Replaces the clear light cover on all ARB Solis 36 lights. Clips onto all ARB Solis 36 lights. Polycarbonate cover clips into place to protect your bezel and lens from impact.
Confidently install your Old Man Emu leaf springs with this custom-fit replacement U-bolt kit, including 1 U-bolt, 2 washers, and 2 nuts. Most setups need 2 U-bolts per spring, so order accordingly if not reusing existing hardware.
Worn bushings cause clunking, poor handling, and alignment issues. If your suspension feels loose or noisy, replacing your bushings may bring back control, comfort, and confidence - without replacing major components.
Protect your investment and add options to your Intensity V2 driving lights with clip-on polycarbonate covers. Used with round spot or flood lights, the amber color adds contrast in fog or wet conditions, while limiting impact damage. Sold as a pair.
You've got the compressor, now you need a smart place to mount it. This bolt-on bracket tucks your ARB air compressor neatly under the hood of your Ford Bronco, with room for switches, manifold, and all the trail-day essentials.
Added gear can cause rear suspension sag, throwing off ride height and handling. A 5 mm coil spring packer levels your stance by compensating for uneven weight. Easy to install, it provides a subtle but effective lift for better balance and control.
Simplify installation of Old Man Emu leaf springs on your truck with the FK91 replacement mounting bolt. Designed for the driver's side front mount, this kit eliminates the need to lower the gas tank by replacing the OE mounting bolt.
Replaces a spot beam light pod for your ARB Solis 36 light or Solis 36 light kit. 7" Round pod built for off-road driving in extreme conditions. Has universal pedestal mount and security hardware. 17-3/4" long, 4-pin AT connector.
This hitch head assembly gives you 4" of extended shank to give you extra clearance for your tailgate, spare tire, and trailer accessories for easier hookup. Replaces the hitch head for your B&W Continuum weight distribution system.
Pair this center section with a custom mounting kit (sold separately) to get a sturdy hitch for towing your gooseneck trailer. Store the removable ball upside down in the hitch when you aren't towing to get total bed access.
This hitch head has a 4" extended drop to ensure a level, stable tow for your lifted truck or low-riding trailer. Replaces the hitch head for your B&W Continuum weight distribution system.
Keep the ball platform on your Tow & Stow - or the head on your Continuum hitch - secure on the shank with this sturdy, new lock. Because it's B&W, we're sure the lock will not only be well-made, but awesome looking on your hitch too!
This sturdy carbon-steel hitch ball is designed for use with B&W Continuum weight-distribution systems. Features 2-1/2" long x 1-1/4" diameter shank and 8,000-lb maximum GTW rating.
From trail to tailgate, these color-changing, solar string lights set the mood and keep the party lit. Shatterproof bulbs, tough-as-trails design, and a built-in power bank make them adventure-ready. They also store easily when the party's over.
From trail to tailgate, these warm white solar string lights set the mood and keep the party lit. The shatterproof bulbs, tough-as-trails design, and a built-in power bank make them adventure-ready. They also store easily when the party's over.
From trail to tailgate, these color-changing, solar string lights set the mood and keep the party lit. Shatterproof bulbs, tough-as-trails design, and a built-in power bank make them adventure-ready. They also store easily when the party's over.
From trail to tailgate, these warm white solar string lights set the mood and keep the party lit. The shatterproof bulbs, tough-as-trails design, and a built-in power bank make them adventure-ready. They also store easily when the party's over.
This 7-way to SAE cable connects your vehicle with a 7-way RV style connector to a SAE power cable. Works with any 12V accessory that has a SAE connector on its power cord.
Mounting a WARN winch on your ARB bumper 3413050, 3432080, 3430020, or 3411050? If the spacings off, your install can stall. This spacer kit gives you the clearance you need to mount your winch cleanly and keep your build moving forward.
Fine-tune your vehicle's ride height and balance with this durable 10mm-thick x 70mm-wide leaf trim packer, designed specifically for Old Man Emu leaf springs.
Confidently install your Old Man Emu leaf springs with this custom-fit bushing kit. Includes 6 bushings made of durable polyurethane and rubber to reduce squeaks and last longer. Each spring requires one kit, so order accordingly.
Wiring loom extension set up specifically for use with the Intensity V1 Light Bars. Add 16' to the primary harness (3500810 - sold separately) for alternative installations. Utilizes waterproof 2-pin DTP connectors.
Keep your Old Man Emu leaf springs in top condition with this custom-fit shackle kit. Zerk fittings simplify lubrication, reducing wear and noise. Designed for CS055R leaf springs, the kit includes two complete shackles.
Confidently install your Old Man Emu leaf springs with this custom-fit bushing kit. Includes 4 bushings and 2 sleeves made of durable polyurethane and rubber to reduce squeaks and last longer. Each spring requires one kit, so order accordingly.