Light up campsites, steps, and awnings with RV exterior lights. Options include amber porch lights that attract fewer bugs, weatherproof LED strips that fit awning tracks or stick underneath your camper, and even dimmable strips for dialed-in brightness. Check mounting orientation on fixtures, and be ready to relocate a connector or drill new holes—seal any openings and confirm a solid ground for a clean, lasting install.
Some LED strips are dimmable, while others have a single brightness. Verify dimming in the description. Install is typically straightforward, but small illustrations can be hard to read, so take your time. Clean mounting surfaces thoroughly and allow adhesive to set for better hold.
Check the orientation label before mounting. Some lamps are marked "wall mount only" with an "up" arrow and aren't intended for horizontal/ceiling use. If you're replacing a light under a gooseneck or similar, confirm the fixture is rated for that orientation to avoid issues.
Choose amber if you want fewer bugs at the door. Amber porch lights don't attract as many bugs as clear or white LEDs. If you prefer a brighter, whiter light, go white and plan on more insects when it's on.
It can be a direct swap or you may need new holes if the housing is larger. Check wiring: you might relocate a connector with a 5/16 drill bit, flip the switch orientation, and recrimp the ground for a solid connection. Seal body contact holes with silicone. Verify fastener length; too-short 3/16 rivets (shorter than 3/4") didn't hold on one camper.
They can fit existing awning tracks and be trimmed to length. Check that the strip profile matches your track and whether it has leads on both ends. You may need to solder a pigtail and weather-proof any cut ends. Clean the surface well and let the adhesive set for best hold, including underneath a camper.
Filters