardware
• Lippert

Replaces the electric steps, motor, and control unit for your Kwikee 47 Series RV step. Motor and control unit automatically extend and retract the steps when you open and close the door. Wiring pigtail hardwires to your RV's power.

• Accessories and Parts
• RV Steps
• Motors
• Control Module
• Steps
• Lippert

This kit includes the hardware for your Solera 2000 Series or Edge awning. The needed awning roller tubes and fabrics are sold separately. The 58" long arms offer sliding adjustable pitch. The wire is located at the bottom.

• Accessories and Parts
• RV Awnings
• Arms
• Pitch Arms
• Lippert

Replaces the front cover of the drive head on your Lippert Edge RV awning.

• Accessories and Parts
• RV Awnings
• Head Parts
• Head Cover
• Drive Head
• White
• Lippert

All it takes is one worn brake to throw your trailer off. Replacing a single ABS brake assembly restores smoother stopping and steadier tracking, so you stay in control on steep grades, in crosswinds, and during sudden traffic stops.

• Accessories and Parts
• Trailer Brakes
• Electric Drum Brakes
• RH
• 3500 lbs
• Brake Assembly
• 10 x 2-1/4 Inch Drum
• Lippert

Repair your Lippert leveling system with this replacement hydraulic pump. The 1.2-gal reservoir keeps fluid flowing, while the 4-bank manifold distributes pressure. Pre-wired for easy installation, so you can get back to smooth, reliable leveling.

• Accessories and Parts
• Camper Jacks
• Trailer Jack
• Hydraulic Parts
• Pumps
• Lippert

Replaces the prop rod assembly on your Leer tri-fold tonneau cover (631304, 631130, 631137, 631288 and 631336).

• Accessories and Parts
• Tonneau Cover
• Prop Rods
• Leer Tri-Fold
• Leer

Replaces the snap-on ball socket end for your Leer tonneau cover's prop rod. Connects your prop rod to the ball stud on your tonneau cover.

• Accessories and Parts
• Tonneau Cover
• Prop Rods
• Leer Tri-Fold
• Leer Quad-Fold
• Leer