# 1
Dexter Nev-R-Adjust Electric Trailer Brake Assembly - 10" - Right Hand - 3,500 lbs
Excellent. Be sure your axle bearing seals are not leaking grease onto the backing plate.
Brakes work great! I used a self tapping screw to ground the brake to the trailer. This worked really well and I didn't need to run a ground wire. The studs needed a trip to the hardware store to get some 7/16 by 40 pitch (fine thread) nylock nuts. All in all a nice brake setup.
# 2
Dexter Nev-R-Adjust Electric Trailer Brake Assembly - 10" - Left Hand - 3,500 lbs
Etrailer is great. I have been using them since 2014 or 2015 for various stuff. This order was for electric Dexter brakes - ten inch. Some other suppliers offer similar ones for half price but they are not as good as Etrailer. Auto-adjust (they call it Never-adjust) is very important. Also the shoes are cut nicer. One of the electromagnets failed - open circuit - first time that happened. I had 6600 miles on it. Curious failure. Recommended changeout is 12,000 miles anyhow so I am not real upset. When you're flying down a 9% grade in the Rockies you want the best brakes and the best tires. Get Etrailer. Get the largest wheel and highest load range tires that will fit your trailer from Etrailer. I considered modifying the brakes to disc. $2000 plus they are not maintenance free either. Nothing is "maintenance free". I could change out all the brakes and drums 7 times for that $.
This is what you want. Do not cheap out. At first, I took my trailer to a trailer shop and specified American parts and told them to replace my brakes. They put no brand Chinese crap in my trailer and on my first trip in the rain I totaled my truck and damaged, my trailer and track car all because the brakes did nothing. So I bought the Dexters from Etrailer, put them in myself, and now the rig stops beautifully.
# 3
Dexter Electric Trailer Brake Assembly - 10" - Left Hand - 3,500 lbs
The brake assemblies were in relatively good condition when received except for the actuator wires into the backer plate. The insulation on these were damaged presumably by a tool when inserted the associated strain relief. I repaired this with some RTV. Also, this was my first e-brake job and I was not impressed with Dexter customer support - non-existent.
Exactly what I was looking for. Made in USA and perfect fitment
What our customers are saying:
"Easy place to shop. Fast delivery and great products. Very happy with my purchase."