New Arrivals

Install or remove your oil or grease cap with this aluminum alloy wrench. Long, angled handles let you apply more force to get stuck caps unstuck. Impact points on ends make it easy to whack with a mallet. Fits 2-1/4" and 2-1/2" hex caps.

• Accessories and Parts
• Trailer Bearings Races Seals Caps
• Tools
• Wrench
• Valcrum

Replaces the lens, foam gasket, lens retainer, gasket, magnetic vent plug, and torx screws on your universal oil bath/grease hub cap. Works with all Valcrum combination oil bath/grease caps manufactured 2020 and later.

• Accessories and Parts
• Trailer Bearings Races Seals Caps
• Seals and Gaskets
• Plugs
• Lens
• Valcrum

These adapters relocate the internal anchor points of your Scout camper so you can use it with the TorkLift ApexAnchors.

• Accessories and Parts
• Truck Camper Tie Downs
• Hardware
• Anchors
• TorkLift

If you've dealt with turnbuckles that rattle, rust, or need constant adjustment, you're not alone. These stay quiet, hold tension, and work with ApexAnchors to keep your camper steady and secure without the constant second-guessing.

• Accessories and Parts
• Truck Camper Tie Downs
• Turnbuckles
• Quick Disconnect
• Locks Not Included
• Stainless Steel
• TorkLift

1 Hitch ball for 2 towing needs. This chrome-plated steel dual ball gives you both 2" and 2-5/16" sizes, making it easy to switch between trailers. Designed for use with Trimax adjustable, aluminum hitches (Razor XTR and AL-RP Series).

• Accessories and Parts
• Trailer Hitch Ball Mount
• Drop Hitch
• Balls
• Dual Ball
• 2 Inch Ball
• 2-5/16 Inch Ball
• Trimax Locks

Tired of your jack sinking or your trailer feeling unsteady? This footpad adds a wide base for solid support on gravel, grass, or dirt. Fits jacks with 2-1/4" outer diameter tubing and 2" inner tubing for a steady setup every time you park.

• Accessories and Parts
• Trailer Jack
• Camper Jacks
• Jack Foot
• Ultra-Fab Products

Add this LED third brake light to your Outlander soft truck topper to make your truck more visible to vehicles behind you. Connects to a 12-volt power source and mounts on the rear bow of your truck topper. Water-resistant seal prevents damage.

• Accessories and Parts
• Truck Topper
• Lights
• Outlander

Replaces the dual pin assembly from your 180 Hitch 2-ball mount or your Weigh Safe 2-ball mount with a built-in scale. Secures the ball platform to the shank. Includes 2 cotter pins.

• Accessories and Parts
• Drop Hitch
• Trailer Hitch Ball Mount
• Pins and Clips
• Weigh Safe

Replaces the rubber cover on your Weigh Safe adjustable coupler lock. Keyhole cover keeps moisture and debris out of lock cylinder.

• Accessories and Parts
• Trailer Tongue Lock
• Dust Caps
• Weigh Safe

Only for use with 8.5K and 12.5K systems, this shank offers up to a 10" drop and an 11" rise for your Weigh Safe True Tow weight distribution hitch. Measures 11" long and fits 2" x 2" receivers.

• Accessories and Parts
• Weight Distribution Hitch
• Shanks
• 1100 lbs TW
• Fits 2 Inch Hitch
• Square - 10 Inch Drop
• Square - 11 Inch Rise
• Weigh Safe

When you need a quick fix for the wrong size hitch ball, reach for the Weigh Safe clamshell adapter. You can effortlessly convert your 2" hitch ball to a 2-5/16" hitch ball. Fits most standard 2" hitch balls.

• Accessories and Parts
• Trailer Hitch Ball Mount
• Drop Hitch
• Trailer Hitch Ball
• Adapters
• Ball Adapter
• Weigh Safe

Only for use with 8.5K and 12.5K systems, this shank offers up to an 8" drop and an 8-1/2" rise for your Weigh Safe True Tow weight distribution hitch. Measures 11" long and fits 2-1/2" x 2-1/2" receivers.

• Accessories and Parts
• Weight Distribution Hitch
• Shanks
• 1100 lbs TW
• Fits 2-1/2 Inch Hitch
• Square - 8 Inch Drop
• Square - 8 Inch Rise
• Weigh Safe

This replacement retaining pin attaches the dual-sided hitch ball to the platform of your 180 Hitch ball mount. The pin slides into the back of the platform and through the middle of the dual-sided hitch ball.

• Accessories and Parts
• Drop Hitch
• Trailer Hitch Ball Mount
• Pins and Clips
• Weigh Safe

Dirty hitch? Clean it up with the Weigh Safe polishing kit. Includes everything you need to make that hitch look almost new again - microfiber rag, polishing fiber, replacement stickers, disposble gloves, and polishing cleaner.

• Accessories and Parts
• Trailer Hitch Ball Mount
• Polishing Kit
• Weigh Safe

Mount your True Tow hitch on your trailer's 8" tall frame with this bracket kit. Also perfect for Jayco trailers with the coupler mounted underneath the frame. Mounting hardware included.

• Accessories and Parts
• Weight Distribution Hitch
• Frame Bracket
• Weigh Safe

This ball mount platform replaces the one from your Weigh Safe 180 ball mount for your 2", 2-1/2", or 3" hitch. Platform slides along the shank so that you can match the height of your trailer. Replacement balls sold seperately.

• Accessories and Parts
• Trailer Hitch Ball Mount
• Drop Hitch
• Ball Platform
• Weigh Safe

Replace the gauge on your steel Weigh Safe 2-1/2" hitch with this kit.

• Accessories and Parts
• Trailer Hitch Ball Mount
• Drop Hitch
• Scale
• Weigh Safe

Keep your stuff safe and secure! This hitch lock set includes a locking hitch pin, an adjustable coupler latch lock, and a padlock. Works with all Weigh Safe 2", 2-1/2", and 3" ball mounts with a 5/8" pin hole.

• Accessories and Parts
• Trailer Hitch Ball Mount
• Drop Hitch
• Locks
• Locking Pin
• Weigh Safe

Replaces the locking dual pin assembly from your 180 Hitch 2-ball mount or your Weigh Safe 2-ball mount with a built-in scale. Secures the ball platform to the shank. Includes 2 keys.

• Accessories and Parts
• Trailer Hitch Ball Mount
• Drop Hitch
• Pins and Clips
• Weigh Safe

Replace or upgrade your dual-sided tow ball. Remove the tow ball pin, take out your old ball, and drop this new one into place. Now you can tow up to 7,500 lbs with the 1-7/8" ball or up to 8,000 lbs with the 2" ball.

• Accessories and Parts
• Trailer Hitch Ball Mount
• Drop Hitch
• Balls
• Dual Ball
• 2 Inch Ball
• 1-7/8 Inch Ball
• Weigh Safe

Kick mud to the curb with this lightweight, no-nonsense shoe scraper. It clears your soles fast, won't hold grime, and packs away clean in the included carry case - perfect for campsites, job sites, and everything in between.

• Accessories and Parts
• RV Steps
• Boot Brush
• Weigh Safe

Keep your GMC or Chevy MultiPro tailgate from hitting your Weigh Safe hitch with this durable, rubber bump stop. Fits snugly on your hitch to protect tailgate from dents and paint from scratches when folded down.

• Accessories and Parts
• Trailer Hitch Ball Mount
• Drop Hitch
• Rubber Stops
• Weigh Safe

Only for use with 8.5K and 12.5K systems, this shank offers up to a 4" drop and a 5" rise for your Weigh Safe True Tow weight distribution hitch. Measures 11" long and fits 2-1/2" x 2-1/2" receivers.

• Accessories and Parts
• Weight Distribution Hitch
• Shanks
• 1100 lbs TW
• Fits 2-1/2 Inch Hitch
• Square - 4 Inch Drop
• Square - 5 Inch Rise
• Weigh Safe

Replaces the 8 oz stainless steel pet bowl for your WeatherTech pet feeding system. Great for if you want to have another bowl while the other is in the dishwasher.

• Accessories and Parts
• Pet Supplies
• Pet Bowls
• WeatherTech