I like the easy of navigation through the site. It only took me a couple of minutes to place my order. Thank You I will shop this sight again in the future.
RV Exterior Lights by Command Electronics for 12V rigs
Choose Command Electronics RV exterior lights that match your 12V setup. Options include LED or non-LED, porch or security styles, and versions with built-in switches or motion activation, while some courtesy lights rely on an external switch. Check mounting orientation and whether hardware or a gasket is included, since certain lights are wall-mount only and may not come with screws.
Sometimes no. Some lights are labeled "wall mount only" with an arrow showing "up." Check the housing for orientation markings before installing under an overhang or on a horizontal surface. If your old light was ceiling-mounted, verify the new light is rated for that position to avoid moisture issues or poor drainage.
Usually no. Many LED versions use a PCB so the "bulb" isn't serviceable; you replace the whole fixture when it fails. If you want LED specifically, confirm the listing states LED—some options are not LED. If moisture is a concern, add a gasket or seal the edges to help reduce condensation around the LEDs and switch.
Often they do not include mounting screws, so plan to supply your own sheet metal screws. Some lights don't come with a sealing gasket; adding caulk or a homemade gasket helps reduce water ingress. Test-fit first—on a few lights the circuit board can crowd the mounting holes, so be ready to drill new holes and seal the old ones.
Black is positive and white is ground. Verify the wire colors on your specific light before connecting. If you're replacing a courtesy-style light, know that it may not have an internal switch or sensor—the on/off function is controlled by the external switch in your RV.
Courtesy Light
Porch Light
Utility Light
RV Exterior Lights Parts or Accessories
Filters