Part Numbers: SS48GV,C31022
84 x 18 Heavy-duty plow with thick rubber cutting edge self-adjusts up and down to smoothly clear a path over concrete, gravel, and grass. Side scoops catch more snow with each push. Aluminum blade can be manually angled to either side.
Features:
Specs:
Installation is quick and simple - just slide included shank assembly into your 2" receiver and secure with pin.
Then lift the blade, one end at a time, onto the frame's holders and fasten with snap pins.
The SnowSport HD blade is mounted on an angled, 3-position shank assembly, allowing you to plow to the left, to the right or straight ahead.
To plow, lower the blade and begin driving; no wiring or hydraulics are needed. The unique push frame on the shank assembly allows the blade to move along the grade of the terrain for easier, more efficient plowing. The heavy-duty rubber cutting edge is effective yet turf friendly, collecting snow and squeegeeing slush without digging into the ground.
When you reverse direction, the blade lies back, skimming over the surface of the ground so that you can easily take another pass.
Once you're finished plowing, just lift the blade and refasten into the travel position. The blade is secure enough to travel at highway speeds, and the low-profile design keeps it from blocking your vehicle's headlights. Removal for storage is quick and easy. The plow can be used on the rear of your vehicle, making it a cinch to back out of your snow-packed driveway.
California residents: click here
Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.
Features:
Specs:
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
(upbeat rock music) (upbeat rock music continues) Narrator This video is to be used in conjunction with your owner's manual to help you with the assembly and mounting of your new SnowSport HD Plow. You will need a receiver plow mount hitch installed on your vehicle before starting the plow assembly. Follow the written instructions for the mount kit for your particular model of truck. Next, you will want to gather the tools shown on the list: torque wrench, impact or ratchet with 9/16-inch and 3/4-inch socket, drill with 3/16-inch and 5/16-inch drill bits, number 3 Philips driver bit, 3/4-inch box wrench, 5/16-inch open end wrench, 3/16-inch Allen wrench, bubble level, and protective eyewear. Make sure your vehicle is parked on a level grade and you're ready to get started. Step 1.
Insert interceptor into receiver and secure with the hitch pin. The interceptor can be installed with the big leg turned either up or down as needed for proper push frame clearance, shown turned up in this video. Bolt the push frame to the proper hole pattern on the interceptor using 4 half-inch by four-inch bolts with flat washers and lock nuts. Leave bolts snug tight for now. Step 2.
With the bolts snug tight, level the push frame horizontally, then check push frame for vertical plum. If plum, tighten all four bolts and proceed. If not plum, refer to the shimming procedure in step number 2 of your owner's manual. Step 3. Align the end of the rubber edge with the matching channel of the bottom section of the aluminum blade.
Slide the rubber edge into the channel until it's centered on the aluminum blade. Take the top half of the blade and connect the tongue-n-groove joint with the bottom half. Slide the top section until it's centered on the bottom section. Step 4. At each end of the blade, insert two square nuts into each channel, flat side facing out.
These nuts will be aligned with the holes at the top and bottom of the slide hinges. Place each slide hinge on the blade and align the edge of the hinge with a factory mark on the blade. When both hinges are properly aligned, they should measure 22 1/2 inches apart. Turn the 3/8-inch by 3/4-inch hex bolts with flat washers into the nuts that we're previously slid into the channels on both the top section of the blade and the bottom section of the blade. Double check to make sure each slide hinge is lined up with the factory mark. Then, tighten the hex bolts on the top section first, then tighten the hex bolts on the bottom section. Using a 5/16-inch bit, drill a hole through the blade in each factory punched hole on the slide hinge. Turn a 3/8-inch by 1-inch self-threading bolt into each drilled down hole and tighten. Step 5. At the tongue-n-groove joint, drill a 5/16-inch pilot hole at the factory mark in the v-groove at each end of the blade. For a 96-inch wide blade, there will be an extra hole drilled, and bolt installed per side. See step number 6 in your owner's manual. Turn a 3/8-inch by 1-inch self-threading bolt into each pilot hole and tighten. Using a torque wrench, tighten all six bolts in each slide hinge to 31 foot pounds. Step 6. At the bottom of the blade, double check that the rubber edge is centered. Then using a 3/16-inch bit, drill a pilot hole at each of the four factory marks in the v-groove. Be sure to only drill through the first layer of aluminum and into the rubber. Using a number 3 Philips bit, run a self-drilling screw into each of the four pilot holes. This prevents the rubber-cutting edge from moving. Step 7. Now, hang the blade on the push frame in the transport position and insert the keyhole pins. Insert two square nuts into the top channel. With a hex nut turned onto the stud of the blade marker, align the blade marker with the hole on the lift handle and bolt the marker and handle to the blade using one of the square nuts in the channel. Turn a 3/8-inch by 3/4-inch bolt into the other hole on the handle and thread it into the second nut that was slid into the channel. With the handle flushed with the blade edge, tighten both bolts connecting the lift handle to the blade. Repeat at the other end. Step 8. Attach the rubber box end to the blade using the metal cap plate and four 3/8-inch by 2 1/2-inch self-threading bolts. Tighten these bolts until the rubber end begins to compress to the blade. Insert a fifth bolt to tighten the bottom of the rubber end to the bottom of the metal cap plate. Secure this bolt with a flat washer and lock nut, tighten all bolts equally, and repeat at the other end. The installation of the plow is now complete, and your plow is ready for the winter season. (upbeat rock music).
Average Customer Rating: 4.7 out of 5 stars (29 Customer Reviews)
84 x 18 Heavy-duty plow with thick rubber cutting edge self-adjusts up and down to smoothly clear a path over concrete, gravel, and grass. Side scoops catch more snow with each push. Aluminum blade can be manually angled to either side. Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.Since I had the ARB Winch Bumper already installed this product had to be heavily modified to fit to include cutting and welding.
NOTE: Instructions contain Contradictory Torque specs for the 7/16 hardware. On One page Step #9 says torque to 70 lbs, while a different page Step #9 says 59 lbs. 70 lbs, will ring off the bolt....
Snowsport PlowEtrailer.com does it right from start to finish. On top of having a great web site, the staff are the best.
Keeping in mind, I ordered this in December, about 5 days before our first big snow, here in Ohio. Within an hour of ordering my SnowSport HD plow, I was upgraded to special priority shipping, that was a nice surprise! The plow arrived in about two days, in three boxes, as I ordered the front hitch at the same time. I feel bad for my UPS carrier, these boxes were not for the faint of heart. The assembly went smoothly, the manufacturer uses high end parts and everything is well marked and the instructions are easy to follow. I estimate it took me two hours to get everything put together, with a coffee break in between. I am impressed with the construction, wow. Heavy duty is right!
We had four inches of snow yesterday. I opened the garage door and went to work, two pushes to clear the parking spots, and one easy push down the two hundred foot gravel driveway. Like butter.
I was done. It took less then 15 minutes. I put this blade on my 2003 rear wheel drive, not 4x4, Chevy Blazer. I backed into the garage and it looked like I had just put the blade on, this blade could last a long time. I love it. I cant wait until we get a foot or more of snow, my wife wants to plow next time. Plus I have cable chains comming from Etrailer, they should be here any day. Just in case my two wheel drive has tracktion problems in the deeper snow. Thanks a bunch, Etrailer!
We installed this on our 2011 Honda Ridgeline and a week later it snowed... And snowed.... And snowed.. 5 feet in 24 hours ( we live on the lake near Buffalo) and it's still snowing... This wasn't good, it was AWESOME! It was an easy install and assembly and worked absolutely perfect! We have a tough driveway and this kept it clear with no issues, no problems and we used it all day and night! When you spend that much on something you've never even seen before you can have reservations... It's worth every penny. It's solid ( more than we thought it would be) and does the job with ease. No .. It's good, but...... It's exactly as advertised and etrailer not only had the best price, the communication with my order was exceptional. Now... If only the town could send a plow down my street.....
I had a few hiccups while assembling (over tightening things early, I think) but once I got it together it’s been awesome. Clears easily and efficiently. Have used to clear as much as 14” of snow (that required pushing off to the side more often) but once you get used to the technique this thing is a lifesaver. I can clear a 300’ long driveway in 15 minutes or so for an average 4-5” snowfall.
It does what it's supposed to do, puts the snow from my driveways into piles not on my driveways. Got it over some of the other variations because it doesn't have electronics or wiring to break when its -30.
-Cutting edge that came with mine has been decently strong for running on gravel driveways.
-Light enough I can mount/unmount whenever I need to.
-Doesn't tear up lawns, which is where I have to push most of the snow I move.
--Needs a through eyebolt for quick connect back dragging rather than the ratchet strap idea they sell.
--Side panels are the weak link of the system
they cut in hard and make the plow jumpy while turning
the nubs on the back are also not deep enough to allow the plow to free stand when storing
and as hard as they are they get jammed right up with any sort of twig/leaf debris you might be plowing up
---I'll be replacing these with some sort of steel or aluminum panel with a tubing edge once they start to fail.
-- The sliding parts aren't powder coated so they'll need to be repainted every year or two or its going to rust right out.
Overall though it does what I wanted it to do, and paid for itself by saving me a lot of hours not having to shovel or snowblow. And even if my vehicle were ever to go down I could toss it on the back of another vehicle to get the snow moved.
It arrived in about 3 days, in 3 packages. I researched online extensively before choosing the SnowSport HD. Price at etrailer was about 10% cheaper than other sites. I already had the front hitch on my 2014 Honda Pilot, so all I had to do was assemble the plow and go play.
I had watched multiple videos of using and assembling the product, before ordering. All the time shoveling my driveway with a shovel as I had to get in and out and keep the driveway, ice free for visitors.
Everything was in the boxes, not a single bolt or washer missing. Assembly was as simple as I expected. I completed assembly without assistance in about 90 minutes, at a normal pace. Neither my cordless (nor corded) drill would screw the 3/8 self tapping screws to connect the two blade pieces, but it was not difficult to do them with a ratchet.
I set the height correctly for the front hitch, and I have a 6 inch hitch drop/riser that that should give me good plowing with the back hitch (have not tested yet, but expect good results)
The design is very well thought out, it is a quality product that will probably last the rest of my life (home use). I recommend it to others, and I would buy it again.
I ordered the plow as we finished getting about 10 inches of snow over a couple of days. The temperature stayed below freezing and there was still about 6 inches of snow to play in, when I had the plow mounted. Based on some reviews I had concerns that it might not do well, pushing piles of snow, or the snow that had been sitting for days. I was pleasantly surprised to be pushing even snow the city snow plow had mounded in front of the neighbors driveway. I plowed the neighbors from the street and about 80 feet in, without difficulty, three passes in a couple minutes and the job was done.
I live in a 1950s ranch home, with a single car garage (in basement) near Pittsburgh PA, my Honda Pilot fits in the garage with just inches to spare going through the door. The 7 foot blade is just a little narrower than the side view mirrors. So I can drive in and out. I have the blade and mount in the garage, and they are light enough that I can mount the blade front or back while in the warm garage and drive out to plow snow. Pull back in the garage, remove the blade and drive into to town to go to the office for work.
I am so excited to have this plow that, it probably will not snow more then a trace for a couple of years... Fate denying me the opportunity to play with it for a long time.
Great plow, fit my pickup good, cut my plowing to a third of the time. My pickup is a 1 ton diesel 4+4 bolted it on and went to work!!
The shipments arrived within days of ordering. The snow sport HD had easy to follow instructions . The plow was put together without any problems.
I had my local mechanic install the front receiver for me on my 2011 Ridgeline.
A day after everything was set to go, we got about six inches of wet snow.
I used the plow and I was very happy with it’s performance. I was able to clear my driveway and my neighbors in very little time. Overall I think it is a simple but effective plow for homeowners.
Mike E
.
This is the greatest invention I think that has came out in a long long time don't let How deep the snow gets worried you because this product will plow snow all day long with no problems I've plow through snow in my lawn that has been 3 foot deep measured with a solid yardstick no problem to push it and that's on a Jeep Grand Cherokee that's the nice thing about this plow when you go pushing snow the deeper it gets it just moves up and down and keeps pushing the snow in front of you just make sure you push the snow back far enough the first time as with any plow wherever you leave your pile and it freezes in you won't move it again super great product this is my second one my first one I bought 10 years ago and it worked for 10 years with no problems whatsoever finally sold the vehicle so I let the plow go with it big mistake but that's okay cuz I just bought a brand new one great product great design anybody thinks this product won't work in Canada Alaska Erie PA this plow will work wherever there is snow.
Straight forward installation. Great for moving my trailer into a tight location and also provides a great tow point with a shackle attached.
This is my Third front mount receiver hitch. Never had a problem and they fit perfect for the vehicle I order them for.
Received and installed the plow today 11/27/17. The directions were perfect also the components fit great . I had ordered and installed a two inch front hitch on my 2011 Ford Ranger 4.0 liter V6 with no issues. Now just waiting for some snow to fall in upstate NY. Very quick ordering and delivery will recommend
Simple efficient design.Had mine several years. A real simple to use/maintain plow.
Be sure to get a front-mounted receiver for your vehicle if you can - much easier to maneuver the plow with it in the front.
No hydraulics or electrical to install/maintain. Quickly clears the driveway. Hang it up out of the way in the Spring.
The snow plow is as expected, built solidly and easy to assemble. The plow itself comes in two pieces which was unexpected but seems sturdy when bolted together. It also skips across my snow/ice packed gravel driveway, but I expect it will work well moving fresh snow. For the money it is a great entry level plow.
Mounted on the front of my jeep fine and used to winch myself out several times all is well perfect fit
Best buy ever made.I am going on my 5 year with this plow. It was on my 92 Jeep then on my 94 Blazer and now my 2001 Blazer. I plow a 1/4 mile home drive way and 1000 SF lot at work in Northern MI. The plow has never failed. Powder and wet snow no problem. People think it's a toy until they see it work. You supply the vehicle and common sense and the plow will do the rest.
great fit and finish.Easy installation.I'm going to use it for a winch install
Perfect fit and performs as intended
Easy on and off with just 1 person (me). It performs well. I've pushed a foot with it with no issues. Although I think the heavy wet stuff would be too much at a foot. I have a 2015 Silverado 1500 4x4 with the 4.3
Great tool works to clear the snow easily, ease of use is great does the job
Very easy to use, great for my gravel driveway! Did the job!
Seems well built for the price, took a few hours to assemble.
Works great and easy to use and install
Went together fairly easily, seems solidly built, waiting for snow to see how it works!
Good buy for the $$
Ask the Experts about this Snow Plow
Do you have a question about this Snow Plow?
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.