Truck Bed Mats Specs:
Features:
You hit the brakes and feel it - gear sliding in your truck bed. A propane tank rolls, paint cans shift, and now you have a big mess. Tmat keeps everything in place, and when you need something, slide the mat out and grab it without climbing in.
More Information >Videos
for Truck Bed Mats
Help Articles
for Truck Bed Mats
Expert Answers
for Truck Bed Mats
This is a great choice Joe and thanks for reaching out! Weigh Safe True Tow Weight Distribution Hitch #WS49MR would be a good match for your setup. Since your Grand Design toy hauler will have a loaded tongue weight between 1,300 and 1,600 lbs, this…
view full answer...Hey Jacob, thanks for reaching out. The Westin Custom Fit Truck Bed Mat #50-6405 weighs approximately 45 lbs. It'll fit the 2017-2026 Ford F-250 and F-350 with the 6-3/4' bed. What do you usually haul in your truck bed?
view full answer...Hi Hilario, congrats on the new truck! ^___^ If this were my truck and I was installing a retractable cover on it (which I actually did with my Silverado), I would go with the manual RetraxPRO XR Hard Tonneau Cover - Retractable - Aluminum - Matte…
view full answer...Hi Roy, Yes, the 30 Amp Portable Power Watchdog #HU32VR will protect your RV from sustained low voltage as well as power spikes and high voltage. If the incoming voltage drops to 104 volts or below, or climbs to 132 volts or higher, the watchdog face…
view full answer...Hey Ryan, yes the Firestone Air Bag and Compressor kit part #F24XV that you referenced is a confirmed fit for your 2026 Ram 2500 Power Wagon. Are you planning on towing a heavier trailer?
view full answer...Thanks for the information Matt and congrats on your new trailer! For your 12,000 lbs Grand Design Reflection, I recommend the Weigh Safe True Tow Weight Distribution Hitch item #WS24RR for a 2" hitch or item #WS37RR for a 2-1/2" hitch…
view full answer...Hi William, The only B&W locking hitch pin we have is the B&W Trailer Hitch Receiver Lock for 3" Hitches part #BW23FR. However, the shear strength rating of the pin is not published information. The shear strength of the Weigh Safe Hitch…
view full answer...I have a great front coverage solution for you. I confirmed with BedRug that the BedRug Custom Truck Tailgate Mat for Trucks with Bare Beds, Spray-In Liners or Drop-In Liners #BMQ17TG only covers the surface of the bed and tailgate and does not cover…
view full answer...Hey Travis, welcome back! Yes the DeeZee bed mat part #DZ28GJ that you referenced can install over a factory spray in bed liner. Are you trying to keep the spray in bed liner as nice as possible and thats why you want a mat?
view full answer...Hey Tony! Yes, the Weigh Safe True Tow Weight Distribution Hitch #WS37RR is a good choice and would have the proper rating for your setup. The smaller 1.2k TW model is going to be rated too low, or right on the edge, once you factor in propane,…
view full answer...Hi Darren! We are here to help! ^___^ So in your case, absolutely do not trust AI. It's basically just taking what will kind of work for most people and applying it to your situation. However, your situation is much more unique than the typical…
view full answer...Hey David! As long as your 2026 Maverick is a hybrid, the Roadmaster Direct-Connect Base Plate Kit - Removable Arms #RM87NQ is indeed a fit. There are no baseplates for non-hybrid models as only the hybrids are flat towable. These baseplates are a…
view full answer...Filters
- 1 results
Contact and Help
What our customers are saying:
Product arrived very quickly. Everything was there and fit properly. I'm very satisfied.
Greg
Hillsborough, NC