Dexter Predator DX2 Trailer Brake Controller - 1 to 2 Axles - Proportional
Tekonsha Wiring Adapter for Electric Brake Controllers - Nissan
Part Numbers: 58-8,3050-S
Retail:$251.09
Our Price: $179.55
You Save: $71.54
Dexter Predator DX2 Trailer Brake Controller - 1 to 2 Axles - Proportional
part number: 58-8
This proportional brake controller keeps it simple with intuitive controls that are easy to use. Includes a large digital LED display, fingertip gain control, a slide-bar manual override, and built-in safety features.
Features:
- Brake controller activates your trailer brakes in proportion to your vehicle's braking action
- Automatically adjusts trailer's braking based on deceleration of tow vehicle
- Large digital LED display shows your controller settings and monitors voltage output
- Simple, intuitive controls keep your settings in easy reach
- Adjustable gain setting determines the amount of braking output sent to the trailer's brakes
- Built-in, slide-bar manual override activates trailer brakes to control sway in emergency situations
- Deceleration sensor lever lets you adjust initial braking power and aggressiveness for smooth, safe braking
- Built-in safeguards protect your vehicle and trailer
- Current limiter protects vehicle from shorts in the trailer wiring
- Hazard flasher immunity prevents pulsing of the brakes when flashers are activated
- Quick and easy mounting with included bracket and hardware
- 90 To -35 degree mounting range - must be horizontally level
- Pigtail harness hardwires into your vehicle
- Made in the USA
Specs:
- Application: trailers with up to 2 axles (4 brake assemblies)
- Compatible with electric brakes only
- Dimensions: 6-1/2" long x 3" wide x 1-5/8" tall
- Mounting angle: -35 degrees to 90 degrees vertically
- 7-Year limited warranty
Proportional Braking
The Dexter Predator DX2 brake controller comes equipped with proportional braking to give you the best towing experience. Proportional braking means that your trailer brakes mimic your tow vehicle's brakes. If you slam on the brakes in your vehicle, your trailer brakes will activate with the same intensity; if you brake lightly, your trailer brakes lightly too. The trailer's braking is in proportion to your vehicle's braking. This saves wear and tear on the tires and the brakes on both your vehicle and trailer.
The Predator DX2 uses an internal 3-axis accelerometer to sense how your vehicle is braking so it can send the right amount of braking power to your trailer. It measures the inertia of your tow vehicle and activates the trailer's brakes to slow at the same rate. The result is uniform braking across your towing setup. No push-pull action - just smooth, proportional braking every time.
Large Digital LED Display
The Dexter Predator DX2 features a large LED display that's easy to see so you can check on your current braking output setting with a glance. This display is designed to keep it simple and not overload you with information. The display will also show you the voltage to confirm that the trailer brakes are receiving power.
Braking Output
During the initial setup process, use the thumbwheel on the front of the brake controller to adjust the braking output. The output control lets you set the maximum amount of power that will be applied to your trailer's brakes. Typically, the output is only readjusted when you experience changing road conditions or if the weight of your trailer changes. The power output control on this brake controller lets you set the maximum amount of power that will be applied to your trailer's brakes. Typically, the power output is only readjusted if you switch from a heavy, loaded trailer to a much lighter, empty trailer - or vice versa.
During the initial setup process, you can use the thumbwheel to adjust the power output. To get more power to your brakes, increase the power level. To decrease the power output, lower the power level.
Sensitivity Adjustment with Deceleration Sensor Lever
Once you have the overall power set, you can fine-tune the power output by adjusting the sensitivity of the internal sensor. This controls the aggressiveness of your trailer's braking, meaning how quickly the brakes reach the maximum braking level. You can adjust this when you're towing heavy loads and you need more umph to bring your trailer to a stop. Your tow vehicle doesn't need that much power to brake in time, but your heavy trailer does. Boost gets the braking power to your trailer brakes faster and with more intensity so that it doesn't push your tow vehicle forward. To increase the sensitivity for towing heavier loads, move the lever away from you. For a lighter load, move the lever toward you.
Slide-Bar Manual Override
The Dexter Predator DX2 comes with a built-in manual override slide-bar in easy reach, great for stopping sway or controlling your trailer's momentum in emergencies. To engage the manual override, just push the slide-bar to the left. This will activate the trailer's brakes and brake lights without you having to apply the brakes on your tow vehicle, perfect for limiting trailer movement while you're cruising.
You can also engage the manual override to help you move a sliding 5th-wheel hitch closer to your truck's tailgate for tight maneuvering during slow speed turns. Just apply the manual override to hold the trailer in place while slowly moving the tow vehicle forward.
Quick, Simple Installation
Because the controller operates with an internal inertia sensor, it must be mounted between -35 degrees and 90 degrees vertically. The Predator DX2 also needs to be horizontally level and parallel with the direction of travel to function properly. During initial installation, the deceleration sensor lever must be positioned straight up and down. After mounting the Predator DX2 using the included bracket, hardwire the controller directly into your vehicle.
Installation Accessories
See etrailer.com's exclusive 7- and 4-way brake-control installation kit (ETBC7 - sold separately) if you don't already have a 7-way plug at the back of your vehicle
Note: One of the following will be required to ensure proper installation:
- 20-Amp circuit breaker (9506P - sold separately) for 2- to 4-brake applications
- 30-Amp circuit breaker (38630 - sold separately) for 6- to 8-brake applications
058-008-00 Dexter Predator DX2 Electric Brake Controller with Inertia Sensor - 1 to 2 Axles - Proportional
Replaces 58-8
Tekonsha Wiring Adapter for Electric Brake Controllers - Nissan
part number: 3050-S
Ease installation of your electric brake controller by using this custom wiring adapter. Simply connect the 4 wires of the harness to your brake controller and then plug the other end into the built-in harness beneath your vehicle's dash.
Features:
- Pigtail wiring adapter eases installation of your electric brake controller
- Connector end plugs into the built-in port beneath the dash of your vehicle
- Wire end connects to the wires on your brake controller with the included butt connectors
- Limited 1-year warranty
Installation of Tekonsha Brake Controller Adapter
This adapter plugs into the 6-pin connector on your vehicle's built-in brake control wiring harness. Older models will have the harness located underneath the dash, to the left of the steering column, taped to another harness near the emergency brake pedal. Newer models have the harness under the dash, above the gas pedal.
To install your electric brake controller you need to connect the four wires - ground, power, brake switch and brake power - of the controller to your vehicle. Certain manufacturers offer pre-wired options, typically known as tow packages, wherein these wires are run for you from the dash to the trailer connector on the back of your vehicle. Often, a brake controller wiring harness is included with your tow package. This harness plugs into a port beneath your dash and connects to the four wires of the brake controller. If you do not have a harness, or you need a new one, the Tekonsha wiring adapter will serve the same purpose.
3050-S Tekonsha Brake Control Wiring Adapter
Replaces 20266
California residents: click here
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
- Wrong item was ordered
- Defective
- Too difficult to install
Customer Reviews
Dexter Predator DX2 Trailer Brake Controller - 1 to 2 Axles - Proportional - 58-8
Tekonsha Wiring Adapter for Electric Brake Controllers - Nissan - 3050-S
Average Customer Rating: 4.9 out of 5 stars (67 Customer Reviews)
This proportional brake controller keeps it simple with intuitive controls that are easy to use. Includes a large digital LED display, fingertip gain control, a slide-bar manual override, and built-in safety features. Ease installation of your electric brake controller by using this custom wiring adapter. Simply connect the 4 wires of the harness to your brake controller and then plug the other end into the built-in harness beneath your vehicle's dash.by: Rick12/29/2019
Could not have worked better! Perfect fit, good heavy gauge wiring with thick insulation. Wires within a "cage" conduit. Plenty of length to allow attaching trailer brake controller anywhere it needs to go. Very pleased with this purchase! In the photo, you can see just a bit of the 3050-s (upper left corner) where it connects to the rest of my "system".
by: Rancher01/07/2023
Finally a brake controller that does what I set it to, not what it’s little computer brain, designed by someone who has never pulled a trailer thinks it needs to do.
by: Michael 09/22/2022
I installed this controller in my 1982 Chevy K20 pickup.
It works perfectly! Etrailer exceeded my expectations with their level of customer service from the time the order was placed to the products arrival at my home. Truly 5-star service!
The video tutorials are straight forward and very helpful.
The universal installation kit literally had everything needed to complete the job.
Side note:
I would have liked to see the (2) 10ga wires in the insulation to be black and blue, not black and white, no biggie, black on black and white on blue.
Thanks again!
by: Bob J.09/07/2016
I am very satisfied with the Dexter Axle Predator Electric Brake controller. I purchased the Dexter brake controller to be compatible with Dexter car trailer axles on a 16 foot car hauler. The braking unit is very useful when towing in very steep and winding mountain terrain. I feel that the braking is a necessary safety item when towing in a hilly or mountainous environment and the Dexter Predator brake controller provides the great control and driver peace of mind knowing that a heavy load can be managed. The unit installs very easily with the proper adapter.
by: Richard12/28/2022
was difficult to find a good mounting location away from leg room
by: Brian06/18/2020
I recently bought the Redarc Tow-pro Elite Break controller and the harness adapter to match my 2018 Armada Platinum. I also choose expedited shipping since I had our first camping trip booked only a few days away! It showed up on schedule early in the day, installation took less then an hour from initially opening the box to completion. The harness adapter made installation incredibly easy, and the redarc control knob looks good mounted (which I was previously worried about installing in my dashboard). I’ve logged several trips already, set up was easy as well as fine tuning the brake intensity. Great product!
by: Timothy 11/05/2019
2014 Nissan Titan
I recently purchased a 16X6.4 tandem axil trailer and needed to install a good brake controller in my 2014 Nissan Titan for it. I found etrailers web sight and after looking around for a bit found the exact controller I wanted. Their web sight made it a lot easier then I thought and they had everything I needed including the correct harness. I even called just to make sure and the person I spoke to on the phone not only assured me I had the right items but also took my order. The whole process took less then 10 minutes. I received the controller and harness in just a couple days and everything was correct. Installed it in the truck and Walla!! I have brakes on my trailer and they work great. If there is ever anything else I need for this trailer in the future I will be paying these guys a visit.
Thanks
by: roula m07/25/2017
The parts I ordered were shipped and now are installed on a enclosed trailer that carries a variety of motorcycles. The roads are mountainous and treacherous here so I have to be able to 100% depend on my trailer brakes. The brakes have been flawless, giving me total confidence. Perfect parts, great price. Customer service was a 10. Thanks for all your help !
by: Fred09/09/2017
My brake controller was a great match for my needs. I have a 4 brake trailer which gets the proper control from my Dexter unit. From empty weight to heavy load the adjustment is just a slight roll of the knob. I like the digital read out so I can glance down to check system operations. It does great f or me and fit right in to the factory wire set up in my truck
by: Nick T04/19/2016
2004 Infiniti QX56
I already had a Tekonsha Voyager Trailer Brake controller which had pigtails. Added this wire harness and four (4) butt splices and I just plugged it into my 2004 Infiniti QX56. Great.
by: Aaron 02/06/2024
Delivered on time and the right parts
by: Mark06/18/2020
Item was shipped promptly and was easy to install works great on my 20,000 pound felling goosneck trailer with 4 electric over hydraulic disc brakes.
by: Eric 06/29/2020
Worked great. Probed the wires just in case, but the wire colors on the adapter matched the colors on the brake controller. The yellow crimps were a little larger than needed. Had to REALLY crimp them down to hold the larger gauge wires on the adapter.
by: Jerimiah Lemieux07/09/2014
Extremely good quality parts and harnesses. I needed them by a specific day and it was very important that I got these for a camping trip we had planned for months, they were at my door exactly when promised. The sales staff on the phone were especially courteous and patient, also eager to answer my questions and double checked MY order for correct fitment to ensure a perfect experience. I never do these online reviews but I was impressed enough to sit down and do this. Can't wait till I need trailer parts again, I'll shop here without a second thought.
by: Gary M.06/01/2015
Just finish installing the brake controller so I have not seen it in operation. Everything that was needed for installation was contained in the package. Due to limited access due to the chosen mounting location getting two of the side screws started took some effort.
by: John B11/29/2016
2011 Nissan Titan
The wiring harness I ordered from Etrailer came in a timely manner and it plugged directly into my Nissan Titan. I am very pleased and it has met all my expectations!
by: Dad07/22/2021
Plug n play on my 2018 Nissan frontier with a redarc tow pro elite.
by: Terry03/06/2017
This is a great product, installation was easy, instructions accurate and product works as advertised. I would do this all over again if needed.
by: Anthony12/29/2018
A great product. Had it installed by my Benz dealership. No adjustments needed.....factory settings were all I needed to tow my boat and trailer.
by: Dennis 06/06/2023
Everything as described.
by: Joseph 06/19/2020
Couldn't have asked for a more simpler, affordable way to get a brake controller. The OEM ones are way over priced. This connected in perfectly with no hard wiring necessary. If I can install it anyone can.
by: Randy11/03/2017
Nissan Pathfinder
Wire loom didn't go the full length of the wires. Butt connectors are not the correct size. Fit my Pathfinder without issues.
by: WalkerEOD11/03/2017
Easy to install and adjust, seems to work well with my Pathfinder. The butt connectors that were included were not the correct size but i wouldn't have used them anyway.
by: Joshua 11/19/2019
Product arrived as described and greatly helped the installation of my brake controller.
by: Chuck 08/03/2022
Products came quickly... what I was looking for.
25
67
Show More Reviews Ask the Experts about this Trailer Brake Controller
Do you have a question about this Trailer Brake Controller?
- Parts Needed to Install a Trailer Brake Controller on a 1987 Dodge Ram 350 Full Size Van
- The 1987 Dodge full size vans do not have wiring under the dash to wire in a brake controller. You will need to hardwire in the controller using an installation kit. There are different kits depending on whether or not the vehicle has a trailer connector or not.
If your van has a 4-Way trailer wiring harness, you will need to use the 4 and 7 way installation kit # ETBC7. It comes with the 7-Way, wiring, and accessories to wire in the brake controller. If you do not have any type of trailer
view full answer... - Brake Controller Recommendation and Installation on a 2003 GMC Sierra with or without Factory 7-Way
- I did a little research and found that the Dexter Predator, # 58-8, is for 2 to 4 brakes. So if each wheel on your two axle trailer has a brake assembly, or just two of them, this brake controller will work.
Brake controllers are not vehicle or trailer specific, so you will be able to use the best one for your application. I recommend going with a proportional controller because they offer the best and safest braking, and will reduce wear on both the trailer and tow vehicle brakes. I
view full answer... - Brake Controller for Towing a Trailmaster Trailer with a Harley Electra Glide Classic Motorcycle
- I have spoken with small tent trailer manufacturers about which brake controllers are best for their trailers with brakes and found that they recommend using a a time delayed brake controller for their trailers. They said that many of their customers have excellent performance from the Activator electric trailer brake controller by Draw-Tite, # 5504.
The advantage of a time delayed brake controller on a motorcycle is that it can be positioned in any way, so you can easily find a mounting
view full answer... - Trailer Brake Controller for a 2008 Saab 9-7X with Factory 7-Way Trailer Connector
- The 24 pin receptacle you are seeing sounds like the OBD2 port and would not be used for a brake controller. You will need to utilize the owners manual or a Saab technician to locate the wires and to determine the functions of those wires. Identifying the wire functions is critical because a brake controller has to be hardwired in since there is no plug and play option available.
The wires on a brake controller are as follows:
white is ground
black is 12 volt power in
blue is output
view full answer... - Can Dexter Predator Brake Controller Fit 2019 Ford Explorer
- Yes the Dexter Predator brake controller part # 58-8 that you referenced does fit your 2019 Ford Explorer by using the install harness part # 3035-S and you'd be set.
view full answer... - Should Brake Controller Draw Power All The Time
- You won't have any problem with power going to the brake controller all the time. This lets the brake controller keep all of its settings and not lose them every time the vehicle is turned off.
Brake controllers are designed to enter a sleep mode after a period of time when there is no activity. An idle controller draws very little current and will not drain the vehicle battery.
view full answer... - When to Use a 20 or 30 amp Circuit Breaker When Installing Brake Controller
- You'd want to use the 20 amp circuit breaker like # PK54220PL unless your trailer has more than two brake axles. If that's the case you'd want to use the 30 amp breaker # 38630.
view full answer... - Can the Predator DX2 Brake Controller Work on a Trailer with 6 Brake Assemblies
- I have a solution for you, but the Dexter Axle Predator Electric Brake Controller # 58-8 that you referenced can only be used on up to 4 brake assemblies.
Instead you would want the Prodigy P2 Brake Controller part # 90885. This controller can be used on up to 8 brake assemblies and would work great for you. This is our best selling controller because of how easy it is to set up and how well it works.
view full answer... - Parts Needed to Flat Tow a 2005 Cadillac SRX or 2007 Ford Edge Behind a Motor Home
- In order to determine if your vehicles can be flat towed and if there are any special requirements (such as a specific transmission or engine) you will want to consult your vehicle owner's manuals.
To flat tow either vehicle you will need 5 main components: base plates, tow bar, safety cables, lighting, and a supplemental braking system.
Base plates for the Cadillac SRX: # 3125-3.
Base plates for the Ford Edge: # 4408-1.
Compatible tow bar for either vehicle: Falcon # RM-520.
Safety
view full answer... - Installing Dexter Predator DX2 Brake Controller on 2008 GMC Envoy
- As long as your 2008 GMC Envoy is equipped with the factory 7-Way connector there will be blunt cut wires located inside the vehicle on the driver's side under the instrument panel to which your Dexter Predator DX2 Brake Controller # 58-8 can be directly wired. Based on my research there should be a red/black wire that connects to the black (12V power) wire on the controller, a white wire that connects to the white (ground) wire on the controller, a light blue/white wire that gets connected
view full answer... - Can the Dexter # 58-8 Predator DX2 Brake Controller Be Installed Vertically
- According to Dexter, the # 58-8 Predator DX2 needs to be mounted in the direction of travel, level on a side to side plane. If mounted on vertical plane as you mention, the brake controller would not function.
If the vehicle design somehow limits the installation options, and you have no other option than to mount a brake controller vertically, you can use a time delayed brake controller like the # 5504 Draw-Tite Activator IV. Because the controller is solid state, if can be mounted
view full answer... - Installing Trailer Brake Controller on 2012 Chevy Silverado with Factory 7-Way
- If your 2012 Chevy Silverado is equipped with the factory 7-Way connector at the rear there isn't an actual OEM port behind the dash for a brake controller plug-and-play install, however all the needed wiring is present.
This means you can simply hardwire the Dexter Predator DX2 Brake Controller # 58-8 directly to the factory wire bundle behind the dash of your truck. Based on my research these blunt cut wires are behind the steering column. You will make the following connections using
view full answer... - Troubleshooting Brake Controller with 1.5 on Display All of the Time
- Sometimes brake controllers need to be reset as they get a weird internal bug. Try unplugging yours for a minute or so and replugging in and see if that helps. Here's how to test the controller though:
Testing the brake controller is fairly easy. Sever the blue brake output wire near the brake controller leaving enough room to reconnect it and then apply the manual slide. Using a circuit tester like the Tester, part # PTW2993, you should get output to the controller side of the wire
view full answer... - Dexter Predator Brake Controller 58-8 Installation in 2005 Ford F150
- If your 2005 Ford F-150 has only 4 wires at the bumper (or only a 4-pole connector) and you need to install a 7-way vehicle-side connector, you could use the Hopkins # 37185. If you already have the 7-way connector on your truck, you will need to make the additional wire connections for the brake controller. (The 4 wires you have carry the brake light, running light and turn light signals for your trailer, plus a ground: white = ground, brown = running/brake lights, green = right turn signal
view full answer... - Best Trailer Brake Controller for 2004 Chevy Blazer
- For a brake controller for your 2004 Chevy Blazer I recommend the Prodigy P3 Brake Controller part # 90195. This is our best selling brake controller because of how well it works and how easy it is to setup. This is a proportional brake controller that senses the amount of braking the tow vehicle is applying and applies a proportionate amount to the trailer brakes. This will be the last brake controller you buy as it is incredibly reliable, works, well and is easy to use. It can easily
view full answer... - Location of Brake Controller Connector on 2012 Ram Truck
- The connector you are looking for will be located taped to another larger wiring harness just to the right and above the emergency brake pedal, as shown in the photo I have edited for you.
You can confirm that this is the correct connector by testing it with a circuit tester like part # PTW2993. One pin should show a constant 12-volt power supply, another should show voltage only when the brake pedal is pressed.
Unfortunately, my contact at Tekonsha was not able to shed any light
view full answer... - Will the Dexter Preadator Brake Controller # 58-8 fit a 2006 Cadillac SRX
- Yes, there is a way to install the Dexter Axle Predator Electric Brake Controller # 58-8 in your 2006 Cadillac SRX. The first thing you need is a 4-way trailer connection at the rear of your vehicle. You may already have this, but if not you will need part # C59496. This comes with everything you would need to install the 4-way, I attached install instructions and an install video for you to check out also.
Next, you need to convert the 4-way to a 7-way so that you can install the brake
view full answer... - Parts Needed To Install a Dexter Predator DX2 Trailer Brake Controller On a 2022 Chevrolet Tahoe
- The Dexter Predator DX2 Trailer Brake Controller # 58-8 will connect to a 2022 Chevrolet Tahoe with the Tekonsha Custom Wiring Adapter # 3016-S as long as you have the factory tow package with 7-way. You will need to wire the adapter to the controller since Dexter does not put a connector on its controller.
If your Tahoe does not have the factory tow package you will need the Custom Multi-Tow 7-Way and 4-Way Trailer Connectors # 30955 to plug into the wiring on your Tahoe and the controller
view full answer... - Parts Needed To Tow a Towmaster Trailer with Electric Brakes with a Winnebago
- The Dexter Predator brake controller # 58-8 would be a good fit to power the trailer brakes on your Towmaster trailer. You would need to hard wire the brake controller to the Winnebago, connecting the wires coming from the back side of the brake controller as follows.
The brake controller wire functions are:
White: Ground, attached to a clean piece of unpainted metal.
Black: 12v lead, attached to the positive battery terminal on the Winnebago with a 40amp circuit breaker.
Blue:
view full answer... - Installing Redarc Tow Pro Elite Brake Controller on 2016 Nissan NV 3500 with Factory Tow Package
- On your 2016 Nissan NV 3500 that's equipped with the factory tow package you can use the Wiring Adapter # 3050-S to easily install the Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR. The plug end of the adapter will connect right to the factory port behind the dash of your NV 3500 and the pigtail end will just splice into the wires from the brake controller (color to color).
I have attached a short video review of the Tow Pro Elite that you can also check out, along with the
view full answer... - Universal Brake Controller Wiring Kit for 2017 Nissan Titan XD
- For your 2017 Nissan Titan XD the brake controller harness you are looking for is the part # 3050-S. This plugs into the portu under your dash and gives you 4 blunt cut wires you can wire to basicaly any brake controller.
view full answer... - Where is the Brake Controller Wiring Port on a 2006 Nissan Frontier
- Your truck should have a port under the dash for connecting the brake control wiring adapter, part # 3050-S. I have added links below to the instructions that are included with the adapter that show the location of the port.
view full answer... - Recommended Brake Controller Harness for a 2009 Nissan Titan With Bare Wires On Brake Controller End
- Yes, the Tekonsha Wiring Adapter for Electric Brake Controllers part # 3050-S will plug into the tow package port on a 2009 Nissan Titan and then allow you to hardwire a brake controller of your choosing.
view full answer... - Parts Needed to Add a Brake Controller to a 2012 Nissan Murano
- A brake controller will have to be hardwired to a 2012 Nissan Murano since there are no brake controller wiring harnesses designed to fit it. To do this you will need a few parts and the brake controller.
First, if your Murano does not already have a trailer connector you will start by installing a 4-Way using # 118653 for the regular Murano or # C59496 for a CrossCabriolet model.
Once the 4-Way is installed or if the Murano already has one you would then install # ETBC7 which includes
view full answer... - Brake Controller and Install Harness Recommendation for a 2015 Nissan Frontier
- For your 2015 Nissan Frontier the recommended install harness to use is the # 3050-S if you are wiring up a brake controller that has 4 blunt cut wires.
Or if you go with a Tekonsha controller like the P2 part # 90885 you would want the # 3050-P.
For a brake controller I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake controller because of how well it works and how easy it is to setup. This is a proportional brake controller that senses
view full answer... - Brake Controller Harness for 2017 Nissan Frontier
- There is a harness available that will splice into the brake controller and plug into your 2017 Nissan Frontier; the Tekonsha Wiring Adapter for Electric Brake Controllers - Nissan # 3050-S. I've added a link to a video review of this item for you to check out.
view full answer...
Info for these parts were:
Expert Research:
Michael H
Expert Research:
Jameson C
Installed by:
Jeff D
Updated by:
Laura H
Updated by:
Alexander C
Written by:
Wilson B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.