Your internet site is very well organized and easy to use...My order was shipped very promptly and included everything I ordered...All in all this was a simple procedure for what can be a complicated order. I would use your company again or recommend you to others. Your selection was broad and your prices fair.
Redarc Trailer Brake Controllers for clean installs
Keep the cab uncluttered with a hidden main unit and a small dash knob that's easy to reach. Redarc controllers self-calibrate, flashing colors while they learn and turning solid blue when ready, and you can press the knob for smooth manual braking. Installs typically mean splicing under the driver dash; some setups plug into a factory connection. If the brake switch causes faults, use the cold side of the brake aux fuse with a mini-fuse buddy.
Yes. If tapping the brake switch triggers a check engine light or a transmission code, route the brake signal to the under-hood fuse box at the cold side of the brake aux fuse using a mini-fuse buddy. On some SUVs, skip the brake light switch and grab the signal at the red wire on the 4-way converter. Test the circuit before finalizing.
Plan to splice the universal harness into the wiring under the driver side dash. If your vehicle only has a 4-way, upgrade to a 7-way before tying in the brake controller wiring. Some platforms changed connectors, so cutting off the unused plug and splicing function for function may be needed.
Redarc gives you a tidy install with the main unit hidden under the dash and a small knob on the dash, so nothing bulky hangs by your knees. Mount the module on a flat surface under the dash. The system self-calibrates; the status light strobes through colors while it learns and turns solid blue when done. Pressing the knob applies the trailer brakes smoothly for emergencies.
Yes, it can work either way. If your vehicle provides a factory connection point for a controller, installation can be plug-in simple; otherwise you'll splice the universal harness under the dash. Verify you have a 7-way at the bumper or plan to upgrade from a 4-way first. Check for safe pass-throughs in the firewall before routing power and brake wires.
Electric
Trailer Brake Controller Parts or Accessories
Filters