Hardwired RV Exterior Lights from Command Electronics
Clean installs are the appeal here. Command Electronics hardwired RV exterior lights tie into your coach for a tidy, reliable setup. Choose LED or non-LED, with or without a switch or motion sensor, and confirm mounting details like wall-mount orientation, hole patterns, and whether hardware or a sealing gasket is included. Some use black as positive and white as ground, so match your wiring.
Sometimes no. Some lights are labeled "wall mount only" with an arrow showing "up." Check the back of the housing for this note before installing under an overhang or horizontally. If you're replacing a light under a gooseneck or soffit, pick a version rated for that orientation.
Options vary. Some have an on/off switch on the light, and some use motion detection; others rely on an external switch. Confirm the feature you want and note switch placement and boot sealing—add sealant as needed to help reduce moisture issues.
Plan to supply mounting screws and connectors. Some lights did not include screws or wire nuts, and some did not include a sealing gasket. Add a bead of sealant or a DIY gasket to help prevent water intrusion and condensation.
Black is positive and white is ground on these lights. Verify the wire colors on the fixture label before connecting. Turn off power, make solid splices, and protect connections from moisture with sealant or heat-shrink.
They can, but not always. Some replacements lined up perfectly; others needed new holes and sealing of old holes. Check the fixture's footprint and note that the circuit board may sit close to the mounting holes—verify screw placement and adjust as needed.
Courtesy Light
Porch Light
Utility Light
RV Exterior Lights Parts or Accessories
Filters