Summer Starts Here - Save up to 70%
Part Numbers: TLC2220,TLC3216
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.
Features:
If you're looking for the best tie-downs for your camper, frame-mounted is the way to go. The frame is the most solid part of your entire vehicle, so it just makes sense to attach your camper to something that's not going to warp, bend, or twist. Even more importantly, the camper's center of gravity will sit lower and its weight will be spread across the entire bed. This avoids a top-heavy load perched on top of your bed rails that's liable to sway and get pushed around by crosswinds. The camper's not going to shift or slide around while you drive; it's going to stay put, and your truck is going to handle just like it does without a camper.
Quick Tip: If you have a plastic or spray-in bed liner, it's important that you use a rubber mat under the camper to eliminate any sliding or bouncing.
Frame-mounted tie-downs are also a great pick for preserving your truck's good looks. The brackets install on the frame, tucked nearly flush with the underside of the vehicle. Remove the arms from the brackets when you're not hauling your camper, and the brackets will be barely visible.
Completely custom to your vehicle, the tie-downs attach to exisiting holes in your frame so that there's little to no drilling and no need for any modifications. Because they're custom, you'll want to use our in-house application guide to make sure you get the exact right model. The tie-downs you need might be different depending on what type of hitch or other accessories you have.
Once the tie-downs are installed, use a set of turnbuckles (sold separately) to secure the camper to the tie-downs. The shank on each arm has 2 pin holes so you can choose how far out they extend, that way the turnbuckles can reach the anchors on your camper without making contact with your truck. Tighten the turnbuckles to the correct level of tension (not too tight!).
Make sure the anchor points are offset from the tie-downs instead of lined up with them so that they will hold your camper from multiple angles. This is important for keeping your camper from shifting. Two holes in the attachment plate of the tie-downs let you find the best angle for you camper anchors.
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.
Features:
If you're looking for the best tie-downs for your camper, frame-mounted is the way to go. The frame is the most solid part of your entire vehicle, so it just makes sense to attach your camper to something that's not going to warp, bend, or twist. Even more importantly, the camper's center of gravity will sit lower and its weight will be spread across the entire bed. This avoids a top-heavy load perched on top of your bed rails that's liable to sway and get pushed around by crosswinds. The camper's not going to shift or slide around while you drive; it's going to stay put, and your truck is going to handle just like it does without a camper.
Quick Tip: If you have a plastic or spray-in bed liner, it's important that you use a rubber mat under the camper to eliminate any sliding or bouncing.
Frame-mounted tie-downs are also a great pick for preserving your truck's good looks. The brackets install on the frame, tucked nearly flush with the underside of the vehicle. Remove the arms from the brackets when you're not hauling your camper, and the brackets will be barely visible.
Completely custom to your vehicle, the tie-downs attach to exisiting holes in your frame so that there's little to no drilling and no need for any modifications. Because they're custom, you'll want to use our in-house application guide to make sure you get the exact right model. The tie-downs you need might be different depending on what type of hitch or other accessories you have.
Once the tie-downs are installed, use a set of turnbuckles (sold separately) to secure the camper to the tie-downs. The shank on each arm has 2 pin holes so you can choose how far out they extend, that way the turnbuckles can reach the anchors on your camper without making contact with your truck. Tighten the turnbuckles to the correct level of tension (not too tight!).
Make sure the anchor points are offset from the tie-downs instead of lined up with them so that they will hold your camper from multiple angles. This is important for keeping your camper from shifting. Two holes in the attachment plate of the tie-downs let you find the best angle for you camper anchors.
Average Customer Rating: 4.7 out of 5 stars (3179 Customer Reviews)
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there. Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.I like to thank Lori with etrailer and guiding me through the process of getting , Front and rear,
Torklift Camper Tie-downs -Custom Frame Mounts. Well doing research this was the best way to go for tying down and stabilizing a camper. Torklift camper tie-downs are solid well built!
I had ordered Mounts on Monday and received them on Friday . I Had the tie-downs on my , 2019 Chevy Silverado 2500 by Saturday. The whole process was awesome , real easy installation. Great help with videos and instructions on mounting tie-downs on my truck provided by etrailer. I’m going to use them on my pop-up Hallmark Camper. Thank you for all your help etrailer.
I think it is a great product but expensive. In retrospect I could not do what I wanted with the truck and hitch so I spent the money needlessly. Not any fault of your company. I would have been just as well to leave the stock OEM and not spent the money anyway. Live and learn.
I bought the TLC2220 for a low profile pop up cabover camper which I had for another Chevy 3/4 ton truck. The prior truck utilized a different attachment but was not available for my current 2012 Chevy truck. The TLC220 offers an excellent attachment point that is made out of thick well made steel and covered with a nice black powder coating. The instructions that came with the product should be thrown away. Pictures are poor, verbiage is incomplete and large gaps in the actual application. The saving grace is the video from etrailer. This is a great video. Complete, simple with no gaps and tells you exactly what the difficulties might be. This video even called out the socket sizes. Unfortunately the mate to this; the TLC 3212 rear mounts has a poor video with again gaps in application. And... again the TLC3212 written instructions is just fireplace starter material.
Nice bullet proof set up little tricky to hook up but solid set up
Well made! Heavier material than I even expected. I'm amazed at how well designed they are, and how well they fit.
etrailer.com is the best. Great products and great customer service. I purchased these TorkLift custom frame mounted camper tie downs to be installed on my 2017 Chevrolet 3500 HD Duramax single axle short bed. Installation was easy using the great videos provided by etrailer.com.
Great customer service and products
These tie downs, as well as the TLC3215 set, were easy to install if you have some mechanical ability. They function well with our Lance truck camper and become unobtrusive when you remove the tie down extensions. It's too early to comment on corrosion resistance, but my hope is they hold up well.
Great people and easy to work with great company
I took a long time in writing this review as I wanted to be able to test the product fully. In installing the Tie-Downs, the instructions are pretty vague when it comes to fishing the one bolt through the frame. What is not mentioned is that the position of the large washer that is on the bolt while having to be fitted through the hole makes the difference of getting the bolt through the hole or not. One reviewer said that he had to widen the hole in order to get the bolt through, I too had widened the hole a little, until I realized that it was the washer that was keeping the bolt from going through. The washer needs to be at a 45 degree angle allowing the bolt to be able to gain the extra room against the top of the frame to properly go through the hole. I know this does not sound clear, but what I say will make sense when you are under the truck fishing the bolt through the frame.
That said, after mounting, the Tie-Downs were very secure and all parts looked great. I was worried that the rear passenger side Tie-Down would hit the wide diesel exhaust. It fit perfectly in the space between the exhaust pipe and the frame with no modifications needed, great design and engineering. The Tie-Downs hold my truck camper great, secure and steady. Great product.
The bed mat fit perfectly as well. Exactly what is needed for the truck camper.
I ordered these upon recommendation from a friend. Upon receipt I got three estimates and went to a local body shop. When the owner reviewed the installation booklets, he was impressed by the detailed and thorough explanation and pictures by TorkLift. I do not suggest that one person install these, but it seemed easier with two people. I love that the tie downs can be partially removed during non-use to avoid catching on obstructions to the side of the vehicle. Also, the booklet gave a phone number for technical support in case the installer confronts any problems. The salesperson who helped me at etrailer was very helpful and made sure I ordered the correct items to fit my truck. I have always had good results with etrailer.
I have purchased many TorkLift products from eTrailer, all of which have performed as expected. The installation instructions are thorough and easy to follow. eTrailer product support and customer service is second to none. Thank you for your continued reliability.
These tire downs have held through rough terrain and an accident where the camper was hit from behind. Easy to use for fast on and off of the camper.
TorkLift front anchor design requires fussy installation I could design a more elegant anchor, and have done so for a previous truck; These did not have complete powder coat protection inside the tubes, requiring painting inside tubes to ward off corrosion from inevitable road salt.
Once installed these proved secure and strong, and are superior to HappyJac truck box anchors.
Well made. Salesman provided great insight into the why these are so highly rated. Construction is exceptional. Directions on installation are easy, but watch the video first. Support team is excellent. Would I buy this again & recommend these..absolutely. Now that I own these, i'm always looking at other "rigs" & it's apparent the "word is out" on these. I haven't bought the back tie downs yet...but that's coming!
I’ve owned several truck campers and always use these tue downs. They are the best. Fit is always excellent
Great quality and customer support is on point.
Great product. Fast shipping! And the installation video provided on the page was very helpful. I installed the front and rear myself, in about 3 hours.
Very good product quality with outstanding customer service. Fairly easy to install. Fishing the wire through the frame was a challenge but I used a magnet to capture the wire end to finish the fish through.
Great service, easy installation, even for a worn out Vietnam Veteran. Etrailer youtube video is perfect!
TorkLift frame mounted Tie-Downs installed nicely, and work very well. Travelled across the country and back hauling my truck camper with no issues.
The application took dexterity in fishing bolts/spacers and washers through the frame. That is the price to pay for a drill-less install.
Harry and Harriet Homeowner can install this in their garage without a lift.
The final result is excellent - inconspicuous and strong on our 2015 GMC 3500HD
The application took dexterity in fishing bolts/spacers and washers through the frame. That is the price to pay for a drill-less install.
Harry and Harriet Homeowner can install this in their garage without a lift.
The final result is excellent - inconspicuous and strong on our 2015 GMC 3500HD
As usual ETRAILER sent my camper tie downs safe and sound. After opening the boxes and doing a quick inventory I discovered there was 2 pins missing. A quick call to TORKLIFT and parts are in the mail. Easy installation with clear instructions. You cant go wrong with ordering TORKLIFT products from ETRAILER.
Ask the Experts about this Camper Tie-Downs
Do you have a question about this Camper Tie-Downs?
TorkLift Accessories
Fit to this rack on your 2016 Chevrolet Silverado 2500
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Chevrolet Silverado 2500 Accessories
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.