TorkLift Camper Tie-Downs - Custom Frame Mount - Front
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear
Part Numbers: TLC2220,TLR3500
Our Price: $854.19
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
TorkLift Camper Tie-Downs - Custom Frame Mount - Front
part number: TLC2220
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.
Features:
- Creates attachment points for securing your camper to your truck bed
- Requires turnbuckles (sold separately) to attach camper to tie-downs
- Ensures excellent handling by distributing camper's weight evenly and lowering its center of gravity
- Avoids a top-heavy setup that would be vulnerable to strong winds and sway
- Remains virtually invisible beneath your vehicle
- Remove the arms and you'll hardly know the brackets are there
- Adjusts for simple, secure connection to camper
- Extend arms out from truck body to clear bowed sidewalls and fenders
- Choose between 2 anchor holes to get the best angle for a secure hold
- Made of black powder coated steel to resist corrosion
- Mounts tight to your vehicle's frame - minimal loss of ground clearance
- Uses pre-existing holes in the frame - little to no drilling required
- Includes 2 front tie-downs and installation hardware
- Made in the USA
- Lifetime warranty
A Safe Ride is a Comfortable Ride
If you're looking for the best tie-downs for your camper, frame-mounted is the way to go. The frame is the most solid part of your entire vehicle, so it just makes sense to attach your camper to something that's not going to warp, bend, or twist. Even more importantly, the camper's center of gravity will sit lower and its weight will be spread across the entire bed. This avoids a top-heavy load perched on top of your bed rails that's liable to sway and get pushed around by crosswinds. The camper's not going to shift or slide around while you drive; it's going to stay put, and your truck is going to handle just like it does without a camper.
Quick Tip: If you have a plastic or spray-in bed liner, it's important that you use a rubber mat under the camper to eliminate any sliding or bouncing.
Don't Ruin Your Truck's Looks
Frame-mounted tie-downs are also a great pick for preserving your truck's good looks. The brackets install on the frame, tucked nearly flush with the underside of the vehicle. Remove the arms from the brackets when you're not hauling your camper, and the brackets will be barely visible.
Custom Fit, No-Drill Installation
Completely custom to your vehicle, the tie-downs attach to exisiting holes in your frame so that there's little to no drilling and no need for any modifications. Because they're custom, you'll want to use our in-house application guide to make sure you get the exact right model. The tie-downs you need might be different depending on what type of hitch or other accessories you have.
Securing Your Camper
Once the tie-downs are installed, use a set of turnbuckles (sold separately) to secure the camper to the tie-downs. The shank on each arm has 2 pin holes so you can choose how far out they extend, that way the turnbuckles can reach the anchors on your camper without making contact with your truck. Tighten the turnbuckles to the correct level of tension (not too tight!).
Make sure the anchor points are offset from the tie-downs instead of lined up with them so that they will hold your camper from multiple angles. This is important for keeping your camper from shifting. Two holes in the attachment plate of the tie-downs let you find the best angle for you camper anchors.
C2220 Tork Lift Truck Camper Tie Down - Front Frame Mount - Custom Fit
Replaces C2213
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear
part number: TLR3500
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.
Features:
- Creates attachment points for securing your camper to your truck bed
- Requires turnbuckles (sold separately) to attach camper to tie-downs
- Ensures excellent handling by distributing the weight evenly and lowering the center of gravity
- Avoids a top-heavy setup that would be vulnerable to strong winds and sway
- Remains virtually invisible beneath your vehicle
- Remove the arms and you'll hardly know the brackets are there
- Adjusts for simple, secure connection to camper
- Extend arms out from truck body to clear bowed sidewalls and fenders
- Choose between 2 anchor holes to get the best angle for a secure hold
- Made of black powder coated steel to resist corrosion
- Mounts tight to your vehicle's frame - minimal loss of ground clearance
- Requires drilling into the frame
- Includes 2 rear tie-downs and installation hardware
- Made in the USA
- Lifetime warranty
A Safe Ride is a Comfortable Ride
If you're looking for the best tie-downs for your camper, frame-mounted is the way to go. The frame is the most solid part of your entire vehicle, so it just makes sense to attach your camper to something that's not going to warp, bend, or twist. Even more importantly, the camper's center of gravity will sit lower and its weight will be spread across the entire bed. This avoids a top-heavy load perched on top of your bed rails that's liable to sway and get pushed around by crosswinds. The camper's not going to shift or slide around while you drive; it's going to stay put, and your truck is going to handle just like it does without a camper.
Quick Tip: If you have a plastic or spray-in bed liner, it's important that you use a rubber mat under the camper to eliminate any sliding or bouncing.
Don't Ruin Your Truck's Looks
Frame-mounted tie-downs are also a great pick for preserving your truck's good looks. The brackets install on the frame, tucked nearly flush with the underside of the vehicle. Remove the arms from the brackets when you're not hauling your camper, and the brackets will be barely visible.
Custom Fit
Because they're custom, you'll want to use our in-house application guide to make sure you get the exact right model. The tie-downs you need might be different depending on what type of hitch or other accessories you have.
Securing Your Camper
Once the tie-downs are installed, use a set of turnbuckles (sold separately) to secure the camper to the tie-downs. The shank on each arm has 2 pin holes so you can choose how far out they extend, that way the turnbuckles can reach the anchors on your camper without making contact with your truck. Tighten the turnbuckles to the correct level of tension (not too tight!).
Make sure the anchor points are offset from the tie-downs instead of lined up with them so that they will hold your camper from multiple angles. This is important for keeping your camper from shifting. Two holes in the attachment plate of the tie-downs let you find the best angle for you camper anchors.
R3500 Tork Lift Truck Camper Tie Down - Rear Frame Mount - Custom Fit
Replaces 39114 and R3502
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Did not arrive in time
Customer Reviews
TorkLift Camper Tie-Downs - Custom Frame Mount - Front - TLC2220
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear - TLR3500
Average Customer Rating: 4.7 out of 5 stars (3187 Customer Reviews)
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there. Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.by: Francisco11/19/2023
I like to thank Lori with etrailer and guiding me through the process of getting , Front and rear,
Torklift Camper Tie-downs -Custom Frame Mounts. Well doing research this was the best way to go for tying down and stabilizing a camper. Torklift camper tie-downs are solid well built!
I had ordered Mounts on Monday and received them on Friday . I Had the tie-downs on my , 2019 Chevy Silverado 2500 by Saturday. The whole process was awesome , real easy installation. Great help with videos and instructions on mounting tie-downs on my truck provided by etrailer. I’m going to use them on my pop-up Hallmark Camper. Thank you for all your help etrailer.
by: Don06/12/2020
I bought the TLC2220 for a low profile pop up cabover camper which I had for another Chevy 3/4 ton truck. The prior truck utilized a different attachment but was not available for my current 2012 Chevy truck. The TLC220 offers an excellent attachment point that is made out of thick well made steel and covered with a nice black powder coating. The instructions that came with the product should be thrown away. Pictures are poor, verbiage is incomplete and large gaps in the actual application. The saving grace is the video from etrailer. This is a great video. Complete, simple with no gaps and tells you exactly what the difficulties might be. This video even called out the socket sizes. Unfortunately the mate to this; the TLC 3212 rear mounts has a poor video with again gaps in application. And... again the TLC3212 written instructions is just fireplace starter material.
by: Amos06/23/2020
I originally ordered the incorrect rear Torklifts camper hold downs for my truck. However, I called etrailer and explained my error. They not only helped me pick the correct ones, they sent them out that day. I haven’t installed the rear TC hold downs yet. I was most impressed with the free shipping both ways with no questions asked! I was issued an RMA and the refund came quickly. Very good customer service in an age when there often isn’t any service , let alone great service. The front mounts fit perfectly!
by: Richard E07/28/2017
Installed on a Curt 2 1/2 receiver just put on my F350 SD Supercab Diesel SRW 4x4. This bracket does fit this truck with the Curt receiver. I found a little oil on the drill bits and a reamer to remove the last bit of metal from the holes in the receiver helped mount the brackets.
by: Mike 02/29/2024
Nice bullet proof set up little tricky to hook up but solid set up
by: Scott02/24/2022
Easy to install. Good quality construction. Great customer care when I ordered the incorrect version - was well handled.
by: JR04/16/2024
2015 Chevrolet Silverado 2500
Well made! Heavier material than I even expected. I'm amazed at how well designed they are, and how well they fit.
by: Patricia 09/21/2023
Delivery was fast. Works perfectly for our Lance slide-in camper.
by: Steven 03/09/2021
2017 Ram 3500
etrailer.com is the best. Great products and great customer service. I purchased these TorkLift custom frame mounted camper tie downs to be installed on my 2017 Chevrolet 3500 HD Duramax single axle short bed. Installation was easy using the great videos provided by etrailer.com.
by: Gunnar04/26/2024
2017 Chevrolet Silverado 2500
Great customer service and products
by: Ken02/10/2020
These tie downs, as well as the TLC3215 set, were easy to install if you have some mechanical ability. They function well with our Lance truck camper and become unobtrusive when you remove the tie down extensions. It's too early to comment on corrosion resistance, but my hope is they hold up well.
by: eddyjames08/24/2016
looks good, easy to install and replaced the torklift tie downs used on factory hitch, now I have a 20,000 lb trailer hitch with 2,700 GTW also. and camper is secure.
Edward J.
8/25/2017
Fantastic, just like they were claimed to do
by: Bradley02/21/2024
Great people and easy to work with great company
by: Matt 03/30/2023
Super easy to install, I recommend using some masking tape on the hitch to mark where you want to install these.
by: Jack05/17/2015
2015 Chevrolet Silverado 2500
I took a long time in writing this review as I wanted to be able to test the product fully. In installing the Tie-Downs, the instructions are pretty vague when it comes to fishing the one bolt through the frame. What is not mentioned is that the position of the large washer that is on the bolt while having to be fitted through the hole makes the difference of getting the bolt through the hole or not. One reviewer said that he had to widen the hole in order to get the bolt through, I too had widened the hole a little, until I realized that it was the washer that was keeping the bolt from going through. The washer needs to be at a 45 degree angle allowing the bolt to be able to gain the extra room against the top of the frame to properly go through the hole. I know this does not sound clear, but what I say will make sense when you are under the truck fishing the bolt through the frame.
That said, after mounting, the Tie-Downs were very secure and all parts looked great. I was worried that the rear passenger side Tie-Down would hit the wide diesel exhaust. It fit perfectly in the space between the exhaust pipe and the frame with no modifications needed, great design and engineering. The Tie-Downs hold my truck camper great, secure and steady. Great product.
The bed mat fit perfectly as well. Exactly what is needed for the truck camper.
by: Welton06/04/2020
I ordered these upon recommendation from a friend. Upon receipt I got three estimates and went to a local body shop. When the owner reviewed the installation booklets, he was impressed by the detailed and thorough explanation and pictures by TorkLift. I do not suggest that one person install these, but it seemed easier with two people. I love that the tie downs can be partially removed during non-use to avoid catching on obstructions to the side of the vehicle. Also, the booklet gave a phone number for technical support in case the installer confronts any problems. The salesperson who helped me at etrailer was very helpful and made sure I ordered the correct items to fit my truck. I have always had good results with etrailer.
by: Kent03/11/2020
Nicole at etrailer was sharp and the products - 5 stars for her
The Torklift instruction pictures are poor - look like they have been copied 100 times.
Front brackets were fairly straight forward - but had to remove a skid plate and loosen the fuel tank to install the drivers side.
Rear brackets needed to drill holes. T L should provide a drill template.
Haven’t used with the camper yet.
by: Alan07/08/2022
GMC Terrain
These tire downs have held through rough terrain and an accident where the camper was hit from behind. Easy to use for fast on and off of the camper.
by: Curt M.07/17/2019
Both the product and the service are top notch. I ordered the front and rear tie-downs for a 2006 Silverado. The easy to follow instructions made it easy to install the customized tie downs. We have been on the road several times since I installed the tie downs and all the miles I've traveled were with confidence that my camper was secure.
Oh, the other great feature is that they are removable when not in use.
Thank you etrailer!
by: Jon 01/02/2022
After reviewing my options to hold a 3500lb trailer on my truck. I decided these were the only option. They are more expensive then the other options that bolt to the body and the bumper, But much more secure.
The install was fairly easy, Customer service from etrailer was awesome. When not in use they are barely visible. Great product, worth every penny!
Thanks again
by: Jeff10/19/2018
1994 Ford Van
TorkLift front anchor design requires fussy installation I could design a more elegant anchor, and have done so for a previous truck; These did not have complete powder coat protection inside the tubes, requiring painting inside tubes to ward off corrosion from inevitable road salt.
Once installed these proved secure and strong, and are superior to HappyJac truck box anchors.
by: Brian03/01/2019
Part of an order I made for camper tie-downs. Great product and it shipped extremely fast!
I always go to e-trailer first when looking for truck towing or other truck accessories. The customer service and speed of shipping really can’t be beat.
by: Mike Shea11/15/2019
Well made. Salesman provided great insight into the why these are so highly rated. Construction is exceptional. Directions on installation are easy, but watch the video first. Support team is excellent. Would I buy this again & recommend these..absolutely. Now that I own these, i'm always looking at other "rigs" & it's apparent the "word is out" on these. I haven't bought the back tie downs yet...but that's coming!
by: John03/21/2023
I’ve owned several truck campers and always use these tue downs. They are the best. Fit is always excellent
25
2451
Show More Reviews Ask the Experts about this Camper Tie-Downs
Do you have a question about this Camper Tie-Downs?
- Which TorkLift Camper Tie Downs for 2017 GMC Sierra 2500 Denali
- It sounds like you're looking for TorkLift camper tie downs for your 2017 GMC Sierra 2500 Denali with a short bed. If you've got a factory hitch and no step or running board that extends under the bed of the truck, then the correct TorkLift tie downs are parts # TLC2220 (front), and # TLC3215 (rear). If you also need new turnbuckles, you can use the TorkLift Locking FastGun Turnbuckles for Frame-Mounted Tie-Downs - Stainless Steel - Black # TLS9529-2-LK.
If you actually need to replace
view full answer... - TorkLift Camper Tie Downs For 2015 GMC Sierra 1500
- They will not. For rear tie-downs for the 2015 Sierra 1500, use # TLC2217 for the front tie downs and # TLC3214 for the rear. This assumes your truck has a factory installed hitch and the 6-1/2 foot bed. If you have a different bed length, please let me know. Knowing the cab configuration would be helpful as well.
view full answer... - Recommended Frame Tie-Downs for 2019 Chevy Silverado 2500 Crew Cab 6.5 Bed Aftermarket Hitch
- The correct TorkLift Custom Frame-Mounted Camper Tie-Downs for a 2019 Chevrolet Silverado 2500 (Crew Cab, 6.5 Bed, No Step/Boards, Aftermarket Hitch) is part # TLC2220 for the front and part # TLR3500 for the rear. These will fit both diesel and gas models.
If you are looking for turnbuckles as well, the TorkLift Locking FastGun Turnbuckles part # TLS9522-2-LK are what I recommend.
view full answer... - Torklift Tie Downs that Fit 2012 Chevy Silverado Extended Cab with Factory Hitch
- For your 2012 Chevy Silverado 1500 extended cab with running boards the length of the cab the correct Torklift camper tie downs are the # TLC2220 and # TLC3212. The front set does come with bolt leaders like you asked about as well.
view full answer... - Will TorkLift Tie Downs from a 2004 GMC Sierra 2500 Long Bed Fit a 2015 Sierra 3500 Long Bed
- It looks like the TorkLift tie downs for your old 2004 GMC Sierra 2500 long bed were # TLC2204 for the front and # TLR3503, # TLR3504, # TLC3206, or # TLR3501 for the rear.
The 2015 GMC Sierra 3500 Crew Cab long bed uses # TLC2220A for the front and # TLC3212A for the rear if it is without board or step underneath truck bed and with a factory installed hitch or TorkLift SuperHitch or without a hitch or # TLC2219 and # TLR3500 if it is without board or step underneath truck bed and with
view full answer... - Will Frame Mounted Camper Tie Downs Work with Wheel to Wheel Running Boards 2014 Chevy Silverado
- I do have a set of camper tie downs that will allow you to leave the Ranch Hand Running Boards installed on your 2014 Chevy Silverado 2500 but the TorkLift Custom Frame-Mounted Camper Tie part # TLC2220 will not work with these running boards. Unfortunately, we do not have a way for you to adapt the tie downs to work with your running boards.
Instead, I recommend using a set of bed mounted tie downs like the Brophy Stake Pocket Mounted Camper Tie Downs part # TDSF if your truck bed has
view full answer... - Steel Camper Tie Down Recommendation for 2016 Chevy Silverado 2500
- Yes, for your 2016 Chevy Silverado 2500HD without steps, factory hitch, and a 6-1/2 foot bed we have the steel, no-drill frame mount camper tie downs part numbers # TLC2220 and # TLC3215 which are a confirmed fit.
view full answer... - Does the TorkLift Camper Tie Down # TLC2220 Attach to Vehicles with Boxed Frames
- If you check out the installation instructions for the # TLC2220 you will see that this product will install on a full framed vehicle like your 2015 GMC 2500HD Sierra and that the fuel tank being nearby isn't an issue.
To pick out the correct tie downs for your vehicle you will need to follow the link I attached an select your vehicle options from the drop down menu to see what is recommended.
view full answer... - Recommended Frame Tie-Downs and Air Bags for a 2013 Chevy Silverado 2500 Extended Cab
- The correct TorkLift Custom Frame-Mounted Camper Tie-Downs for a 2013 Chevrolet Silverado 2500 Extended Cab is part # TLC2220 for the front and part # TLC3212 for the rear. They will not interfere with air bags such as the Firestone Ride-Rite Red Label Extreme Duty Air Helper Springs part # F2709 which is what I recommend.
view full answer... - Frame Mounted Camper Tie Downs for a 1997 GMC Sierra 1500
- We carry frame mounted tie-downs that would fit your 1997 GMC Sierra 1500. If you follow the link I attached you will be taken to a page that has all of the tie-downs we carry. You will need to select your vehicle info from the drop down menu and the correct ones will be listed.
view full answer... - Will TorkLift Custom Front Camper Tie Downs Work with AMP Bed Step on a 2016 Chevy Silverado 2500
- I checked the installation instructions for the AMP Research bed step for the 2016 Chevy Silverado 2500. It looks to me like it would get in the way of any custom fit REAR camper tie downs so I can't recommend trying to install both. But if you remove the bed step there are other options such as a tailgaite ladder #10-3000 or hitch mounted step (if your truck has a hitch) such as # WT81BS1.
But # TLC2220 are front tie downs so unless you have the cab step which would be at the side of
view full answer... - Recommended Front Camper Tie-Downs For A 2015 GMC Sierra 2500
- If your 2015 GMC Sierra 2500 has no steps or running boards and a factory hitch then I have the following options based on bed length and cab:
6-1/2' Bed - TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLC2220
8' Bed (Crew Cab) - TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLC2219
8' Bed (Double Cab) - TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLC2222
8' Bed ( Regular Cab) - TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLC2215
If
view full answer... - Camper Tie Downs For 2016 Chevrolet Silverado 3500
- To assist you in getting the right camper tie downs for your vehicle, I need some more information. These tie downs are specific to cab style, bed length, and what hitch you have installed on your truck.
I've linked the page to the options for your vehicle. They are priced to include the front and rear tie downs together as a package. If you need further help, let me know and I'd be happy to assist.
view full answer... - Could Torklift Front Camper Tie Down Fit Older and Newer GMC Sierra 2500
- What year truck do you have currently and what is the new truck? The Torklift Front Camper Tie Downs part # TLC2220 fit version of the GMC Sierra 2500 from 2011 all the way up to 2019.
view full answer... - What Are The Correct TorkLift Custom Frame-Mounted Camper Tie-Downs For a 2018 Chevy 2500 Short Bed
- The correct Rear TorkLift Custom Frame-Mounted Camper Tie-Down for your 2018 Chevrolet Silverado 2500 Short Bed is part # TLC3215. The correct Front TorkLift Custom Frame-Mounted Camper Tie-Down for your 2018 Chevrolet Silverado 2500 Short Bed is part # TLC2223 if you have a Double Cab or part # TLC2220 if you have a Crew Cab, assuming you have a factory installed trailer hitch. These do not require drilling.
The TorkLift Custom Frame-Mounted Camper Tie-Downs part # TLC2220 is for a
view full answer... - How To Find Correct TorkLift Custom Frame-Mounted Camper Tie-Downs for a 2018 Chevy Silverado 2500
- We do indeed still offer TorkLift Custom Frame-Mounted Camper Tie-Downs for a 2018 Chevrolet Silverado 2500. The part # TLC2220 and part # TLC3215 for example are for a Crew Cab 6.5' Bed without boards or steps and with factory hitch. The part # TLC2219 and part # TLC3215 are for a Crew Cab 8' Bed without boards or steps and with factory hitch.
I have attached our entire list below.
view full answer... - Is Drilling Required When Installing Tie-Downs On 2014 Chevrolet Silverado 2500 HD
- On your 2014 Chevrolet Silverado 2500 HD, when installing the TorkLift Custom Frame-Mounted Camper Tie-Downs, part # TLC2220, and part # TLC3212, there is no drilling required for installation. This tie-down system is designed for trucks with a 6-1/2 Foot Bed Extended and Crew Cabs without running boards that extend past cab.
I have attached links to the installation instructions for the tie-downs you can check out.
view full answer... - How to Install 1/2-Inch Bolt in TorkLift Custom Frame-Mounted Camper Front Tie-Downs # TLC2220
- For the TorkLift Custom Frame-Mounted Camper Front Tie-Downs # TLC2220 the 1/2-inch bolt that is to be installed in the hole in the bottom of the front spring perch should be placed using the included coiled bolt fisher wire. Insert the coiled end into the hole on the bottom of the perch and run it out the side. Then attach the bolt's threaded end and pull it back through to its position as shown in the linked image from the instructions.
The complete install instructions are linked
view full answer... - Can Happijack Qwik Load Turnbuckles Work with Torklift Frame Tie Downs
- Yes, the Happijac Qwik-Load turnbuckles are very similar to the Torklift Turnbuckles like the # TLS9529-2-LK so they would work fine.
view full answer... - Front and Rear Set of Torklift Camper Tie Downs for 2019 Chevrolet Silverado 3500 Diesel
- The TorkLift Custom Frame-Mounted Camper Tie-Downs # TLC2220 is a set of front camper tie downs. You'd need a rear set as well. The rear set you'd need for your 2019 Silverado 3500 HD Diesel would then be the # TLC3215.
view full answer... - 2008 Toyota Tundra In Bed Camper Tie Down Recommendation
- For your 2008 Toyota Tudra 6.5' bed you want the TorkLift Custom Frame-Mounted Camper Tie-Downs Front part # TLT2304 and rear part # TLR3500. These are designed specifically for your truck and will provide excellent tie down locations for your in bed camper.
The TorkLift AnchorGuard Derringer Turnbuckles for Truck Camper Tie-Downs part # TLS9020 really make loading and unloading very easy.
view full answer... - Correct Torklift Turnbuckles For A 2020 Ford F-350 6.75' Bed Supercab
- Hello Joe. I can definitely help get you set up with Torklift Camper Tie Downs for your 2020 Ford F350. Does your truck have a trailer hitch installed on the back? If so, was it installed from the factory or aftermarket? Let me know because that will determine the correct rear tie downs. The # TLF2022 front tie downs will be correct for your truck. The rear tie downs will be determined by the type of trailer hitch on your truck.
The # TLR3500 are for trucks with a non-Torklift brand aftermarket
view full answer... - Correct TorkLift Truck Camper Tie Down Kit for 2003 Chevy Silverado 2500HD with Aftermarket Hitch
- For the 2003 Chevy Silverado 2500 with 6-1/2-foot bed, without step and with a non-TorkLift aftermarket hitch installed our Fit Guide does show part # TLR3500 as the rear tie-down along with part # TLC2202 as the front. Please refer to the linked page.
view full answer... - Installing Frame-Mount Camper Tie-Down On 1984 Chevrolet C/K Pickup Truck
- We do not have a custom tie-down kit for your 1984 Chevrolet pickup but I may have a solution for you.
I called my contact at TorkLift and they told me that you can look under the front of yoru truck bed near the cab and see if you have a 4x4 inch space available, you can install part # TLR3500. You would need to drill through the 4x4 space on your frame to mount the tie-downs for your camper.
For the rear you can use the same tie-downs but you will need the same 4x4 inch space
view full answer... - Will The TorkLift Frame-Mounted Camper Tie-Downs Fit On My Ford F-250
- Yes. The TorkLift Custom Frame-Mounted Camper Tie-Downs # TLR3500 is confirmed for the 1997 Ford F-150 and F-250 Light Duty 8 Foot Bed - without board or step underneath truck bed and with a non-Torklift aftermarket hitch.
The TorkLift tie-downs are designed to be mounted to your frame for better weight distribution and to lower the center of gravity.
Here is a link to our turnbuckles as you will need these if you do not have some already.
view full answer... - Is Drilling Needed on 2011 Ford F-350 Short Bed to Install Front TorkLift Camper Tie-Downs
- I checked directly with TorkLift for you, and verified that you do NOT have to drill into your 2011 Ford F-350 short bed to install the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLF2012.
Then to complete your set up, the correct tie-downs for the rear will depend on if you have a factory hitch on your 2011 Ford F-350 or an aftermarket hitch.
- Factory OEM Hitch: TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear # TLF3006
- Aftermarket Hitch: TorkLift Custom
view full answer... - Custom Rear Camper Tie Downs For A 2005 Toyota Tacoma With Aftermarket Hitch
- If your 2005 Toyota Tacoma is 2WD you can use the TorkLift Custom Frame-Mounted Camper Tie-Downs # TLR3500, or if you have 4WD, you can use the TorkLift Custom Frame-Mounted Camper Tie-Downs # TLR3500.
However, both of these kits will require drilling into the frame, but the 2 Rear tie-down inserts, frame brackets, and necessary hardware is included.
view full answer... - Recommended Camper Tie Downs for 1999 Toyota Tacoma
- For your 1999 Toyota Tacoma, you will want the TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear # TLR3500 to go with the front # TLT2306. This is a confirmed fit for your vehicle as long as you don't have the factory trailer hitch receiver.
You may also be interested in the TorkLift Basic SpringLoad Turnbuckles for Camper Tie-Downs - Qty 2 # TLS9000. The spring loaded barrels minimize the stress on your tie-down points yet are sturdy to allow you to firmly tighten them down.
view full answer... - Rear TorkLift Camper Tie Downs for 2007 Ford F-350 with 8 Foot Bed and Aftermarket Hitch
- For the 2007 Ford F-350 8 foot bed with an aftermarket (but non-TorkLift) hitch installed and no step or board beneath the bed, the correct rear camper tie-down kit is the TorkLift # TLR3500. For the front kit you will use part # TLF2011.
I have attached a sample install video below that you can also check out.
view full answer... - Rear Tie-Down Recommendation for My 2006 Ford F-350 Super Duty
- When determining if rear Torklift tie-downs are available for your 2006 Ford F-350 Super Duty, it truly depends on your bed length, what hitch model you have installed (if any), or if you have a board/step underneath your truck.
For example, if you have a 6-3/4' bed with a non-Torklift aftermarket hitch with a board or step underneath your bed, the rear Torklift tie-downs you would need are the # TLR3500.
In order to determine if any are available for your 2006 Ford F-350, feel free
view full answer... - Recommended Camper Tie Downs for a 2017 Chevrolet Silverado 3500 With an Aftermarket Hitch
- I did some research and it looks like for your 2017 Chevrolet Silverado 3500 you can use the TorkLift Camper Tie-Downs # TLC2220 for the front it you have a 6 1/2' bed or the TorkLift Camper Tie-Downs # TLC2219 if you have an 8' bed.
And for the rear you'll just need the TorkLift Camper Tie-Downs # TLR3500. Finally, you'll just need a set of turnbuckles # TLS9529-2-LK to secure the camper to your tie downs.
view full answer... - Recommended TorkLift Frame-Mounted Camper Tie-Downs for 2007 GMC 2500 With Aftermarket Hitch
- Yes, you are correct. For a 2007 GMC Sierra Classic 2500HD Crew Cab with 6-1/2' bed and Class V Curt Trailer Hitch Receiver, # C15302 installed, the TorkLift Custom Frame-Mounted Camper Rear Tie-Downs, # TLR3500 will fit.
For front, use TorkLift Custom Frame-Mounted Camper Tie-Downs # TLC2205.
view full answer... - Aftermarket Hitches Compatible with TorkLift Rear Camper Tie Down TLR3500
- If your 1999 Dodge Ram 3500 is an 8-foot bed without a board or step underneath truck bed and with a non-Torklift aftermarket hitch, then you will use TorkLift rear camper tie-down kit # TLR3500 that you referenced.
All aftermarket trailer hitch fits for the long bed with standard/step bumper are shown on the linked page. Among these are Class III hitch # 75101 from Draw-Tite, Class IV hitch # 14001 from Curt, and Class V hitch # BWHDRH25132.
view full answer... - How do Torklift # TLR3500 Rear Camper Tiedowns Attach to 2012 Toyota Tacoma
- The Torklift # TLR3500 rear tiedowns would mount to holes drilled in the side plate of your aftermarket hitch. The front tiedowns, part # TLT2303 would mount to the truck frame. If you click the provided links, you an see the installation instructions for both the front and the rear tiedowns.
The video linked showing the # TLR3500 being installed on a 2008 Tundra would also apply to your Tacoma. The tiedowns aren't a completely vehicle specific item, given part numbers will fit many
view full answer...
TorkLift Accessories
Fit to this rack on your 2012 GMC Sierra
Info for these parts were:
Expert Research:
Mike L
Expert Research:
Adam R
Expert Research:
Jeffrey L
Written by:
Lindsey S
Video Edited:
Jacob T
Video Edited:
Dustin K
Video by:
Kathleen M
Test Fit:
Randy B
Updated by:
Wilson B
Updated by:
Michael B
Updated by:
Isabelle B
Updated by:
Amanda K
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Scott
3/24/2023
Still working great after a year. No issues.