New Arrivals

This fitting replaces the 1/4" pushlock to male 1/8" NPTM fitting for your Demco Air Force One supplemental braking system. Straight design allows for streamlined routing of your air line.

• Accessories and Parts
• Flat Tow Brake System
• Fittings
• Pushlock
• Demco SBS

Replaces the bent handle pin and clip for your Demco Recon Gooseneck to 5th wheel hitch adapter base (DM6021). Secures the coupler into the base platform.

• Accessories and Parts
• 5th Wheel Gooseneck Adapter
• Pins and Clips
• Demco

Replaces the composite handle on your 2" or 2-5/16" Demco coupler with an eZ-Latch composite latch.

• Accessories and Parts
• A-Frame Trailer Coupler
• Adjustable Trailer Coupler
• Straight Tongue Trailer Coupler
• Handles
• Demco

Demco's eZ-Latch coupler latch is now available for your gooseneck trailer! This gooseneck coupler head assembly welds onto the stem of your trailer.

• Accessories and Parts
• Gooseneck Coupler
• Head
• Demco

Replaces the 0.625" hex nut that secures the coupler to your Demco Recon gooseneck to 5th wheel hitch adapter base (DM6021).

• Accessories and Parts
• 5th Wheel Gooseneck Adapter
• Hardware
• Nuts
• Hex Nut
• Demco

Replacement 4" x 0.625" full thread Grade 5 bolt for your Demco Recon gooseneck to 5th wheel hitch adapter base (DM6021).

• Accessories and Parts
• 5th Wheel Gooseneck Adapter
• Hardware
• Bolts
• Demco

Replaces the wear plate on your 18,000-lb or 21,000-lb Demco Auto-slide fifth-wheel hitch.

• Accessories and Parts
• 5th Wheel Hitch
• Plates
• Wear Plates
• Demco

Bolt this locking plate onto your Lippert Helux pin box to prevent the king pin from rotating inside your Demco Autoslide fifth-wheel trailer hitch. Hardware included.

• Accessories and Parts
• 5th Wheel Pin Box
• Locking Plate
• Lippert Helux
• Demco

Replaces the 2-5/16" coupler for your Demco Recon Gooseneck to 5th wheel hitch adapter base (DM6021). Provides the attachment point for the gooseneck ball in your truck bed.

• Accessories and Parts
• 5th Wheel Gooseneck Adapter
• Coupler
• Demco

Simple, but strong, flat hook for use with 2" utility and tie-down straps. Saddle protects the material and reduces the risk of fraying under load. Rated for a 3,335 lb Load limit.

• Accessories and Parts
• Tie Down Straps
• Hooks
• Flat Hook
• Durabilt

Great for vehicle recovery use in the field, this simple J-style tow hook is easily attached and quickly removed. The 15" long hook has a clevis pin attachment for your Grade 70 (6,600 WLL) or Grade 80 (7,100 WLL) 3/8" chain.

• Accessories and Parts
• Tow Straps and Recovery Straps
• Hooks
• J-Hooks
• Durabilt

Add this slip hook to your 5/16", Grade 70 chain as a secure connector for tying down heavier cargo or equipment. After installing, you can clip the hook onto a fixed point on your equipment or trailer. Integrated, spring-loaded safety latch.

• Accessories and Parts
• Car Tie Down Straps
• Clevis Hooks
• 4700 lbs GTW
• Durabilt

Add this hook to your 3/8" Grade 70 chain to add a secure connection point when tying down heavier cargo or equipment. After installing, use the grab hook to shorten a chain length or attach it to a fixed point on your equipment or trailer.

• Accessories and Parts
• Car Tie Down Straps
• Clevis Hooks
• 6600 lbs GTW
• Durabilt

Add this slip hook to your 3/8", Grade 70 chain as a secure connector for tying down heavier cargo or equipment. After installing, you can clip the hook onto a fixed point on your equipment or trailer. Integrated, spring-loaded safety latch.

• Accessories and Parts
• Car Tie Down Straps
• Clevis Hooks
• 6600 lbs GTW
• Durabilt

This brake assembly is engineered for trailers with 9,000 to 10,000 lbs. axles. Its self-adjusting to ensure optimal braking efficiency with minimal maintenance. The integrated parking brake lever adds convenience and safety.

• Accessories and Parts
• Trailer Brakes
• Hydraulic Drum Brakes
• LH
• 10000 lbs
• 9000 lbs
• Brake Assembly
• 12-1/4 x 3-3/8 Inch Drum
• Dexter

Restore the performance of your Fortress oil cap with this complete service kit. Includes rubber plugs, oil fill plugs, and O-ring seals to prevent leaks, maintain pressure, and keep your hub looking squeaky clean.

• Accessories and Parts
• Trailer Bearings Races Seals Caps
• Service Kit
• Dexter

Protect your brakes from dust and grime with this dust shield. Works for your 12-1/4" X 2-1/2" brakes for 7.2K axles. The 4-hole mounting pattern makes it easy to install. Painted finish provides a level of corosion resistance.

• Accessories and Parts
• Trailer Brakes
• Hydraulic Drum Brakes
• Electric Drum Brakes
• Dust Shield
• Dexter

This replacement inner member slide easily fits into the existing housing of your Dexter A-84 Series or Legacy UFP surge brake actuator. For use with triple-axle trailers with hydraulic disc brakes.

• Accessories and Parts
• Brake Actuator
• Disc Brakes
• Inner Member
• Dexter

Replaces (1) 3-1/2" x 5/8"-18 Dexter Axle press-in wheel stud for 8K to 12K disc brakes or idler hubs with 5/8" studs.

• Accessories and Parts
• Boat Trailer Wheels
• Trailer Hubs and Drums
• Trailer Tires and Wheels
• Wheel Studs
• 5/8 Inch Diameter
• Drive-In Stud
• Dexter

Restore the performance of your Fortress oil cap with this complete service kit. Includes rubber plugs, oil fill plugs, and O-ring seals to prevent leaks, maintain pressure, and keep your hub looking squeaky clean.

• Accessories and Parts
• Trailer Bearings Races Seals Caps
• Service Kit
• Dexter

Replace or add a reverse lockout solenoid to your surge brake actuator from Dexter or Tie Down Engineering to keep the actuator from activating your trailer brakes when you shift into reverse.

• Accessories and Parts
• Brake Actuator
• Disc Brakes
• Hydraulic Drum Brakes
• Solenoid
• Dexter

This brake assembly is engineered for trailers with 9,000 to 10,000 lbs. axles. Its self-adjusting to ensure optimal braking efficiency with minimal maintenance. The integrated parking brake lever adds convenience and safety.

• Accessories and Parts
• Trailer Brakes
• Hydraulic Drum Brakes
• RH
• 10000 lbs
• 9000 lbs
• Brake Assembly
• 12-1/4 x 3-3/8 Inch Drum
• Dexter

Restore the performance of your Fortress oil cap with this complete service kit. Includes rubber plugs, oil fill plugs, and O-ring seals to prevent leaks, maintain pressure, and keep your hub looking squeaky clean.

• Accessories and Parts
• Trailer Bearings Races Seals Caps
• Service Kit
• Dexter

Replace a worn or leaking copper washer on your Dexter disc brake caliper. This 7/16" crush washer provides a tight, reliable seal between the banjo fitting and caliper to help prevent brake fluid leaks in your hydraulic braking system.

• Accessories and Parts
• Trailer Brakes
• Disc Brakes
• Hardware
• Caliper Parts
• Washers
• Dexter