Reese 5th Wheel Trailer Hitch w/ Round Tube Slider - Dual Jaw - 16,000 lbs
Reese Elite Series Underbed Rail Adapter for Standard 5th Wheel Trailer Hitches - 20,000 lbs
Part Numbers: RP30075,RP30156
Retail:$2,157.83
Our Price: $1,311.50
You Save: $846.33
This item qualifies for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Reese 5th Wheel Trailer Hitch w/ Round Tube Slider - Dual Jaw - 16,000 lbs
part number: RP30075
Fifth-wheel trailer hitch provides excellent jaw-to-king-pin contact with a 2-jaw latching system. Non-binding, round-tube slider helps to eliminate clearance concerns during slow-speed turns. Rails and installation kit sold separately.
Features:
- 2-Jaw locking system provides more jaw-to-king-pin contact than slide-bar models
- Less rattle
- Greater security
- Round-tube slider provides clearance required for your short-bed pickup to turn safely at slow speeds
- Prevents trailer from hitting the cab of your pickup during sharp, slow-speed turns
- Inhibits binding and provides smooth operation
- 4-Way pivoting head eases hookup on unlevel ground
- 3" Height adjustment
- Wide stance offers excellent stability
- Black powder coat finish resists corrosion
- Locking handle has cushioned grip
- Above-bed rails and mounting kit sold separately
- Fits Curt, Valley, Draw-Tite, Hidden-Hitch and Reese base rails
- Cut installation time in half by using a vehicle-specific bracket kit instead of the universal kit
Specs:
- Gross towing weight: 16,000 lbs
- Vertical load limit: 4,000 lbs
- Installed hitch height (including rails): 15" - 18"
- Travel: 11" front to back
- 5-Year limited warranty
Note: This fifth-wheel trailer hitch will not fit pickups with beds shorter than 6'. It also will not fit trucks with flareside/stepside bed. A minimum 13" extended trailer pin box is recommended. If using a slider, hitch will not adjust to lowest height setting.
Secure, 2-Piece Jaw
Unlike the more economical slide-bar models, the rounded, 2-piece jaw on this fifth-wheel trailer hitch inhibits rattle and movement by securely wrapping around your trailer's king pin, resulting in easier hookup and a safer, quieter ride.
Round-Tube Slider
Most often used on trucks with 6' beds, this roller helps to eliminate clearance problems during slow-speed turns. When you are towing a fifth-wheel trailer, your hitch must be situated on the cab side of your truck's rear axle. However, at slow speeds you can use a roller to slide the fifth-wheel hitch (and the trailer) toward your truck's tailgate and past the rear axle, creating enough space between the cab of your truck and the trailer to permit less-restricted turning.
30075 Reese Fifth Wheel Trailer Hitch with Round-Tube Slider - 16,000 lbs
California residents: click here
Reese Elite Series Underbed Rail Adapter for Standard 5th Wheel Trailer Hitches - 20,000 lbs
part number: RP30156
Adapt your Reese Elite Series under-bed base rails or Ford Super-Duty OEM towing prep package to work with any fifth-wheel trailer hitch that is rated at 15,000 lbs, 16,000 lbs or 20,000 lbs and attaches to standard, above-bed base rails.
Features:
- Converts your Reese Elite Series underbed installation rails (sold separately) to standard, above-bed 5th-wheel base rails
- Use a 5th-wheel trailer hitch that attaches to standard, above-bed rails
- Mounts to Elite Series rails via Power Puck system
- Unit drops into pucks and locks in place
- No drilling or welding required
- Black powder coated steel construction
Specs:
- Application: Reese Elite Series underbed base rails
- Also works with Ford Super-Duty factory-installed 5th-wheel towing prep package
- Accommodates: standard 5th-wheel trailer hitches with weight ratings of 15,000 lbs, 16,000 lbs, or 20,000 lbs
- Maximum capacity: 20,000 lbs
- Limited lifetime warranty
Whether you purchased the Elite Series underbed gooseneck hitch from Reese or bought the system as part of your new Ford Super-Duty, this adapter is perfect if you want to add your standard, non-Elite Series fifth-wheel hitch into the mix. Just mount the adapter in your underbed rails using the integrated pucks and lock it place. Now you have the standard, above-bed base rails needed to install your fifth-wheel hitch.
Note: Not compatible with the B&W Patriot slider (RVK3270) or certain sliders with 29" in slot spacing.
30156 Reese Elite Series Under-Bed Rail Kit Mounting Adapter for Attaching Standard Fifth-Wheel Trailer Hitches - Ford Super Duty
California residents: click here
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Reese 5th Wheel Trailer Hitch w/ Round Tube Slider - Dual Jaw - 16,000 lbs - RP30075
Reese Elite Series Underbed Rail Adapter for Standard 5th Wheel Trailer Hitches - 20,000 lbs - RP30156
Average Customer Rating: 4.7 out of 5 stars (566 Customer Reviews)
Fifth-wheel trailer hitch provides excellent jaw-to-king-pin contact with a 2-jaw latching system. Non-binding, round-tube slider helps to eliminate clearance concerns during slow-speed turns. Rails and installation kit sold separately. Adapt your Reese Elite Series under-bed base rails or Ford Super-Duty OEM towing prep package to work with any fifth-wheel trailer hitch that is rated at 15,000 lbs, 16,000 lbs or 20,000 lbs and attaches to standard, above-bed base rails.by: David O05/04/2023
Got here on time, some assembly fit perfectly. Satisfied Customer
by: Earl06/05/2019
Easy to remove and re-install.
The down side is the above bed box vs the rail system adds an extra height which elevates the nose of our 38 foot 5th wheel TH above level for hauling.
another point you should know if you do purchase this item make sure that you inspect the hardware carefully - really carefully !
the lock handles x 2 times had slag in the threads.
with the assistance of etrailer Reese sent me a replacement set which were worse than the first ones. Reese then paid me to get the threads cleaned out.
Earl
10/3/2022
new 2022 F250 truck is 2 inches lower than the 2018 F250. the trailer sits lower
by: Alan A.12/14/2015
2016 Ford F-350 Super Duty
We ordered this for our 2016 Ford F-350. The part comes unassembled, but with instructions that are easy to follow. I did have to adjust after assembly to fit our truck properly. ( The instructions state you may have to adjust ). If you get this I will recommend that you get the wrench, it would have made the adjustments easier. My hitch dropped right in the slots and pinned right in place. NOTE: the pins for the hitch are not included, so order them if you do not have them. The adapter does not rest on the bed, only on the FORD under bed adapter.
Alan A.
12/13/2016
Everything is working like it is supposed to. I do not see excessive rusting, the paint is holding well.
by: Lennon06/22/2019
2019 Ford F-250 Super Duty
This was the perfect fit for a 2019 F250. Our other truck was in the shop and we needed to haul the toy hauler with our new truck. etrailer customer service was great because we needed this next day shipping to complete our camping trip. The F250 is a short bed and no slider hitch but there was still plenty of clearance to the cab.
Lennon
6/23/2020
This product is great I use it in a 2019 and a 2016 Super Duty.
by: Rene10/08/2018
2019 Ford F-250 Super Duty
The adapter came as expected. It went together real fast. Keep everything loose when you insert same in the vehicle. You will have to adjust the four points, that is the nature of the beast. After the adjustment, the adapter fit fine. My Reese 16,000 hitch fit just fine.
Rene L.
10/9/2019
Used it on a month long RV trip. did just fine
by: Ron G04/01/2014
Thanks for the help with getting the adapter. This is how the job ended up with the under bed mount and adapter to the standard fifth wheel.
Ron G.
4/1/2015
The adapter has been working great. Gives me the flat floor I wanted and I didnt have to buy a different fifth wheel.
by: Wayne C09/29/2014
Installed slider hitch with quick removal base. Also fit's and works great.
Greg
7/20/2015
Do you have trouble getting the slider to latch with the camper attached?
by: Tim T.04/08/2016
Ford F-350 Super Duty
My new F350 didn't have the under bed 5th wheel mount and I didn't want to use the rails that bolt across the bed. I bought the Reese under bed parts, Reese adapter, new legs for the hitch and a bed mat and installed it myself. I drilled through the dimples in the bed, bolted in the under bed parts and everything lined up nice. Since I went from a short bed to a long bed I didn't need the slider legs so I replaced them with fixed legs. When the hitch and adapter are out of the bed, nothing is in the way on the floor. I like it.
by: Bernie 04/11/2024
very pleased with the product. went together with easy installation and works great. very knowledgeable people I worked with. Great job with all the help.
by: Bryan B.11/09/2014
2015 Ford F-350 Super Duty
Just installed the Reese Rail Adapter in my 2015 Ford F-350. It fits the factory 5th wheel prep package perfectly. The only issue I had was with fine tuning the latches (trial and error) but even so, this was a breeze to install (15-20 minutes). As always the shipping is FAST! I had the kit at my door two days after ordering.
by: Chris01/01/2018
2012 Ford F-250 and F-350 Super Duty
Great product, great price. Easy to assemble, and fit right into my factory Ford puck system as it should. Simplified my delima of what to do with my hitch after trading in my old truck, and refitting to my new truck.
by: Jeromi K03/30/2012
It was hard to tell from the pictures but this item uses the handles to rotate the locking clevis and is as easily removable as the OEM equipment! The fit was fantastic and assembly only took about 15 minutes. Big savings being able to continue using my Pro series 15k.
by: Greg01/12/2018
2018 Ford F-350 Super Duty
We had our dealer install the RP30156. They were more than satisfied with the product. We had a 2014 F350 and installed this to make our Reese 5th wheel hitch work in our 2018 F350.
by: Big Cip11/18/2012
2012 Ford F-350 Super Duty
Very easy to install, I didn't curse or throw a tool putting it together!
It really looks good with my old hitch in my new 2012 F-350 Lariat.
I haven't towed my RV as of yet, but I will let y'all know how that goes when we go camping next weekend. Attached are some pics.
by: Edward02/23/2019
2008 Chevrolet Silverado
Good product.
Easy build easy install.
Suggestion, you might want to offer the 1.5 inch socket with the purchase. They r a bit hard to come by.
Old hitch an easy fit.
by: Joseph07/04/2019
I installed this adapter in my 2019 F-350 Super Duty Long bed. I won’t kid you, you need some patience when it comes to adjusting it to fit your truck. Each mount hole seemed to be at a different height thanks to Ford. But it took all of about 20 mins to assemble and install. Fits great once you set the depth adjustments. Will see how it does towing this afternoon.
by: Wesley 05/12/2024
Fits like a glove about 15min to assemb le
by: Steve F.01/09/2017
2017 Ford F-350 Super Duty
Reese's Under Rail Adapter RP30156 is very easy to assemble and to install. Instructions provided are well written reducing the assemble time to les than five minutes. Installation took longer due to the snug fit between the trucks underbed rails and the adapter's pins.
Etrailer's delivery time is outstanding as well as their customer support team. They were very helpful in identifying the correct adapter match.
by: Elizabeth R03/03/2020
Ford F-250 Super Duty
I recently purchased an F250 with the puck system. This drops right in easily and works great with my 5th wheel Reese hitch.
by: Geoff11/11/2018
Ford
I purchased a Reese Elite Series Underbed Rail Adapter for Standard 5th Wheel Trailer Hitches to adapt my old 5th wheel hitch to my new Ford truck. It arrived promptly after ordering, assembled easily, and works great. It was a great reasonably priced alternative to a $1000+ new hitch made for the under bed rail system in the new Ford trucks. Very pleased with the product and with etrailer.
Geoff B.
11/12/2019
Excellent
by: Brent B.08/27/2017
2017 Ford F-350 Super Duty
Great Price, Fast free Shipping, Phone ordered and etrailer was excellent with fitment applications.
Ordered this for my 2017 F-350 which has the Ford 5th wheel prep package. It assembles easy with clear instructions and tips for mounting. Sturdy, strong and durable. Easy to remove when not towing. Great product from the great people at etrailer. Saved me the money to replace my entire 5th wheel hitch. I kept my Reese 16K hitch which mounts to this adapter. Thanks etrailer!!!
Brent B.
8/27/2018
Product works great a year later.
by: Bryan 03/29/2024
perfect fit
fast shipping
Great Service
by: William01/21/2019
2018 Ford F-250 Super Duty
I received my Reese hitch frame using the 3 day shipping. It took around 1 hour to assemble. It was easy to assemble after watching the you tube video plus reading the paperwork that came with it.
by: Paul S09/16/2022
2014 Jeep Patriot
I bought this in preparation of receiving my 2022 F350. I haven't got the truck yet. I believe this is a well made product to adapt my current B&W Patriot fifth wheel slider hitch that I'm taking our of my 2014 F250 which uses rails, to the Ford puck system. From everything I've read this will do the job. It definitely is sturdy and heavy. I will have to consider the additional weight in my payload weight calculations, but the F350 should handle it.
by: Steve S.07/18/2017
Received the 5th wheel adapter on time .
Took about 15 minutes to assembly, then it took about 15 more minutes to adjust . My husky 5th wheel slider fit perfect .Thank you so much.
25
565
Show More Reviews Ask the Experts about this Fifth Wheel Hitch
Do you have a question about this Fifth Wheel Hitch?
- Using Sliding Fifth Wheel Hitch on 2010 F-150 with 6-1/2 Food Bed
- We recommend using a fifth wheel hitch with a slider on any truck bed that measures between 6-1/2 and 8 feet in length. Failure to do so can result in the front of the trailer loft striking the rear of the truck cab during sharp turns and causing damage. If the fifth wheel is equipped with a Sidewinder extended pin box, a standard non-sliding hitch may be used. A Sidewinder will relocate the pivot point from the hitch-king pin connection 22 inches rearward to the point where the pin box
view full answer... - Fifth Wheel Hitch Recommendation for 2006 GMC Sierra Short Bed
- Since your 2006 GMC Sierra 2500HD is a short bed you would need a slider hitch to allow you to make tight turns without cab interference. Our part # RP30047 (same as Reese 30047) is a stationary hitch so the best alternative would then be slider version of this hitch which is part # RP30075 so that you'd have the turning clearance needed.
For a rail kit you'd want to go with a custom fit kit as it will minimize drilling when compare to a universal one. For that the best option is the
view full answer... - Where to Mount Fifth Wheel Rail in Bed of 2001 Chevy Silverado 1500
- To place a set of fifth wheel rails in the bed of your 2001 Chevy Silverado 1500 like the universal rail kit part # RP30035 will require you to set the rear rail edge 25-1/8 inches from the rear truck bed edge. To place the front rail you'd want to then put a hitch like the # RP300928 you mentioned in the rear rail and wherever the hitch places the front rail is where it needs to go.
view full answer... - Fifth Wheel Trailer Hitch Recommendation for a 2012 Ford F-250 and 2012 Heartland Elkridge Trailer
- For your new 2012 Ford F-250 and Heartland 5th wheel trailer, I recommend going with a 16K Reese hitch which will give you plenty of room to spare as far as capacity and will provide you with years of service.
To me a standard bed is an 8 foot bed. That would mean you would need the fixed version, # RP30047. But if your bed is 6-3/4 feet long, you would need a slider. The slider that offers the most travel and most clearance for making tight turns is the round tube slider found with
view full answer... - Will the Reese 16K Fifth Wheel Hitch Transfer from a Dodge Ram to a 2000 Chevrolet Silverado
- The Reese 16K Sliding Fifth Wheel Hitch, # RP30075, and base rails will transfer from your Dodge Ram to your 2000 Chevrolet Silverado as long as your base rails are Reese rails. The only components that may not transfer are the frame brackets. To determine if your frame brackets will transfer, we will need to know what type of frame brackets you were using to determine if they will fit on the Silverado.
If you were using a universal install kit like part # RP30035, then the frame brackets
view full answer... - Compatibility of Reese Hitch With RP30154 Tow Prep Package Puck Adapter
- The Reese # RP30154 puck-to-industry standard bed rail adapter provides industry standard rails that would be compatible with 5th wheel hitches from Reese, Draw-Tite, Curt, B & W, Demco, Husky, Valley and others. It'll work great with the # RP30051 Reese hitch you mentioned.
The Reese # RP30051 which uses a double jaw that holds the king pin more tightly than a slide bar jaw. The tighter the king pin is held, the better the ride quality. This hitch would also be compatible with the
view full answer... - 5th Wheel Trailer Hitch and Installation Kit for a 1997 Ford F250 Short Bed
- For your 1997 Ford F-250 short bed I recommend the Reese 5th wheel installation kit # RP30035. It will fit if the truck with or without overload springs.
If your truck has a gross vehicle weight rating under 8,500 pounds then the distance from the rear edge of the truck bed, not the tailgate, to the back edge of the rear rail is 29-1/4 inches. You would then use the hitch in the rear rail to locate the front rail and to drill the holes for the brackets.
If the truck is rated over
view full answer... - Best 5th Wheel Hitch for a 2014 Chevy Silverado 2500 w/ 6-1/2 Foot Bed
- The best 5th wheel hitch for your 2014 Chevy Silverado 2500 with a 6-1/2 foot bed is going to be the B&W Patriot 5th Wheel Trailer Hitch w/ Slider item # BWRVK3270. B&W makes the best hitches in the towing business. The 3/4" thick jaw on the Patriot is precision machined to provide a tight, sturdy connection. And unlike slide-bar models, the rounded 2-piece jaw on this fifth-wheel trailer hitch inhibits rattle and movement by securely wrapping around your trailer's king pin, resulting in
view full answer... - Recommended Clearance Between Trailer Loft and Truck Bed Rail When 5th Wheel Towing
- The ideal clearance between the top of the bed rails on the truck and the bottom of the loft on the trailer is indeed around 6". This will allow for clearance between the truck and trailer during most normal driving encounters such as bumps in the road, steep driveways, etc. In regards to a specific angle, this, I cannot provide as there are several factors at play that would vary for each setup. The best advice I have would be to just use common sense when you are out and about. There's
view full answer... - Recommendation for a 5th Wheel Trailer Hitch and Installation Kit for a 2011 Ford Super Duty
- With a short bed on your 2011 Ford Super Duty, you will need a slider hitch. There are no 18k sliders available, but there are numerous 16k hitches. I recommend the Reese 5th Wheel Trailer Hitch with Round Tube Slider, # RP30075, that you have referenced.
The round tube offers 12 inches of travel which will provide more clearance when making 90 degree turns. The hitch also features a double locking jaw which provides more hitch to king pin contact that single or slide bar connections.
view full answer... - Fixed 5th Wheel Hitch for 2016 Ram 3500 Mega Cab with Factory 5th Wheel Prep
- 5th wheel towing is easier with a long bed truck. Long beds avoid the need for slider hitches (and the need to get out of the truck to release the slider every time you need to make low-speed sharp turns). A 1-ton long bed like the Ram 3500 or the F-350 is an ideal choice for 5th wheel towing, both for pulling power and trailer-to-truck clearance.
The linked diagram shows you the recommended minimum clearances for 5th wheel towing. Some combinations of short bed truck and trailer will
view full answer... - How To Re-Install Tensions Plate In The Leg Of Reese Fifth Wheel Hitch With Round Tube Slider
- I called my contact at Reese and asked about the tension plate that came out when you were using your fifth wheel.
Another Expert and I went to our showroom and took a 16K Reese fifth wheel like your # RP30075 apart to see how the plate can be removed and re-installed. You obviously do not need to know how to remove it so to re-install it you will need to move the handle all the way rearward so it allows the plate to be installed with less tension. Insert the plate in the slot on the
view full answer... - Can 2018 Ford 150 with EcoBoost Engine Tow 7,500 Fifth Wheel Hitch
- A 7,500 lb trailer would not be a problem at all for a 2018 Ford F-150 with the 3.5 liter EcoBoost. I looked up the capacity of your truck and every configuration of it with your engine has quite a bit more towing capacity than 7,500 lbs so you'd be good.
Since you have a short bed truck you'd need a slider hitch to allow you to make sharp turns. For that I recommend the Reese 16k slider hitch part # RP30075 because this hitch has a jaw system that holds the king pin tightly and a round
view full answer... - Fifth Wheel Hitch Recommendation for 2004 Dodge Ram 2500 with Rail Kit Installed
- Since your 2004 Dodge Ram 2500 is a short bed you'll need a slider hitch to provide the clearance needed to make sharp turns. A super popular option is the Reese slider hitch part # RP30075 which has enough capacity and a round tube slider that operates smoothly.
Or you have the option for an automatic slider with the Demco Hijacker part # DM8550034 which slides back as you make tight turns to give you the clearance automatically.
Both of these will fit the rails you have installed
view full answer... - How Does Gross Combined Weight Rating Determine Towing Capacity
- It's not always evident what a truck's max capacity is, even by reading the owner's manual, but if you look at the ratings sticker on the driver's side door jamb, you can get an accurate statement of the truck's towing abilities. On the sticker, look for the Gross Combined Weight Rating, GWCR which is the maximum amount the truck plus the fully loaded trailer can weigh. From that, subtract the GVW, which represents the curb weight of the vehicle, plus gasoline, cargo and passengers. The
view full answer... - Are Replacement Leaf Springs Available For Reese 5th Wheel Hitch Slider Bases
- Les ressorts à lames pour l'attelage de remorque Reese 5th Wheel avec curseur à tube rond # RP30075 ne sont malheureusement pas une pièce que nous portons. En fait, j'ai rencontré ce problème dans le passé avec un accroc qu'un voisin a amené et a constaté que nous ne pouvions pas obtenir le ressort et a fini par remplacer la base entière par la pièce # RP50024 pour remettre le voisin sur le route.
(The leaf springs for the Reese 5th Wheel Trailer Hitch w/ Round Tube Slider # RP30075 are
view full answer... - Lighter Weight Fifth Wheel Hitch for 2005 Dodge Ram 3500 Short Bed
- Since you have a short bed 2005 Dodge Ram 3500 you would need a slider fifth wheel which in general are typically a bit heavier due to the slider mechanism, but we have some lighter weight options like the Reese Slider # RP30075 which comes in at 151 lbs. This would be the lightest option.
Then for a rail kit the custom install kit part # RP50140-58 would be the way to go as it's a much easier install and a standard weight for these types of kits.
view full answer... - 5th Wheel Hitch and Adapter for 2017 Dodge Ram 2500 with Prep Package
- Yes, the Reese 5th Wheel Trailer Hitch w/ Round Tube Slider - Dual Jaw - 16,000lbs # RP30075 will just require the Reese 5th Wheel Rail Adapter for Ram OEM 5th Wheel Towing Prep Package - 25,000lbs # RP30154 to work with the prep package in your 2017 Ram 2500.
If you need wiring for your new 5th wheel trailer, you'll want to use the Curt 5th Wheel/Gooseneck Wiring Harness 7-Pole item # C56000, which connects to the US Car Connector port on your Ram 2500 and puts a 7 way connector in
view full answer... - 5th Wheel Trailer Hitch and Installation Kit Recommendations for a 2010 Ford F-250 Super Duty
- Yes, you can use the Reese 16k slier, # RP30075, on your 2010 Ford F-250 Super Duty. In addition to the hitch, you will need an installation kit. I recommend a custom installation kit because they take about half the time to install versus a universal kit. For your truck, you would need # RP50082-58.
This hitch and slider offers 12 inches of travel for added clearance when making 90 degree turns. There are many hitch options for your truck but if your trailer weighs under 16,000 pounds
view full answer... - 5th Wheel Trailer Hitch and Installation Kit Recommendation for a 2011 Ford F-150
- For the 2011 Ford F-150, all of the 5th wheel trailer hitch options currently available use above the bed rails. While these rails will raise up from the bed surface 1.15 inches. With a trailer weight 12,000 pounds and a pin weight of 1,500 pounds, you can use a 15k or 16k hitch.
I also recommend going with a custom installation kit because they install much easier and in less time than universal kits. For your truck, I recommend the Curt Sliding 5th Wheel Trailer Hitch, 16k, # 16516,
view full answer... - Does Reese Ford Fifth Wheel Rail Adapter part # RP30156 Fit Industry Standard Fifth Wheel Hitches
- The Reese Ford OEM rail kit adapter part # RP30156 uses the standard rail dimensions you have which are 22 inches apart. Your current hitch that has rails that are 22 inches apart on center will work great with this adapter in the bed of your 2019 Ford F-250.
view full answer... - Do Ford OEM Fifth Wheel Rail Kit Adapters Add Height to Hitches
- The rail kit adapters like part # RP30156 do raise the hitch up a little bit from the ones that fit the puck system directly but not a significant amount beyond what a standard rail kit would carry the hitch at.
There isn't a great and cheap way to tow a fifth wheel trailer so I would recommend you go with a quality setup. Since you want to go with a Reese Revolution (great choice) I would recommend the OEM rail kit with a fixed hitch since they are lighter and quieter...and cheaper...like
view full answer... - Adapter to Fit Curt Slider Hitch to Ford Factory Fifth Wheel Rail Kit
- The Reese Elite Ford Rail Kit adapter part # RP30156 is exactly what you'd need. This fits the factory Ford rail kit you have in your 2019 Ford F-350 and is compatible with Curt slider hitches like your Curt # C16541.
view full answer... - Will the Reese Slider Hitch part # RP30051 Fit the Reese Elite Underbed Adapter part # RP30156
- Most likely you do have the Reese Slider Hitch part # RP30051, but you can check out the product pictures to compare to yours to make sure.
This hitch is compatible with the Reese Elite Underbed Adapter part # RP30156 that you referenced.
view full answer... - Will a 5th Wheel Hitch from a 2011 Ford F-350 Fit a 2016 Ford F-350
- The factory puck system is the same for both a 2011 Ford F-350 and a 2016 Ford F-350. Therefore, if the hitch uses the factory puck system then it will work well for you. If the 5th wheel hitch did not utilize the factory puck system then you will need an adapter to use the hitch like part # RP30156. Please keep in mind that this adapter only works with 5th wheel hitches that use industry standard rails (ISR).
Another thing you will want to be aware of is bed length. Since you have an
view full answer... - Will the Reese Rail Kit Mounting Adapter work with a Ford OEM 5th Wheel Prep Kit and Reese Slider
- The Reese Mounting Adapter Rail Kit, # RP30156, will work with the Reese 18K square tube slider hitch, # RP30084, in the Ford tow prep kit that is in your 2012 F-450.
Since you now have an 8 foot bed you will most likely have no need for the slider function of the # RP30084 hitch. This means you can just leave the hitch in the towing position all the time, or, if noise is an issue with the slider portion of the hitch, you can replace the slider unit with standard legs, # RP30727.
The
view full answer... - 5th Wheel Hitch Adapter for 2015 Ford F-350 Super Duty With Factory 5th Wheel Prep Package
- Since your 2015 F-350 Super Duty has the factory 5th wheel prep package you'll want to use the Reese Elite Series Underbed Rail Adapter # RP30156.
This adapter accommodates standard 5th-wheel trailer hitches with weight ratings of 15,000 lbs, 16,000 lbs, or 20,000 lbs. You can still use your 25K-rated hitch but the system capacity will be 20,000-lbs overall.
view full answer... - How to Use a Reese 16K 5th Wheel Hitch on a 2018 Ford F-250 with the Factory Prep Package
- Yes, the Reese Elite Series Underbed Rail Adapter part # RP30156 is exactly what you need to use your Reese 16K 5th Wheel Hitch on your 2018 Ford F-250 with the factory prep package. You just need to make note of the new hitch height after the 3" tall adapter is installed.
I have attached a review video for you.
view full answer... - Does the B&W Patriot Hitch Fit in the Rails Created by a Reese Elite Series Underbed Rail Adapter
- I have a solution for you, but the Reese Elite Series Underbed Rail Adapter for Standard 5th Wheel Trailer Hitches - 20,000 lbs # RP30156 is not compatible with the B&W Patriot Slider because the B&W Patriot 5th Wheel Trailer Hitch w/ Slider - Dual Jaw - 18,000 lbs # BWRVK3270 has a slightly different mounting setup than is allowed with the Reese Elite.
Instead, you can use the Demco 5th Wheel Rail Adapter for Ford OEM 5th Wheel Towing Prep Package - 25,000 lbs # DM6175 to drop into
view full answer... - Which Fifth Wheel Rail Kit Adapter Fits 2020 GMC Sierra 2500 with OEM Rail Kit
- We have a similar adapter that fits the OEM rail kit of your 2020 GMC Sierra 2500 with the part # DM6333 but the Ford Rail Kit Adapter part # RP30156 would not fit your truck.
view full answer... - Compatibility of Reese Round Tube Fifth Wheel Slider w/ Reese RP30156 5th Wheel Rail Adapter
- The # RP30047 is a stationary fifth wheel hitch, so you'll need to figure out the part number of the slider unit you have. If it's an # RP50042, it will be compatible with the # RP30156 rail adapter. If you have the now discontinued # RP50008, it is NOT compatible with the # RP30156.
I've provided a photo showing the two different slider units.
view full answer... - Is There An Adapter for Standard Rail Mounted 5th Wheel Hitches To Use with Ford Pucks
- Yes, there are adapters that will allow you to use a standard above bed mounted fifth wheel hitch with the Ford Factory Puck System. For this, I recommend the Reese Elite Series Underbed Rail Adapter for Standard 5th Wheel Trailer Hitches part # RP30156 just keep in mind it adds 2-3/4" to the height of the bed.
view full answer... - Adapter for 2021 Ford F-350 With Puck System to Use Older 5th Wheel Hitch
- We have exactly what you need in order to mount your older Reese 5th wheel hitch in your 2021 Ford F-350 with the factory puck system:
- Reese Elite Series Underbed Rail Adapter for Standard 5th Wheel Trailer Hitches # RP30156
This adapter will mount to your Ford's puck system and give you what are essentially industry-standard rails for your Reese hitch. Just mount your Reese 16k hitch right on the adapter and you're set!
I have added a link below to a video review for you to
view full answer... - How do I Install My Above Bed Fifth Wheel on my 2016 Ford F-250 with Fifth Wheel Package
- Your 2016 Ford F-250 Super Duty comes equipped with Below Bed Rails in order to install a fifth wheel hitch. However, your current Reese hitch is an Above Bed Rail hitch. Because of this, in order to use your existing hitch with your new truck you will need a Reese Elite Series Underbed Rail Adapter # RP30156.
I've attached a video review of the adapter for you to take a look at.
view full answer... - Will a Pullrite Super5th Model 0800 5th Wheel Hitch Fit Reese Adapter for Ford Factory Prep Package
- I have included a picture showing the mounting slot spacing on adapter # RP30156. It accepts hitches that fit in industry standard above the bed rails. Front to back they are 22 inches apart on center. Left to right there are 2 sets, on set at 20-1/2 inches apart on center and another set at 29 inches.
view full answer... - Could Pullrite Superglide Fit 2021 Ford F-250 with OEM Rail kit and Reese Ford Rail Adapter
- If the Pullrite 4100 Superglide was the ISR model meaning it was designed to fit industry standard rails then yes the # RP30156 would work with it and would allow it to fit the OEM rail kit of a 2021 Ford F-250. I did some checking on the 4100 and it could have been equipped with a few different rail configurations which is why you'd have to check.
For a similar auto slider that fits directly to your rail kit the Demco Hijacker part # DM8550024 would work great and unlike the Superglide
view full answer... - Solution for Fifth Wheel Trailer that Sits Nose High After Using Reese Ford Prep Adapter
- The Curt Q16 part # C16120 has an adjustable head that allows you to go from 13 to 17 inches in height. You can try lowering the head of the hitch or you can raise the pin box in the mounting holes of your trailer.
Typically there are a few different height setting you can use on the pin box of a trailer to allow for height adjustment.
view full answer... - Does The Reese Elite Series Underbed Adapter Work With A Curt A16 Sliding Hitch
- Yes, the Reese Elite Series Underbed Rail Adapter # RP30156 is compatible with your 2016 Ford F-250 Super Duty short bed with OEM puck package, and will work great with the Curt A16 5th Wheel Trailer Hitch # C16521 you mentioned.
view full answer... - Reese Elite Series Underbed Rail Adapter for Ford OEM 5th Wheel Prep Package Pucks & Standard Hitch
- The Reese Elite Series Underbed Rail Adapter for Standard 5th Wheel Trailer Hitches - 20,000 lbs # RP30156 is a confirmed fit for the Ford OEM puck system. It is not compatible with other manufacturers OEM system, but is a perfect fit for your 2019 Ford F-350 5th wheel factory prep package. I've attached a video to show this fit.
This adapter will allow you to lock it to the bed and will also allow you to use a standard 5th wheel hitch made for above bed rails.
view full answer... - Gooseneck Trailer Hitch to 5th Wheel Trailer Adapter for 2013 Ford F-250 with Tow Prep Package
- For mounting above bed fifth-wheel hitches on your 2013 Ford F-250, we have the Reese Rail Kit Mounting Adapter, # RP30156, that you have referenced. This adapter will accept any 5th wheel trailer hitch that fits in standard above the bed rails.
The B and W Companion hitch is designed to fit in a B and W turnover ball gooseneck hitch with the ball removed so you cannot use # RP30156.
What you will need is an adapter to either fit around the gooseneck ball, like the Andersen Ranch
view full answer...
Info for these parts were:
Test Fit:
Joe V
Test Fit:
Shane H
Test Fit:
Robert C
Test Fit:
David F
Test Fit:
Kevin C
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Expert Research:
Victoria B
Written by:
Lindsey S
Installed by:
Jeff D
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Chris R
Updated by:
Adele M
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Matthew E
Updated by:
Isabelle B
Updated by:
Noah M
Video by:
Jonathan Y
Video by:
Michael B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
David O.
5/6/2024
It works great