Kit provides versatile tie down points for securing cargo in your enclosed trailer, van, or pickup bed. Included are (2) 18" long aluminum tracks and 4 anchor rings. The rings can be set every 2 inches on the track to tie-off all types of items.
Easily add a tie-down point to your truck with these Erickson stake pocket anchors. They install in your truck bed's stake pockets, safely handle a WLL of 2,000 pounds each and feature an attractive, chrome-plated finish.
Get a safer, more gradual incline for loading your 4-wheeled equipment with low ground clearance onto your truck bed. Serrated aluminum panels give tires grip, even in wet weather. Ramps resist rust and come with safety straps.
Aluminum loading ramp plates can quickly convert two 2" x 8" x 8' boards into an inexpensive loading ramp set to roll your ATV, snowblower, lawn mower, etc., into your pickup truck bed or onto a trailer.
This high-strength recovery rope helps you quickly and effectively recover a stuck car or Jeep. It transfers the kinetic energy of the tow vehicle into potential energy within the stretched rope to create the pull for snatch recovery.
Folding ramp makes it easier for you to load ATVs, mowers, and other wheeled equipment into your truck or trailer on your own. The larger loading surface eliminates the need to align ramps with vehicle wheels. Reinforced hinges connect three ramps.
Carry this tow strap with snap hooks in your truck or Jeep for emergency, short-distance tows. Durable polyester material resists cuts and abrasions so it's perfect for towing a tractor, truck, or any heavy vehicle. 10,000 lbs breaking strength.
Folding ramp makes it easier for you to load ATVs, mowers, and other wheeled equipment into your truck or trailer on your own. The larger loading surface with wider slats reduce risks while loading. Reinforced hinges connect three ramps.
Standard-duty winch with 1.6-hp, permanent magnet motor and mechanical brake lets you quickly and safely recover a stuck ATV. Sealed motor, gearbox, and contactor protect winch from the elements. Hand-held remote and handlebar rocker mount included.
Loose cargo, shifting gear - no thanks! These ratchet straps hold strong without the bulk, with a comfortable rubber-grip handle and S-hooks that stay put while you tighten down. Simple, secure, and ready for the day's adventure.
If you've ever watched a strap shift mid-haul or worried about gear bouncing loose on the road, you're not alone. This 4" ratchet strap was built for folks who haul heavy and expect their gear to hold up just as hard.
USA-made slipper leaf spring acts as part of your trailer's suspension system providing an attachment point for a 4,300-lb axle. Spring flexes to resist shock while ensuring a smooth ride. Includes bushing with 9/16" inner diameter.
Stream your favorite shows and movies while camping off-grid with this smart TV. 2 HDMI and 2 USB inputs let you add a DVD player, gaming console, and other devices. Runs off DC power from your RV's battery so an inverter isn't required.
Stream your favorite shows and movies while camping off-grid with this smart TV. 2 HDMI and 2 USB inputs let you add a DVD player, gaming console, and other devices. Runs off DC power from your RV's battery so an inverter isn't required.
Connect your smartphone to this stereo via Bluetooth so you can jam out to your favorites. 2-Zone output lets you play some tunes in 2 separate areas inside or outside your RV at the same time.
Pigtail makes the connection from the propane tanks on your trailer to the propane regulator. Also used to connect tanks to a high-pressure regulator to carry gas to a 2-stage regulator.
This adapter is required to use your JR Products LP Gas Manifold. 1/2" Manifold x 3/8" flare SAE adapter screws onto your existing RV manifold hose so you can simply plug it in to your manifold block.
There's a lot of useful ways to use this quick-disconnect propane port on your RV or hose. Mount outside your RV for a convenient port for cooking outside, or use it as an adapter on an auxiliary tank or hose to create a new QD connection.
Replace the broken catch on your storage doors with strong and simple magnets. Includes two magnets per set and mounting hardware. A great upgrade if you're done fumbling around with those manual, hook-style catches.
Connect up to 2 appliances to your RV's LP gas line with this simple plug and go manifold - no frustrating teflon tape needed! Enjoy the flexibility of powering up your appliances from one central point while minimizing safety risks.
This adapter is required to use your JR Products LP Gas Manifold. 1/2" Manifold x 1/4" NPT adapter screws onto your existing RV manifold hose so you can simply plug it in to your manifold block.
Use this adapter fitting to create a connection point on your appliance for a quick-disconnect hose. 1/4" Male NPT fitting threads onto propane hoses or directly onto appliances for simple hookups without hand tightening.
Replace the broken catch on your storage doors with strong and simple magnets. Includes two magnets per set and mounting hardware. A great upgrade if you're done fumbling around with those manual, hook-style catches.