New Arrivals

This adapter attaches to the factory, underbed 5th-wheel prep package receivers in your vehicle so that you can use your PullRite SuperGlide hitch that normally attaches to industry-standard rails (2700 or 2900).

• Accessories and Parts
• 5th Wheel Hitch Rails
• Adapters
• Rail Adapter
• Custom
• Pullrite

Use this plate to keep your trailer's king pin from rotating in your PullRite SuperGlide hitch. A capture plate is required for you to tow with the SuperGlide. This plate fits Reese 5th Airborne pin boxes with skid plates that are 12" wide.

• Accessories and Parts
• 5th Wheel Pin Box
• Locking Plate
• 5th Airborne Pin Box
• Pullrite

Use this plate to keep your trailer's king pin from rotating in your PullRite SuperGlide hitch. A capture plate is required for you to tow with the SuperGlide. This plate fits Fabex pin boxes with skid plates that are 12" wide.

• Accessories and Parts
• 5th Wheel Pin Box
• Locking Plate
• Fabex Pin Box
• Pullrite

Tow your trailer with confidence using this PullRite capture plate, designed for Lippert Helux pin boxes. It locks the king pin to ensure smooth tracking with SuperGlide hitches, preventing unwanted rotation and enhancing towing safety.

• Accessories and Parts
• 5th Wheel Pin Box
• Locking Plate
• Lippert Helux
• Pullrite

This adapter attaches to the factory, underbed fifth wheel towing prep package receivers in your vehicle. The base provides the attachment point for your 5th-wheel hitch with industry standard tabbed feet. Modular design allows for easy removal.

• Accessories and Parts
• 5th Wheel Hitch Rails
• Adapters
• Rail Adapter
• Custom
• Pullrite

Replaces the base for your PullRite ISRX Super or SuperLite 5th-wheel hitch for industry-standard rails. Rated for 24,000 lbs gross towing weight.

• Accessories and Parts
• 5th Wheel Hitch
• Base
• Pullrite

Use this plate to keep your trailer's king pin from rotating in your PullRite SuperGlide hitch. A capture plate is required to tow with the SuperGlide. This plate fits cushioned MORryde pin boxes with skid plates that are 13-1/2" wide.

• Accessories and Parts
• 5th Wheel Pin Box
• Locking Plate
• MORryde Pin Box
• Pullrite

Bolt this capture plate onto your Lippert 0719 pin box to prevent the king pin from rotating inside your PullRite fifth-wheel hitch.

• Accessories and Parts
• 5th Wheel Pin Box
• Locking Plate
• Lippert Pin Box
• Pullrite

Install this wedge on your Lippert Turning Point, Sidewinder, or MORryde Orbital 5th wheel pin box to prevent the king pin from rotating in your Pullrite Super 5th wheel hitch.

• Accessories and Parts
• 5th Wheel Pin Box
• Wedges
• Lippert Turning Point
• Pullrite

Take control of every turn with the PullRite SuperGlide Capture Plate! Built for 12-1/2" MOR/ryde pin boxes, it locks in a secure hitch connection, smooth auto sliding & stress-free towing. Durable, easy to install & ready for the long haul.

• Accessories and Parts
• 5th Wheel Pin Box
• Locking Plate
• MORryde Pin Box
• Pullrite

Use this plate to keep your trailer's king pin from rotating in your PullRite SuperGlide hitch. A capture plate is required for you to tow with the SuperGlide. This plate fits Lippert 1621 pin boxes with skid plates that are 12-3/4" wide.

• Accessories and Parts
• 5th Wheel Pin Box
• Locking Plate
• Trailair Pin Box
• Pullrite

Protect the finish on your hitch and truck bed with these lube plates. Designed for the #2600 SuperLite 20K and #3900 Super 5th 24K hitches, these durable nylon plates reduce friction and eliminate the need for messy lubricants.

• Accessories and Parts
• 5th Wheel Hitch
• Plates
• Lube Plate
• Pullrite

Use this plate to keep your trailer's king pin from rotating in your PullRite SuperGlide hitch. A capture plate is required for you to tow with the SuperGlide. This plate fits Flex Air pin boxes with skid plates that are 13-1/4" wide.

• Accessories and Parts
• 5th Wheel Pin Box
• Locking Plate
• Trailair Pin Box
• Pullrite

Mount your Traditional Series PullRite SuperGlide hitch to industry standard base rails or gooseneck mounts using this adapter kit. Works with 4100, 4400, and discontinued 3300 models. Base rails sold separately.

• Accessories and Parts
• 5th Wheel Hitch Rails
• Adapters
• Rail Adapter
• Pullrite

Replaces the latch for your Pace Edwards JackRabbit hard tonneau cover (311-JRC0303).

• Accessories and Parts
• Tonneau Cover
• Latches
• Pace Edwards JackRabbit
• Pace Edwards

Square tube welds onto your trailer. Works with 4" width inner tubes (sold separately). Pairs perfectly with the eZ-Latch gooseneck coupler DM43KV (sold separately).

• Accessories and Parts
• Gooseneck Coupler
• Outer Tube
• Demco

Replaces the left-side drop axle wheel carrier assembly for your Demco Kar Kaddy 3 (DM9713046) or Kar Kaddy SS (DM9713045 or 9713049) tow dolly.

• Accessories and Parts
• Trailers
• Tow Dolly Parts
• Wheel Carriers
• Demco

Use your Mad-Ramps pivoting ramp setup with a flatbed truck. This US-made kit lets you install the Mad-Ramps system for 2-1/2" hitches on most flatbed and utility-box trucks.

• Accessories and Parts
• ATV Ramps
• Truck Ramps
• Flatbed Kit
• Mad-Ramps

If you only have a couple steps up outside your RV door, this shorter telescoping handrail will be a better size. The 48" rail folds flat against your RV with a sleek, low-profile look that won't obstruct the door.

• Accessories and Parts
• RV Steps
• Grab Handles and Handrails
• Telescoping Handrail
• MORryde

Replaces the tread cover for the standard, lower-step on your Gen 2 StepAbove RV steps with 23-1/2" wide treads.

• Accessories and Parts
• RV Steps
• Grip Tape
• MORryde

Gives you a dedicated spot - other than your camper basement - to stow your weight distribution hitch and spring bars. Easy-to-install, bolt-on bracket secures your gear and frees up space.

• Accessories and Parts
• Weight Distribution Hitch
• Covers and Storage
• Brackets
• MORryde

Get some added traction with these slip-resistant and marine-grade step treads. These step treads are designed specifically for the MORryde Gen II StepAbove 2-step with 19-1/2" treads. Applies quickly and easily with adhesive backing.

• Accessories and Parts
• RV Steps
• Grip Tape
• MORryde

Replaces the #03 rubber shear spring on MORryde's rubber pin boxes for trailers under 11,500 GVWR. Helps absorb and dampen road shock, vibration, and reduces chucking. Installs on the skid pad with your existing hardware.

• Accessories and Parts
• 5th Wheel Pin Box
• Shear Springs
• MORryde

Pop these durable polycarbonate spacers onto the pivot bar of your Mad-Ramps setup (MR54FR) to keep the ramps from shifting side to side.

• Accessories and Parts
• Truck Ramps
• ATV Ramps
• Spacers
• Mad-Ramps