Most Popular Hanging Rack for 2009 Toyota Prius

This carrier works very well for those situations where a ladder-mounted bike rack is the only option. It took a couple of trials to find the best placement of the bikes on the rack. It would be ideal if the horizontal bars were a little longer so the bikes could be kept further away from the back wall of the travel trailer and separated a little more from each other. Nevertheless this rack works well and I use cut pool noodles and bungies to hold the bikes firmly in position and to guard the contact locations between the bikes, rack and trailer. The cradles can be slid anywhere on the horizontal bar for ideal placement with your specific bikes. It would be good if there was way to hold them in place so they don't move while mounting the bikes or after install. Based on the few times we have used this rack, I would recommend it in a ladder-mounted application.

Click to Enlarge

Click to Enlarge

Click to Enlarge

The bicycle carrier has been great and its design well thought out. Due to the geometry of our bicycles it took us a while the two times to figure out how to hang them with the best balance and minimal overhang with the side of our trailer. Easy to use thereafter, very sturdy and no maintenance.

I needed a small bike rack for my 5th wheel. I came to etrailer as my trusted source for info and availability since we live full time on the road. Plus these are hard to find in brick and mortar stores since COVID. I ordered the rack on a Sunday and received a confirmation and tracking number before I went to bed!! The package even arrived a day early. The rack is more sturdy than I had expected and look forward to safe transport of my bike. I also like I now have the ability to mount and use it on the rear of my pickup if needed. This is a 5 star rack but gets only 4 stars due to my one issue. The only issue was a small amount of what looks like welding slag in the threaded attachment hole to the trailer. (see picture) Having no other option, I just forced/re-threaded the bolt during installation. Since I hope to not need to remove the rack, I am just hoping for the best in the future.

Click to Enlarge

Click to Enlarge

Product is better and sturdier than I expected. I was shocked at how fast it shipped. It was extremely well packaged. I have not seen this type of care in shipping for a long time. I am very happy with the product especially at the price. It had several features I was looking for: 1. It is rigid to the hitch with no flopping. 2. The bikes can be securely locked to the carrier. 3. The unit can easily be locked to the hitch (with the additional locking bolt that I would recommend purchasing. 4. When not in use it can easily be stored FLAT in the storage area of my RV without taking up a lot of room. I would highly recommend etrailer and this bike carrier. I will be doing additional business with etrailer in the future!

Click to Enlarge

Click to Enlarge

This purchase was to have a rack we can use when we need to bring single bikes in addition to or instead of our tandem. We have used it about a dozen times and it has been a great solution. Easy to store and set up and the wheel mount eliminates any issues with having a horizontal frame member to hang from. We've heavily loaded it several times including wedging our bike trailer between the bikes.

Click to Enlarge

This is a lightweight rack that holds the bikes horizontal by supporting them by their wheel rims. Adjusting it for various size bikes is easy. Bikes are well protected. There are pinned split-fit joints at the base that may be susceptible to wear after a lot of use.

This is the best bike rack for a 5th wheel that I have ever seen or used. I have had it for a year now and used it multiple times. We travel for work and my wife follows me in the car, so she can see the bikes on the rack and what they are doing. She says they hardly move at all. It holds them very solid even when going over rough roads, where we see the bikes on the back of other RV's bouncing all over the place.

I combined this with the Mount-n-lock bumper hitch receiver as well as the safety struts bumper reinforcements. We have gone on one of the bumpiest roads and while this thing takes a beating, it does the job. It does a fair amount of bouncing as I see it in the camper rear camera, but I think that’s part of the engineering to let a little absorption of the bounce happen. Overall, great product and I highly recommend. (By the way, don’t forget to do your calculations for the weight of your bikes as they go further away from the inner most part of the bike rack, they weight heavier).

I ordered one of these a year ago and it arrived with critical welds missing. I contacted the manufacturer directly and they sent me a brand new unit. Mounting was easy (with the right tools). I did swap out the crummy fasteners that they supply for attaching to the trailer tongue with grade 8 yellow zinc plated fasteners from [online]. It is holding up great and makes bike carrying super easy. I like that I can see them in the rear view mirror and see if anything is coming loose. I used a cheap bike rack on this and flipped the arms of the rack around rearward to keep the bikes close to the front of the travel trailer. This also allows me to fully open the hatch of my tow vehicle when the bikes are mounted. So overall this is a nice addition that avoids trying to mount anything to the flimsy rear bumper of the travel trailer, although it does add some tongue weight. I am super happy with it so far and it looks nice a year later despite having sat outside 100% of the time.

Click to Enlarge

Click to Enlarge

Click to Enlarge

I was looking for a way to mount a bike carrier on my 2016 Flagstaff Superlite TT. Due to the low ground clearance (14" rims) I couldn't relocate the rear bumper mounted spare underneath travel trailer. Tow vehicle is 2015 Ram 1500 4x2. Settled on the SC Bike Bunk plus Let's Go Aero BikeWing2 mounted as far back on front frame as possible so the bike bunk clears the propane bottle cover and maximizes distance between back of truck and bikes when turning. Success! I also made spacers ( bar stock from Home Depot cut down & painted black. see pic) which raised Bike Bunk up another 3/4" (every little bit helps!). My 26" wheeled bikes have 5.5" clearance above tailgate top. 29er will only have 2.5". No issues on flat ground whatsoever; concern may be up & over curb turning into gas stations with 29ers (not tested yet); 26" bikes no clearance issues experienced at all. Hint: GoAero rack tilts forward so I use trailer electric front jack to lower the whole front of trailer down when loading & unloading bikes. Easy peasy no step ladder. required!

Click to Enlarge

Fits well (but I had to buy a hitch extender to create space between my Jeep and travel trailer) and is very easy to use.

The part came very quickly and did exactly what it said it would do.