Summer Starts Here - Save up to 70%
# 1
Longview Custom Towing Mirrors - Slip On - Driver and Passenger Side
Simple design and effective Easy to install but my drivers side didnt fit to my mirror good Upper edge was up. Will function, just not quite right
I just wrestled the mirror extensions on. I'm a bit concerned about the 'keeper' screw, it has quite a bit of tension on it. How long am I covered if it breaks? Is it easily available if it does? I'm also not thrilled about the lower edge, it juts down 3/4" past the actual mirror housing. The padding on the bottom of the extensions isn't touching anything, it's about 7/16" - 1/2" from the mirror housing. Please take a look at the pics attached, maybe I have them on wrong...
# 2
K-Source Snap & Zap Custom Towing Mirrors - Snap On - Driver and Passenger Side
Out of the box, the mirrors didn't fit properly. I couldn't get the bottom snaps to fit over the edge like they are supposed to. So, I just used a heat gun to slightly soften that area and expanded it just a little. That did the trick. It takes some effort to unlatch the bottom clip so I'm confident the mirrors will not fall off. It's a good design. The actual reflective part of the mirror is easy to adjust and has a greater range of movement than my last mirrors - the ones that fell off. We are looking forward to getting on the road in a couple of weeks for a real test.
I installed these on my 05 chev, they were hard to get snapped on the bottom so I used a small trim tool to pry them out far enough to hook over the edge. It was 30 degrees out when I was installing them and the did not crack so that is a good product. They vibrate going down the road but still better than not know what is behind the trailer.
# 3
K-Source Snap & Zap Custom Towing Mirrors - Snap On - Driver and Passenger Side
Easy off and on. The fit on my outside rearview mirror is outstanding. Works great with my 24' Thor. The inside edge of the added mirror lines up perfectly with the outside edge of trailer. Very pleased with the product
Out of the box, the mirrors didn't fit properly. I couldn't get the bottom snaps to fit over the edge like they are supposed to. So, I just used a heat gun to slightly soften that area and expanded it just a little. That did the trick. It takes some effort to unlatch the bottom clip so I'm confident the mirrors will not fall off. It's a good design. The actual reflective part of the mirror is easy to adjust and has a greater range of movement than my last mirrors - the ones that fell off. We are looking forward to getting on the road in a couple of weeks for a real test.
# 4
K-Source Snap & Zap Custom Towing Mirrors - Snap On - Driver and Passenger Side
Ford EdgeLow cost way to extend mirrors. Does not interfere with mirror movement at all. Also still keeps turn signal visible. Only removed 1 star as it is easy to scratch the plastic on the edge of the mirror housing facing the window when installing or removing the mirrors.
Out of the box, the mirrors didn't fit properly. I couldn't get the bottom snaps to fit over the edge like they are supposed to. So, I just used a heat gun to slightly soften that area and expanded it just a little. That did the trick. It takes some effort to unlatch the bottom clip so I'm confident the mirrors will not fall off. It's a good design. The actual reflective part of the mirror is easy to adjust and has a greater range of movement than my last mirrors - the ones that fell off. We are looking forward to getting on the road in a couple of weeks for a real test.
# 5
K-Source Snap & Zap Custom Towing Mirrors - Snap On - Driver and Passenger Side
Out of the box, the mirrors didn't fit properly. I couldn't get the bottom snaps to fit over the edge like they are supposed to. So, I just used a heat gun to slightly soften that area and expanded it just a little. That did the trick. It takes some effort to unlatch the bottom clip so I'm confident the mirrors will not fall off. It's a good design. The actual reflective part of the mirror is easy to adjust and has a greater range of movement than my last mirrors - the ones that fell off. We are looking forward to getting on the road in a couple of weeks for a real test.
Works great. They do work with the F150 mirrors that have the turn signals on the outside edge of the mirror. You just can't see the turn signal with the towing mirrors installed. Fit is excellent, no rattling or vibration. Easy 5 minutes installation.
# 6
CIPA Custom Towing Mirrors - Slip On - Driver Side and Passenger Side
I would like it to be extendable a bit further on the passenger side. The driver's side is fine though. The passenger side does not let one see far enough away from the side of the trailer. All in all, I like it better than drilling holes into the doors of my pickup to install huge mirrors. These look way better and are sufficient.
Not long after putting on the truck, the mirror fell off
# 7
CIPA Custom Towing Mirrors - Slip On - Driver Side and Passenger Side
We haven't used them yet while driving the RV, but the fit is perfect! Very happy with these extenders
Really loved my cipa mirrors on my Chevy. The dodge mirrors are tight if you use the right thickness wedge. Problem I have is that if your backing up and want to pan the factory mirror down for rocks or stumps the overhanging lip of the cipa mirror stopes the factory mirror. Will have to grind some off that lip for factory mirrors tilt up or down to clear for the tilt of factory mirror.
# 8
Longview Custom Towing Mirrors - Slip On - Driver and Passenger Side
The price is right and they are definitely secure and not going to fly off. That being said I did add some foam tape to the inside fwd edge for a snugger fit. I do wish the threaded securement piece was about a 1\2 in longer but overall a great mirror for the money.
They were delivered expeditiously, went right on as per the instructions and they are fully adjustable so I can now see both sides of the trailer when straight. It is a 8.5 foot wide enclosed car trailer. All good here.
# 9
CIPA Custom Towing Mirrors - Slip On - Driver Side and Passenger Side
I like these but I would have given them 4.5 stars if possible and I'll explain below. The shipping was fast. They arrived in good shape. Right out of the box the construction didn't inspire confidence, these are lightweight. They slide on horizontally to the OEM mirror & fit snuggly, then a wedge is tightened in place between the tow mirror and the OEM mirror to prevent the tow mirror from sliding back off. The tow mirrors are easy to install and from a short distance look better than some of the other "clamp-on" styles. A plus! I have tried these a couple of times at speeds of up to 80mph (we can do that in Idaho), and yes, I don't plan to tow a trailer that fast but a strong headwind would easily exceed an 80 or 90mph effective speed. (we get that in Idaho too) During the tests they performed well, never loosened, no noticeable vibrations in the view. I was impressed. Overall, I would buy these again and recommend to a friend.
I had the mirrors for about four months and one of the mirrors just fell off was not happy. Obviously it shattered on the ground. The adhesive is very cheap on them called customer service. They sent me out a new one, but was told this happens quite often with those. I think the adhesive Hass to be better.
What our customers are saying:
"In these days of customer "no service" I am usually disapointed when doing business with people I don't know. It was refreshing doing business with you. I'm impressed!"