# 1
Surco 2 Bike Carrier for Vans and RVs - Ladder Mount
This carrier works very well for those situations where a ladder-mounted bike rack is the only option. It took a couple of trials to find the best placement of the bikes on the rack. It would be ideal if the horizontal bars were a little longer so the bikes could be kept further away from the back wall of the travel trailer and separated a little more from each other. Nevertheless this rack works well and I use cut pool noodles and bungies to hold the bikes firmly in position and to guard the contact locations between the bikes, rack and trailer. The cradles can be slid anywhere on the horizontal bar for ideal placement with your specific bikes. It would be good if there was way to hold them in place so they don't move while mounting the bikes or after install. Based on the few times we have used this rack, I would recommend it in a ladder-mounted application.
The bicycle carrier has been great and its design well thought out. Due to the geometry of our bicycles it took us a while the two times to figure out how to hang them with the best balance and minimal overhang with the side of our trailer. Easy to use thereafter, very sturdy and no maintenance.
# 2
Lets Go Aero NEO2 Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Wheel Mount
This purchase was to have a rack we can use when we need to bring single bikes in addition to or instead of our tandem. We have used it about a dozen times and it has been a great solution. Easy to store and set up and the wheel mount eliminates any issues with having a horizontal frame member to hang from. We've heavily loaded it several times including wedging our bike trailer between the bikes.
This is a lightweight rack that holds the bikes horizontal by supporting them by their wheel rims. Adjusting it for various size bikes is easy. Bikes are well protected. There are pinned split-fit joints at the base that may be susceptible to wear after a lot of use.
# 3
Stromberg Carlson Bike Bunk Trailer-Mounted Bike Rack Carrier for A-Frame Trailers - 2"-100 lbs
I ordered one of these a year ago and it arrived with critical welds missing. I contacted the manufacturer directly and they sent me a brand new unit. Mounting was easy (with the right tools). I did swap out the crummy fasteners that they supply for attaching to the trailer tongue with grade 8 yellow zinc plated fasteners from [online]. It is holding up great and makes bike carrying super easy. I like that I can see them in the rear view mirror and see if anything is coming loose. I used a cheap bike rack on this and flipped the arms of the rack around rearward to keep the bikes close to the front of the travel trailer. This also allows me to fully open the hatch of my tow vehicle when the bikes are mounted. So overall this is a nice addition that avoids trying to mount anything to the flimsy rear bumper of the travel trailer, although it does add some tongue weight. I am super happy with it so far and it looks nice a year later despite having sat outside 100% of the time.
I was looking for a way to mount a bike carrier on my 2016 Flagstaff Superlite TT. Due to the low ground clearance (14" rims) I couldn't relocate the rear bumper mounted spare underneath travel trailer. Tow vehicle is 2015 Ram 1500 4x2. Settled on the SC Bike Bunk plus Let's Go Aero BikeWing2 mounted as far back on front frame as possible so the bike bunk clears the propane bottle cover and maximizes distance between back of truck and bikes when turning. Success! I also made spacers ( bar stock from Home Depot cut down & painted black. see pic) which raised Bike Bunk up another 3/4" (every little bit helps!). My 26" wheeled bikes have 5.5" clearance above tailgate top. 29er will only have 2.5". No issues on flat ground whatsoever; concern may be up & over curb turning into gas stations with 29ers (not tested yet); 26" bikes no clearance issues experienced at all. Hint: GoAero rack tilts forward so I use trailer electric front jack to lower the whole front of trailer down when loading & unloading bikes. Easy peasy no step ladder. required!
What our customers are saying:
"Thank you. The order was received in good condition. I have ordered from you several times and have been extremely pleased with your service and products. Thank you for being such a great business! Kevin"