New RV Product Arrivals

You're checking the corner of your slide-out and spot the arrow-shaped trim piece missing. The joint's exposed, and water's getting in. This replacement screws on to cover the point and finish the corner with a matched fit.

• RV Slide Out Parts
• Caps and Covers
• Straight Arrow Corner
• Bolt-On
• Black
• B and B Molders

You're up on the ladder checking your slide-out and notice the corner is exposed. The square cover is gone, and now water's got a direct shot into the seam. This replacement squares it off, seals the joint, and blends right in with the trim.

• RV Slide Out Parts
• Caps and Covers
• Square Corner
• Bolt-On
• Gray
• B and B Molders

You can't stop the rain, but you can control where it goes. These gutter spouts guide water away from your rig so it doesn't leave streaks down the side or puddles by the door. A small fix that makes a clear difference when the weather turns.

• RV Trim
• Gutter Parts
• Beige
• B and B Molders

You're checking the base of the slide-out after a long weekend and notice the left-hand trim cap is gone. The open end's collecting dirt and giving water a way in. This replacement screws into place to cover the opening and matches your trim.

• RV Trim
• Plastic Molding
• White
• B and B Molders

You're up on the ladder checking your slide-out and notice the corner is exposed. The square cover is gone, and now water's got a direct shot into the seam. This replacement squares it off, seals the joint, and blends right in with the trim.

• RV Slide Out Parts
• Caps and Covers
• Square Corner
• Bolt-On
• Black
• B and B Molders

Tucked into the wall and sealed up tight, this docking station keeps your hookups organized and out of sight. Flip the door, hook up, and you'refree to kick back - your campsite setup just got way easier.

• RV Water Inlets
• City Fill Inlet
• Recessed Mount
• 3-3/4 Inch Deep
• Plastic
• Black
• B and B Molders

The dual jaw on this hitch offers a secure connection with 360-degree jaw-to-king-pin contact. Durable polyurethane bushings limit rattle and vibration. Base adjusts for ideal vertical and fore/aft positioning. Custom installation kit included.

• 5th Wheel Hitch
• Fixed Fifth Wheel
• Above Bed Rails
• 4500 lbs Vertical Load
• 18000 lbs GTW
• Double Pivot
• 16 - 19 Inch Tall
• B and W

The dual jaw on this 5th-wheel hitch offers a secure connection with 360-degree jaw-to-king-pin contact. Durable polyurethane bushings limit rattle and vibration. Base adjusts for ideal vertical and fore/aft positioning. Rails sold separately.

• 5th Wheel Hitch
• Fixed Fifth Wheel
• Above Bed Rails
• 5000 lbs Vertical Load
• 20000 lbs GTW
• Double Pivot
• 16 - 19 Inch Tall
• B and W

This trailer jack block makes leveling and stabilizing your RV or trailer simple. No more wrestling with wobbly jacks or stacking sketchy wood blocks. It's lightweight, sturdy, and takes the hassle out of setting up your campsite.

• Trailer Jack
• Camper Jacks
• Pop Up Camper
• 5th Wheel Camper
• RV Motorhome
• Teardrop Camper
• Travel Trailer
• Leveling Blocks
• Plastic
• 5001 - 6000 lbs
• Andersen

Level your trailer in minutes with no stacking or guesswork - just drive on. Adjusts from 1/2" to 4" and supports up to 30,000 lbs. Includes 2 levelers, 2 chocks, and a carry bag.

• Wheel Chocks
• RV Leveling Blocks
• Wheel Chock
• RV
• Trailer
• Plastic
• Pair of Chocks
• Red
• Andersen

You're walking up to the front of your 5th wheel and spot the trim corner exposed. The cover is gone, and now the seam is open to moisture and road spray. This replacement screws into place to finish off the edge and match your front-end trim.

• RV Trim
• Plastic Molding
• Black
• B and B Molders

You're replacing a sun-faded, road-battered, barely sealed access hatch that's been holding on by a thread since your last trip. You pull it off, line up the new one, and it fits. Like it was made for your rig from the start. Because it was.

• RV Access Doors
• Multi-Purpose Hatch
• Square
• Locking
• 8W x 8-1/2T Inch
• 6-3/4W x 6-15/16T Inch Cutout
• Black
• B and B Molders

You're checking the base of the slide-out after a long weekend and notice the left-hand trim cap is gone. The open end's collecting dirt and giving water a way in. This replacement screws into place to cover the opening and matches your trim.

• RV Trim
• Plastic Molding
• Black
• B and B Molders

You're walking around your rig and notice the trim ends suddenly on the left side. No cap, just an exposed edge catching dirt and water. This replacement seals it up and finishes the run so it actually looks like it came that way.

• RV Slide Out Parts
• Caps and Covers
• End Cap
• Bolt-On
• Black
• B and B Molders

You're replacing a sun-faded, road-battered, barely sealed access hatch that's been holding on by a thread since your last trip. You pull it off, line up the new one, and it fits. Like it was made for your rig from the start. Because it was.

• RV Access Doors
• Multi-Purpose Hatch
• Square
• Locking
• 8W x 8-1/2T Inch
• 6-5/16W x 6-3/4T Inch Cutout
• Black
• B and B Molders

You're checking the base of the slide-out after a long weekend and notice the right-hand trim cap is gone. The open end is collecting dirt and giving water a way in. This replacement screws into place to cover the opening and matches your trim.

• RV Trim
• Plastic Molding
• Black
• B and B Molders

You're up on the ladder checking your slide-out and notice the corner is exposed. The square cover is gone, and now water's got a direct shot into the seam. This replacement squares it off, seals the joint, and blends right in with the trim.

• RV Slide Out Parts
• Caps and Covers
• Square Corner
• Bolt-On
• White
• B and B Molders

The rain starts to fall, and you don't even flinch. Thats how it should be. This little splice makes sure the flow keeps going. No drips from the seams or streaks down the side. Just water headed where it's supposed to go.

• RV Trim
• Gutter Parts
• Black
• B and B Molders

You're walking around your rig and spot the end of the trim line sticking out. The cap is missing, leaving the edge exposed to water and road spray. This return-style end cap with a molded step finishes off the run and blends in with your trim.

• RV Slide Out Parts
• Caps and Covers
• End Cap
• Bolt-On
• Tan
• B and B Molders

You're checking the inside corner of the slide-out and spot the trim joint exposed. The cover's missing, and now there's a gap catching dust and grime. This replacement covers it up and blends right in with the trim.

• RV Slide Out Parts
• Caps and Covers
• Inside Corner
• Bolt-On
• Black
• B and B Molders

You're up on the ladder checking your slide-out and notice the corner is exposed. The square cover is gone, and now water's got a direct shot into the seam. This replacement squares it off, seals the joint, and blends right in with the trim.

• RV Slide Out Parts
• Caps and Covers
• Square Corner
• Bolt-On
• Tan
• B and B Molders

You can't stop the rain, but you can control where it goes. These gutter spouts guide water away from your rig so it doesn't leave streaks down the side or puddles by the door. A small fix that makes a clear difference when the weather turns.

• RV Trim
• Gutter Parts
• Beige
• B and B Molders

Tucked into the wall and sealed up tight, this docking station keeps your hookups organized and out of sight. Flip the door, hook up, and you'refree to kick back - your campsite setup just got way easier.

• RV Water Inlets
• City Fill Inlet
• Recessed Mount
• 3-3/4 Inch Deep
• Plastic
• Black
• B and B Molders

You're inside the RV and spot the floor trim near the wall is cracked or missing. This replacement piece covers it up and blends right in with the trim while protecting the edge.

• RV Trim
• Plastic Molding
• Beige
• B and B Molders