1978 Jeep Hardware

Do you have any trailer wiring currently? We don't have anything confirmed as fit but if you had a factory 4-way we could convert it to a 7-way with the #37185. The universal 4-way kit part #119250KIT that you referenced could be used to add a…

Hey Ty, what size hitch do you have and how much of an extension do you need? The Curt extension part #C45048 that you referenced fits a 2-1/2 inch hitch and provides a 24 to 36 inch extension.

The first step would be to determine the exact bolt pattern of the wheel. If you click the provided link, you'll be taken to an FAQ article that shows exactly how to do this. Once you determine the bolt pattern, you can compare that information…

The CE Smith #CE27310G spare tire carrier you'd mentioned would work well for your trailer frame. The carrier is compatible with trailer frames up to 4 inches tall and from 1 to 3-1/2 inches wide. The carrier is compatible with wheels with 4 on…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

You were on the right track with the Thule TracRac CapRac Ladder Rack for Camper Shell/Truck Cap #TH29200XT. The Leer 122 High Rise camper shell really isn't ideal for mounting a roof rack, because of the odd shape taking away probably 2 feet of…

The MORryde Trail Kitchen with Stove Tray #MR73QR has a platform that is 25-1/2" long and 15-3/4" wide. The Dometic CFX75 Cooler is 34.92" long and 19.48" wide which is much to large to fit this platform. Of the Dometic Coolers…

There are a couple of differences between the two. The JetStream bars like #Y00425 are made of extruded aluminum while the CoreBars such as the #Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the CoreBar has…

The Valterra RV Water Tank #R8048 can be installed standing up for laying down as is demonstrated in the 2 attached photos. If you have it oriented so that it sits taller the drain plug will already be in a position to drain properly. Should you…

If you are wanting to install the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack #Y01151-58 on a set of Yakima 60" HD Tracks #Y74MR then you will need to use the Yakima HD Track Adapter Kit #Y75RR. Those are needed since you are going to…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Depending on the length of your crossbars and the width of your bed yes, there is a way to mount the Yakima OutPost HD ladder rack system on your utility trailer. What you're going to need are the Yakima HD Tracks, like the 60" #Y74MR, along…