RV Exterior Lights in Black by Command Electronics
Swap out worn fixtures with black RV exterior lights from Command Electronics. Options include porch, utility, motion-activated, and courtesy lights, so you can match the style and switch setup you need. Confirm mounting details—some lights don't include screws or a gasket—and double-check wiring, as black can be positive and white ground on certain models.
They can be a quick swap when the footprint matches. Check dimensions to cover old holes and confirm wire colors match your RV. If you want an on/off switch on the light, verify that feature before ordering. After mounting, seal the perimeter to help keep moisture out.
Some do not include mounting screws. Have appropriate stainless screws on hand and dry-fit first. Check that the circuit board doesn't encroach on the mounting holes; if it does, you may need to drill new holes and seal the old ones. Confirm lens attachment screws if required.
Some lights do not come with a sealing gasket. Add a gasket or sealant to help prevent water intrusion and condensation. Inspect the switch boot for a good seal and keep an eye out after the first rain. If moisture gets under a switch cover, the light may stay on and the switch could need replacement.
Connect black to positive and white to ground. Verify polarity before powering up to avoid blowing a fuse. Test the light before sealing it to the wall. If the light has a switch on the housing, confirm it clicks and operates correctly before final mounting.
Courtesy Light
Porch Light
Utility Light
RV Exterior Lights Parts or Accessories
Filters