Built for straightforward carrying needs, Inno roof racks with square bars provide a solid, stable base for kayak carriers and cargo boxes. The coated, padded feet and clamps help protect paint when the mounting points are clean, and installation is simple with clear instructions. Square bars can be noisier than aero bars, so weigh that tradeoff and confirm your vehicle's roof rating before loading up.
Yes, they provide a stable platform for common kayak carriers and rooftop cargo boxes. Confirm your carrier or box clamps are compatible with square bars and set the recommended bar spacing for your box. Tighten the clamps and recheck after initial drives; some setups may need a few retightens early on.
Square bars can make more noise as speed increases. Wrapping a cord around the bars can disrupt the airflow and help reduce the noise. If you'll use the rack a lot and want lower drag and sound, consider an aero-style bar from Inno. Mount accessories that break up airflow to help further.
Install is straightforward with door-jamb hooks and a torque tool or knob. Measure bar spread and pad positions carefully before fully tightening; the rubber base may not sit perfectly flat on curved roofs. Recheck clamp tightness after the first few drives. Verify all parts are present, including end caps, before starting.
Plan around a 132 pounds limit at the feet and your vehicle's roof rating, whichever is lower. You're only as strong as the weakest link, so check your owner's manual for the driving load limit. Keep weight centered between the bars and confirm spacing per your accessory instructions.
They're designed to protect your finish when installed on a clean surface. Clean the mounting points before install so dirt doesn't get trapped. The coating and padding on the feet and clamps help prevent scratches, and the custom fit hooks into the door jamb. Re-measure positions before final tightening to keep things aligned.
42 Inch Bar
54 Inch Bar
65 Inch Bar
Filters