Part Numbers: TLC2225,TLC3221
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.
Features:
If you're looking for the best tie-downs for your camper, frame-mounted is the way to go. The frame is the most solid part of your entire vehicle, so it just makes sense to attach your camper to something that's not going to warp, bend, or twist. Even more importantly, the camper's center of gravity will sit lower and its weight will be spread across the entire bed. This avoids a top-heavy load perched on top of your bed rails that's liable to sway and get pushed around by crosswinds. The camper's not going to shift or slide around while you drive; it's going to stay put, and your truck is going to handle just like it does without a camper.
Quick Tip: If you have a plastic or spray-in bed liner, it's important that you use a rubber mat under the camper to eliminate any sliding or bouncing.
Frame-mounted tie-downs are also a great pick for preserving your truck's good looks. The brackets install on the frame, tucked nearly flush with the underside of the vehicle. Remove the arms from the brackets when you're not hauling your camper, and the brackets will be barely visible.
Completely custom to your vehicle, the tie-downs attach to exisiting holes in your frame so that there's little to no drilling and no need for any modifications. Because they're custom, you'll want to use our in-house application guide to make sure you get the exact right model. The tie-downs you need might be different depending on what type of hitch or other accessories you have.
Once the tie-downs are installed, use a set of turnbuckles (sold separately) to secure the camper to the tie-downs. The shank on each arm has 2 pin holes so you can choose how far out they extend, that way the turnbuckles can reach the anchors on your camper without making contact with your truck. Tighten the turnbuckles to the correct level of tension (not too tight!).
Make sure the anchor points are offset from the tie-downs instead of lined up with them so that they will hold your camper from multiple angles. This is important for keeping your camper from shifting. Two holes in the attachment plate of the tie-downs let you find the best angle for you camper anchors.
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.
Features:
If you're looking for the best tie-downs for your camper, frame-mounted is the way to go. The frame is the most solid part of your entire vehicle, so it just makes sense to attach your camper to something that's not going to warp, bend, or twist. Even more importantly, the camper's center of gravity will sit lower and its weight will be spread across the entire bed. This avoids a top-heavy load perched on top of your bed rails that's liable to sway and get pushed around by crosswinds. The camper's not going to shift or slide around while you drive; it's going to stay put, and your truck is going to handle just like it does without a camper.
Quick Tip: If you have a plastic or spray-in bed liner, it's important that you use a rubber mat under the camper to eliminate any sliding or bouncing.
Frame-mounted tie-downs are also a great pick for preserving your truck's good looks. The brackets install on the frame, tucked nearly flush with the underside of the vehicle. Remove the arms from the brackets when you're not hauling your camper, and the brackets will be barely visible.
Completely custom to your vehicle, the tie-downs attach to exisiting holes in your frame so that there's little to no drilling and no need for any modifications. Because they're custom, you'll want to use our in-house application guide to make sure you get the exact right model. The tie-downs you need might be different depending on what type of hitch or other accessories you have.
Once the tie-downs are installed, use a set of turnbuckles (sold separately) to secure the camper to the tie-downs. The shank on each arm has 2 pin holes so you can choose how far out they extend, that way the turnbuckles can reach the anchors on your camper without making contact with your truck. Tighten the turnbuckles to the correct level of tension (not too tight!).
Make sure the anchor points are offset from the tie-downs instead of lined up with them so that they will hold your camper from multiple angles. This is important for keeping your camper from shifting. Two holes in the attachment plate of the tie-downs let you find the best angle for you camper anchors.
Average Customer Rating: 4.7 out of 5 stars (377 Customer Reviews)
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there. Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.Front mounts already had signs of use bag of hardware open all over box. Stickers saying front already put on.
Am a repeat customer to etrailer.com. They have always been pretty good. this last order was the best yet. ordered at about 5pm, picked and shipped out the door by 6:30. Arrived in 2 days halfway across the country with standard free shipping on some Torklift products. Impressive.
These tie downs work great! They were relatively easy to install as well, all of the hardware and bolt feeding tools were supplied with the product.
The good thing about these tie downs, is that they are connected to the truck frame and not the truck bed or box, (which is mounted to the frame with rubber mounts) giving too much flexing while hauling a camper.
Same as the front, easy to install, good instructions and bolt feed tool included. Ties the camper to the frame of the truck instead of the rubber mounted bed or box.
Solid product. Installation easy with instructions
Very happy with the Torklift tiedowns. They are very well made and sturdy.
Installation was pretty straitforward but I reccomend a 25 year old helper if you are 60+ like myself. Its doable, but having someone fetching tools and hardware and helping hold them in place made it go pretty well.
These TorkLift tie downs are the best. Very strong and sturdy. I had a set on my last PU. They hold the camper in place very well. I installed these on my 2021 Silverado 2500HD
These TorkLift tie downs are the best. Very strong and sturdy. I had a set on my last PU. They hold the camper in place very well. I installed these on my 2021 Silverado 2500HD
It was a pretty nice set up. One of the arms that slide in didn’t have the holes drilled all the way through. One of the bolts on the back mounts needed to be about a quarter inch longer. Other than that everything worked out well. Nice design.
I bought the set,front and rear Torq Lift camper tie downs. First is that, in my opinion, etrailer is a #1 supplier. From time of order to doorstep 3 days.
Definitely a buy once, cry once situation. Tork Lift had a packing error on the bag of fasteners, I let trailer know and right stuff has been received. The tie-downs are first rate. Extremely well designed and installation was a snap. The videos on etrailer helped a number of times when I couldn't make sense of the pictures or explanation in the installation manual.
Overall a very good experience, I got my money's worth.
Great fit. Easy to install and awesome customer service.
Even with one set that B.O. (backorder), I still received it within a week.
Truly a reliable company.
From Quebec City, Canada
Heavy duty tie downs. Very well made. I found it impossible to get two of the star washers in place on the bolts that go through the “plate” sent with the kit. Simply not enough room. Also two lock washers were to small. I had some in the shop. This being said I was still very satisfied with fit and function.
Keep in mind the parameters of the application these may be different on another vehicle. Camper is a Northern lite 9-6. Vehicle Chevy 3500 LB SRW 4x4. Post install, in my opinion. I’d feel my comfortable if the ‘FastGun’ tie downs were facing opposing directions. Currently attaching to the designated anchor points all four FG’s angle from the TorkFit anchor point BACK towards the NL camper’s anchor points. This positively prevents the 3600 LB. camper from rearward movement. However FOWARD movement can and has occurred. After a necessary sudden braking event I checked my clearances and discovered that forward movement did occur. About, one inch. My NL slid far enough forward that contact was made between the vehicle and the camper. Realignment was necessary. From an Engineers perspective: the best anchorage would be achieved with the anchoring devices (FastGuns, in my case) installed in opposing directions. In the future I will be placing blocks between the camper and the front of the truck bed to eliminate any forward movement.
The TorkLift camper tie downs you delivered were easy to instal and certainly served the application intended. The best part of the purchase was the way that you followed up to make sure that I had received the order and that they fit as they were supposed too. And now a year later you have contacted me again, to ensure that I am pleased with my purchase. GREAT product, and Awesome Service.
Much appreciated
Felt like i was abused when i paid for the tie downs but then i was really happy with the final product so i guess i got screwed and i liked it. Honestly there's not allot of options and these are heavy duty and well thought out so once you bite the bullet you end up with a good overpriced product.
Very easy to install I feel very secure knowing our camper is attached to the truck frame.
I bought these for my 2020 Silverado 2500HD, and the fit was excellent. The instructions imply that the rear exhaust hanger may need to be repositioned for installation, I did not find this to be the case. I advise any users to read and understand the instructions prior to installation, but with that in mind, installation only took a little over an hour and a half. The fit was great and the inserts fit closely, but without contacting the body panels. Very covert! A piece missed in the instructions is that you will need to remove the spare tire safety cable clipping bracket on the drivers side permanently. There is a location on the tie down bracket to clip the cable back to the truck.
I like the product but you sent me items that are supposed to be brand new and they’re all beat up like someone used and returned. They should be perfect as far as no chips and paint is concerned but it’s the opposite. Bad on your company charging me full price for these beat up items. I’ll be seeking a refund or partial refund
Great product, easy install only thing I would change is a new bed bolt should be included that is a bit longer. Should hold the sxs and sxs rack nicely in place now.
one of the inserts for the bottom was not drilled on both sides. I have a drill press and can drill the holes. Otherwise the installation went very well.
Great product. Easy to install and super solid to secure our truck camper. And as always, etrailer is awesome to work with. Super fast shipping and when I need to call with questions every staff person I’ve dealt with have been awesome. A true pleasure to work with.
Excellent design and product. Pretty much the only company out there with frame mounted tie downs. This is my second set I have purchased over the years. The only area for improvement is packaging. It’s 2021 and you’re wrapping powder coated steel in loose paper for shipping?? The brackets have ding marks and scratches and powder coat chips. Mix in some internal cardboard, bubble wrap or styrofoam.
Worked out great, fast shipping made it possible to install today. So a good experience I have placed another order for the Happijack quick turnbuckles too.
Easy install. A more secured method to hold down our camper.
Pros:
1. Excellent installation process. No drilling, No welding, No hammering, and no swearing.
2. They tuck up tight; out of site (almost) when the camper is off the truck.
3. They attach to the frame. This makes for a very solid ride experience.
Cons: NONE
Ask the Experts about this Camper Tie-Downs
Do you have a question about this Camper Tie-Downs?
TorkLift Accessories
Fit to this rack on your 2022 Chevrolet Silverado 3500
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Chevrolet Silverado 3500 Accessories
Jerome
10/23/2023
worked well. little pricey but they work