New Arrivals

Use this plate to keep your trailer's king pin from rotating in your PullRite SuperGlide hitch. A capture plate is required for you to tow with the SuperGlide. This plate fits Flex Air pin boxes with skid plates that are 13-1/4" wide.

• Accessories and Parts
• 5th Wheel Pin Box
• Locking Plate
• Trailair Pin Box
• Pullrite

Mount your Traditional Series PullRite SuperGlide hitch to industry standard base rails or gooseneck mounts using this adapter kit. Works with 4100, 4400, and discontinued 3300 models. Base rails sold separately.

• Accessories and Parts
• 5th Wheel Hitch Rails
• Adapters
• Rail Adapter
• Pullrite

Replace a damaged or worn spring bar on your Curt TruTrack 2P system with this forged steel bar. Designed for 5,000-lb to 8,000-lb setups only (17599). Restores sway control and load leveling for safer, more stable towing.

• Accessories and Parts
• Weight Distribution Hitch
• Spring Bars
• Sqaure Bar
• CURT

Install your Curt electric trailer brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your controller and then plug the other end into the built-in port beneath your vehicle's dash.

• Accessories and Parts
• Trailer Brake Controller
• Wiring Adapter
• Plugs into Brake Controller
• Vehicle Specific
• CURT

For heavy-duty applications, this strap has a break strength of 4,800 lbs and a working load limit of 1,600 lbs.

• Accessories and Parts
• Trailer Winch
• Cables and Straps
• 22-3/8 Inch Wide
• 1600 lbs
• Straps
• CURT

Install your Curt electric trailer brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in port beneath your driver's seat.

• Accessories and Parts
• Trailer Brake Controller
• Wiring Adapter
• Plugs into Brake Controller
• Vehicle Specific
• CURT

Replaces the spring bar for your Curt TruTrack 4P trailer-mounted weight distribution system (17520).

• Accessories and Parts
• Weight Distribution Hitch
• Spring Bars
• Square Bar
• CURT

Replaces the short bed bracket for your Curt OEM puck system gooseneck ball kit (C60668 or C60663). Compatible with 2023-2025 GMC Sierra and Chevrolet Silverado trucks with 6.5' short beds.

• Accessories and Parts
• Trailer Hitch Ball
• Mounting Hardware
• Brackets
• CURT

Install your Curt electric trailer brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in port beneath your vehicle's dash.

• Accessories and Parts
• Trailer Brake Controller
• Wiring Adapter
• Plugs into Brake Controller
• Vehicle Specific
• CURT

For heavy-duty applications that require cable, this steel winch cable has a break strength of 4,200 lbs and a working load limit of 1,400 lbs.

• Accessories and Parts
• Electric Winch
• Trailer Winch
• Cables and Straps
• 3/16 Inch Diameter
• 4200 lbs
• Wire Rope
• CURT

Replaces the mounting hardware for your Curt 70129 tow bar base plate. Restores secure fit on Jeep Gladiator JT.

• Accessories and Parts
• Tow Bar Base Plate
• Hardware
• CURT

Replace the ball on your Curt TruTrack 2P hitch with this 2-5/16" steel ball. Made for 5,000-lb to 8,000-lb systems only (17599), it bolts to the head and matches your system's capacity for safe, stable towing.

• Accessories and Parts
• Weight Distribution Hitch
• Balls
• CURT

Restore your Curt TruTrack 2P hitch with this direct replacement head. Built to fit 5,000-lb to 8,000-lb systems only (17599), it keeps your setup towing straight with integrated sway control right where you need it.

• Accessories and Parts
• Weight Distribution Hitch
• Head
• CURT

Replace the lost or damaged center pin for your Curt PowerRide fifth-wheel trailer hitch. Pin secures the 5th wheel head to the hitch body.

• Accessories and Parts
• 5th Wheel Hitch
• Pins and Clips
• CURT

Replace a lost or damaged bracket or install one in a second vehicle to easily transfer your Curt NEXT brake controller. The low-profile design installs above or below the dash and includes multiple mounting options for a secure, unobtrusive fit.

• Accessories and Parts
• Trailer Brake Controller
• Mounting Hardware
• Brackets
• CURT

For heavy-duty applications that require cable, this steel winch cable has a break strength of 5,600 lbs and a working load limit of 1,865 lbs.

• Accessories and Parts
• Electric Winch
• Trailer Winch
• Cables and Straps
• 7/32 Inch Diameter
• 5600 lbs
• Wire Rope
• CURT

Lost the key to your etrailer tongue tool box? Don't worry, we've got you covered. Replaces 1 key number CH503.

• Accessories and Parts
• Trailer Tongue Box
• Trailer Tool Box
• Keys
• etrailer

10-1/2" x 13-3/4". Tired of the rain damaging your electric tongue jack? Slip this weatherproof cover over your jack and secure it with a simple drawstring to keep the elements at bay. Fits most brands and styles of electric A-frame jacks.

• Accessories and Parts
• Camper Jacks
• Trailer Jack
• Covers
• etrailer

Keyed alike lock set includes anti-rattle hitch lock to secure your 2" hitch-mounted bike rack to your hitch, 10' cable lock to secure your bike to the rack, and extension lock for Benton 4-bike platform rack.

• Accessories and Parts
• Bike Locks
• Trailer Hitch Lock
• Cable Locks
• Keyed Alike
• Steel
• 10 Feet Long
• etrailer

Replaces the cross shaft on your etrailer or Ram fifth-wheel landing gear (RVLG-8000).

• Accessories and Parts
• Camper Jacks
• Trailer Jack
• Cross Shaft
• etrailer

Replaces 1 pin used to secure your etrailer tow bar to your Roadmaster Direct-Connect base plate.

• Accessories and Parts
• Tow Bar
• Pins and Clips
• etrailer

Restore your Dutton-Lainson StrongArm DC electric winch's functionality with this Switch Pocket Replacement Kit. Includes all necessary hardware for a complete and secure repair.

• Accessories and Parts
• Electric Winch
• Switches
• Dutton-Lainson

Replaces (1) 3/8" x 3" barbed air line T-Connector for your Demco Stay-IN-Play Duo supplemental braking system (SM99251 or SM99243).

• Accessories and Parts
• Flat Tow Brake System
• Air Lines
• Tees
• Demco

This fitting replaces the 1/4" pushlock to male 1/8" NPTM fitting for your Demco Air Force One supplemental braking system. Straight design allows for streamlined routing of your air line.

• Accessories and Parts
• Flat Tow Brake System
• Fittings
• Pushlock
• Demco SBS