# 1
Adapter 4-Pole to 7-Pole and 4-Pole
After one year, the 7-pin adapter has been going strong without any problems.
Worked great.
# 2
Hopkins Endurance Multi-Tow 7-, 5- and 4-Way Flat Trailer Connector - Vehicle End - Ergonomic Design
Works great and etrailer folks did an outstanding job with quick turnaround and communication…thank you!
Exactly what we had been looking for. Now I can hook up multiple trailers with different connectors and all the electrics on each trailer works. I mounted mine directly to the receiver hitch frame. The biggest challenge for us was routing the backup wire from the taillight housing, through the body of the truck to the connector. the rest went together fairly easily. Seems to be pretty solid and looks much better than the loose pigtail connector it replaced.
# 3
Adapter 4-Pole to 5-Pole Trailer Wiring Adapter - Shorter
I put this on my 2016 Kia Sorento. Do yourself a favor and watch this instructional video "Hopkins Trailer Wiring Adapter Installation - 2014 GMC Acadia". Another great tip for my application is to buy an extra 20 feet of 16 guage wire. I ran the wire from the tailgate on the inside of the weather stripping and snaked the wire into the utility tray in under the back flip up compartment. When I need to hook up the adapter - I just run it out of the tailgate and hook it up. This keeps the adapter out of the elements when not in use.
Arrived quickly. I didn’t need to wire the extra lead to my reverse lights because my trailer doesn’t have surge brakes or backup lights. Simply plug and play.
# 4
Hopkins 7-Way RV Style Connector with Molded Cable - Trailer End - 8' Long - RV Standard
Çable good but after putting new 7way plug on truck cable wire colors did not match etrailers picture
7 pin connector separated from cable. I was expecting that "Molded Cable" meant that the connector was fused to the cable insulation but instead, the two separated almost immediately after I installed it. It still works fine as the wires are connected securely inside the connector but with the outer covering pulled out like this, I don't think it will last very long.
# 5
Adapter 4 Pole to 6 Pole and 4 Pole Trailer Wiring Adapter
This adapter really cleaned up the installation and connected directly to the wiring harness. Maybe added an additional 20 mins to install this adapter but totally worth the time and money.
II use it on my towed vehicle behind the motor home. It allows me to take motor home power to a trickle charger in the towed vehicle and connect to the towed vehicle wiring. The four prong receptacle provides outlet to be used if there is ever in need for a four prong fitting good.
# 6
Hopkins Endurance Multi-Tow 4-Way Flat to 7-Way RV Trailer Adapter w/ 4-Way Vehicle End Plug
Really easy to install. Plugs right in to the flat four wiring. I found a decent spot to mount the bracket and finished the installation. 5 minutes max. At this time I didn’t have to wire up a brake controller. That’s going to be a project for a different time. I would definitely recommend this product.
Worked out pretty good. Had a hard time figuring out just how to attach it. I ended up just zip tieing it. It was a life saver that I could pull the rear plug apart. Made it possible to slide part of the harness thought a tight hole.
# 7
6-Pole Square Trailer Wiring Connector Kit (Car and Trailer Ends)
Bullet-proof connector, if not the most elegant. Used in my case for custom "adventurization" wiring on my 2007 BMW F800ST motorcycle, now just road tested this late summer - early fall 2017 on a three month, 18,000 mile loop out of Chicago through the Arctic & Pacific Northwest, including the Dempster & Dalton Highways. Had a custom wiring harness that had to be able to be removed in order to get at the engine, hence the need for the connectors. A few photos should be attached.
This is a product that I needed for my project, but was not easily found and available. etrailer.com not only had the product, but had it at a great price. Shipping was very fast and free for the amount I ordered. Overall, this was a great shopping experience. I made a bulk order of 16 as I am manufacturing trailers that are towed behind motorcycles. This product gives me the six conductors that I need in a very small package, which is great due to the size of motorcycles compared to cars or trucks. The only thing that could be improved with this product would be if they came with dust caps for each connector, or at least one for the vehicle side to prevent dust and moisture intrusion while the trailer is not in use. Keep up the excellent service and selection.
# 8
Hopkins Endurance Quick-Install Trailer Connector Adapter - 4-Way Flat to 7-Blade
It took awhile to receive my order, but I was informed by e-mail and was kept informed when I should expect delivery. Luckily, was in no rush, so I would reply and wait for an update from you. i received the connector in good condition. Thank you!
Installation went well and works fine. Only issue was the screws included with the product were not the right ones so had to replace which wasn't a big deal.
# 9
7-Way Molded Trailer Wire Connector, 4' Long
When I ordered this harness I thought I was getting a standard 7 way for a conventional trailer with brakes. What I actually got was a harness made for a camper/RV hook up. The wires have all the colors you would expect but all the lights/turn signals are coded into the plug completely different. After spending a good deal of time carefully matching, soldering and heat shrinking all connections to my new trailer harness, I was very dismayed to find only the brakes actually worked. After a bit of research I found a schematics page on the etrailer site and discovered the problem. As this is a molded plug I could not take it apart and just reposition the wires inside the plug. Another full hour or more of rewiring followed and now all is well. The harness itself is of very good quality but was not labeled/identified properly. This could have been prevented if etrailer would clearly label this harness as a camper/RV harness only.
This is definitely a good quality molded cord for the money. Route and wire this cord into a good quality junction box and you will be on your way to having some excellent trailer wiring.
# 10
48" Long 4-Pole Loop with Cover
The items I ordered will allow me to adapt my utility trailer for transporting my sea kayaks. Curt and Hopkins are both quality manufacturers. On a shipping note, the box arrived at the Post Office broken wide open. Your shipping folks need to wrap small, heavy, items in bubble wrap. Then stabilize it with foam peanuts. Just putting it in a box then stuffing the box with craft paper does not cut it. Items were not damaged so I am good to go.
I have now installed the following on my 2017 Wrangler: Brake light relay kit . Hopkins Towed vehicle Tail Light wiring kit. Blue Ox base plate. Blue Ox Patriot Portable RF Braking System. All of this has taken about 3 days of work spread out over a week or so. Overall it went well. Not too many surprises. Crawling around under a car at 71 is a bit of a strain but I'll get over it. I must say that Donna P. has been a wonderful source of great information and has stayed right on top of the process. eTrailer has been a great source for this project. I would recommend you all with no hesitation.
# 11
Hopkins Endurance 5-Way Flat Trailer Wiring Kit - Vehicle and Trailer Ends - Ergonomic Design
etrailer is the only place I could find this item. It is much higher quality than other flat connectors, with weather covers and big finger/thumb grips to actually hold onto the connectors and easily separate them. I used the 'trailer' end in my adapter unit.
The female connector is attached to the swing arm of a motorcycle to provide lighting lighting for a trailer pulled by the motorcycle. This means that there is likely much more movement in the harness than for an automotive application. I've never had a problem with any part of the harness. I found this product to be exactly what I wanted, well made and easy to install. The protective cap functions well as it remains pliable (flexible) after a year of use, and while it has never fallen off in use, it is easy enough to remove before making the connection. It has done the perfect job of keeping mud and other detritus out of the contacts. The recessed nut holders also function well and is one of the reasons I chose this wiring kit. This wiring kit gets high regard and recommendation from me. All of my purchases from etrailer have been solid products delivered at reasonable cost.
# 12
7-Way Molded Trailer Wire Connector - 3' Long
I've had this in use for over a year and they don't build them like they use to. I use this on a gooseneck trailer and the piece of plastic behind the spade connector for the clearance lights and brakes has melted, allowing the spade connector to lose contact with the plug on the pickup. So the lights would cut off in the middle of the night and would have to wiggle the connection till I could fix it. I have an older Hopkins plug and never had this problem. To fix the problem I ended up putting pieces of thin copper wire behind the spade and have done it twice since the plastic melted a 2nd time and once again the trailer clearance lights would quit working. Attached are before and after pictures.
After a year doing its job well.
# 13
Hopkins Endurance Quick-Fix Replacement 4-Way Flat Trailer Connector w LED Test Lights - Trailer End
Nice product & good value imo--it's very beefy and appears to be heavy duty---I know these are supposed to be temporary---that said this one replaced a Reese connector connector exact same style w/LEDs that was almost 17 years old before it failed--hopefully this lasts even close to that amount of time--I don't use this trailer daily usually not even weekly---so maybe with commercial trailer use this connector isn't for you..... It's my considered opinion that many of the fails are the result of a lousy install or someone disconnecting by pulling on the harness INSTEAD of grabbing the connector either way this gets an A+ from me
This is perfect. I needed an easy way to change the connector on the trailer I'm working on. It was an old pop up camper with an 8 pin connector mounted on the frame. but I only needed a 4 after rewiring it. So, out with the old and in with the new! Plus it's really easy to connect all the wires. Picture is not of the new connector but of the whole project I'm working on. I've since mounted all the running lights, tail lights etc.
# 14
Hopkins Endurance 5-Way Flat Trailer Connector - Trailer End - Ergonomic Design
The product arrived in a timely manner and undamaged. I have not used this 5 pole adapter yet, but the 4 pole adapter I previously bought from etrailer years ago is still working great. I have no reason to doubt that this adapter will function equally well. I appreciate the good products and customer service from Etrailer.
I needed the extra wire to run for multi-led lights mounted underneath the steps at the rear of my trailer, when in reverse trailering. This connector seems heavier-duty compared to many on the market and so far is still working well after a year or more. As with most products from etrailer, I haven't been let down yet. Here's a real special GOTCHA moment I had recently; My trailer jack stand, which I had purchased from my well-known and popular local trailer company to replace my original had rusted to pieces. I needed a replacement quickly and trusted I'd get a decent product and price as had been the norm over many years. Anyway, I purchased the new jack and wheel and brought them home to install myself. Upon taking the jack out of the bag it came in, I noticed a sticker from etrailer, yea. Before installing I went online, saw that my jack was less than half the cost I'd just paid, and realized I should have purchased the jack when I had originally shopped online at the start of this replacement process. I could have returned my over-priced items but decided I didn't have the time due to procrastination. I decided they could keep their extra profit on this purchase but I won't get fooled again and my local shop has lost my trust.
# 15
Adapter 7 Pole to 4 Pole with Tester and Cover
The product worked as it should. I really enjoy the built-in tester. I recommend this product. Shipping was fast.
ETrailer had exactly what I wanted at a fair price. Website was easy to navigate and purchasing was simple. Shipping was fast and I was kept notified right up to when I received my order.
# 16
Hopkins Knockout Adapter for 4-Way Flat Trailer Connector
I am very pleased with the products and service provided by etrailer.com. The 4-way Curt trailer hitch wiring connector and Hopkins Adapter for my 2015 Honda Pilot were easy to install with the clear and well illustrated directions. They are performing as advertised with no additional troubleshooting required. The quality suggests that they are durable and will last for at least as long as I own the vehicle. I currently tow boat trailers. The car came with the OEM trailer tow bar (hitch) and basic internal trailer wiring. The etrailer.com parts were just what I needed to complete the package. [I suggest you include a note to install the provided 10A blade fuse in the holder on the S3 harness in the installation instructions]
Worked perfectly. Unfortunately ran into a deer two months ago and.dont have the vehicle now
# 17
Hopkins 6-Way Connector with Jacketed Cable - Trailer End - 8' Long
The plug was missing the set screw and collar that compresses on the cable to prevent strain on the connectors when removing the plug. You can see the set screw clearly in the product picture.
I like this style of plug because it is molded and is important in keeping water out of the plug. It is conveint because it has the right colored wires. I have a water tight termination box with studs that it is wired into. Once I damaged the cable so I opened up the terminal box installed eyelet lugs on the spare pigtail, and installed it in a fiew minuets. I keep a spare on hand with lugs on it so if I have an accident I can quickly replace it. I also use these on some of my smaller tow behind equipment. that's why I like this size plug it isn't real bulky.
What our customers are saying:
"Thanks for my order super fast shipping quality excellent. will order again. thanks again. A+A+A+ to deal with."