Replace the lost or damaged cable anchor in your Demco Stay-in-Play DUO or Air Force One system. Includes set screw to secure the cable in place and restore your systems function.
Replaces a worn or missing ramp bushing on your Demco Kar Kaddy SS tow dolly. This bushing ensures proper spacing, allowing the ramp to tilt up for storage and secure in lowered position for loading.
Round tube welds onto your trailer. Works with 4" diameter inner tubes (sold separately). Pairs perfectly with the eZ-Latch gooseneck coupler DM73KV (sold separately).
If you're tired of your trailer brakes locking when you back up, this hand activated reverse lockout stops the surge actuator from applying the brakes. It installs directly on any Demco DA75 actuator with no electrical hookup required.
Replaces the clear white lens on your Stage Series rock light. Can also be used as an alternative to a diffused white lens, or for other colors so go wild! Lens snaps in place for easy installation.
Replaces the diffused green lens on your Stage Series rock light. Can also be used as a replacement for other colors so go wild! Lens snaps in place for easy installation.
Replaces the clear red lens on your Stage Series rock light. Can also be used as an alternative to a diffused red lens, or for other colors so go wild! Lens snaps in place for easy installation.
Diode Dynamic's Stage Series hitch-mounted LED acts as a brake and running light, brightening your surroundings and increasing visibility for you and other drivers. Plug and play system installs and uninstalls quickly.
Replaces the clear blue lens on your Stage Series rock light. Can also be used as an alternative to a diffused blue lens, or for other colors so go wild! Lens snaps in place for easy installation.
Replaces the diffused blue lens on your Stage Series rock light. Can also be used as a replacement for other colors so go wild! Lens snaps in place for easy installation.
Replaces the clear amber lens on your Stage Series rock light. Can also be used as an alternative to a diffused amber lens, or for other colors so go wild! Lens snaps in place for easy installation.
All it takes is one worn brake to throw your trailer off. Replacing a single ABS brake assembly restores smoother stopping and steadier tracking, so you stay in control on steep grades, in crosswinds, and during sudden traffic stops.
Replace a cracked or faded switch bezel on your Power Gear leveling system with this black/silver trim piece. Snaps in easily for a quick cosmetic fix. Works on select Power Gear RV leveling system control panels.
Replace your RV's awning roller and fabric with a heavy-duty assembly. Fits Solera 20' power and hybrid awnings extending 8'. Includes LED strip sleeve. Easier than replacing fabric alone.
Replace your RV's old or damaged awning roller and fabric with this heavy-duty assembly. Fits Edge and 2000 series 8' power awnings with a built-in LED strip. Installs more easily than replacing just the fabric.
Restore push-button power to your Solera awning with this replacement arm kit featuring matching 69 inch Regal arms, flat-back mounts, top-routed wiring, and a black 12-volt rocker switch - just swap the arms and keep your current fabric and roller.
A damaged harness can make your RV's leveling system unreliable. This 25' replacement restores electrical connections, helping your jacks work smoothly. Designed for Lippert Level-Up systems, it's a simple fix to get you back to camping.
Restore your Solera Edge slide-out awning with this full idler side replacement kit. Designed for all Solera Edge toppers, it includes black-finished hardware and wire support components for a secure, like-new installation.
Worn brake hoses reduce stopping power. This DOT-approved Kodiak hose seals tight for leak-proof braking and resists rust for long-lasting performance. Dead swivel ends prevent twisting during installation. Works with any 3/16" brake lines.
Replace the spacer on your Kodiak K71-2R-11-10D-DDDD disc brake kit. Designed for 11" rotors with an 8 on 6-1/2" bolt pattern and 5/8" studs, it restores fit and function for your 10,000-lb axle, keeping disc brakes working smoothly.
Worn brake hoses reduce stopping power. This DOT-approved Kodiak hose seals tight for leak-proof braking and resists rust for long-lasting performance. Dead swivel ends prevent twisting during installation. Works with any 3/16" brake lines.
Caliper-mounting bracket is designed for use with 11.6" hub-and-rotor assemblies that have an 8 on 6-1/2 bolt pattern and 5/8" wheel bolts. Works with dually applications and mounts on 7-bolt, 10,000-lb Dexter brake flanges.