bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about RV-Washer-and-Dryer


  • Can Solar Power Be Used For Powering a Gaming PC and Washer/Dryer On a Jayco Eagle RV?
  • While you could add enough solar power with the Solar Kit # 34282184, some additional Panels # 34282182 and Batteries # GP99QR. This is only typically going to provide enough power to run your smaller electronics and your PC. The larger appliances like a washer/dryer and air conditioner just draw so much power you would need to have a large battery bank with several batteries and a large solar array to provide enough power for everything. It is more reasonable to use a Generator # CH44FR...
    view full answer...

  • Recommended Washer and Dryer Combo for an RV
  • Hey Robert. What specific information are you looking for on the GE Appliances RV Washer/Condenser Dryer Combo item # GE62FR? The GE Appliances RV Washer/Condenser Dryer Combo item # GE62FR runs off of a standard 120V outlet. It's pretty small and compact as it measures 33 1/4" tall x 23 7/16" wide x 25 5/8" deep. It only weighs 183 lbs and does not require a vent.
    view full answer...

  • Can The Excel RV Tankless Water Heater Be Mounted In A Travel Trailer Washer And Dryer Closet
  • The Excel RV Tankless Water Heater # EX93FR requires 3" of clearance on the sides and 8" of clearance above to allow for proper airflow. If your closet has enough room to allow for these clearance requirements then you can definitely mount it in there.
    view full answer...

  • Covercraft Front Seat Cover Set for 2019 Ford Explorer
  • I understand your question about the Covercraft SeatSaver Custom Seat Covers # SS2501PCSA since we do not indicate a quantity of 2 in the specs. We note that the product is a "Complete front seat kit" but saying "set of 2" would certainly make things more clear. These washer-and-dryer-safe covers are confirmed to fit the two front seats in your 2019 Explorer as long as they resemble the general design shown in the linked diagram.
    view full answer...

  • Will the JT Strong Arm Stabilizer Kit Stop My 5th Wheel From Rocking While The Washer Is Going?
  • Yes, the JT's Strong Arm Jack Stabilizer Kit for Travel Trailers # LC191025 will work great in adding more stabilization to your 2022 Rockwood 2881S so that when your washer is running your trailer isn't jumping around. This kit includes 6 stabilizer tubes so you will use 4 in the front, and 2 for the rear, will telescope to fit perfectly with any application, and securely locks in place with a simple twist of the handle. I have attached both a review and install video for you to check...
    view full answer...

  • Wireless Observation Camera Option for 2018 Keystone Raptor TS355 with Malfunctioning Camera Wiring
  • The specific location of the wiring for the OEM camera on your Keystone Raptor would best be found by contacting Keystone with your 5th wheel's VIN. But even checking with the trailer manufacturer may be a long shot since wire colors and exact placement during production is not the kind of thing that would typically be written down in their specs; and it could even depend on the specific workers that built your RV. We have no way to look this up for you, sorry to say. You might be able...
    view full answer...

  • Does 2015 GMC Sierra Diesel Have Towing Capacity for Grand Design Solitude 373FB
  • You'd be fine. The max your trailer can weigh is 16,800 lbs and the max your truck can tow is 16,900 lbs so as long as you stay under the capacity of your trailer your truck will be totally fine. The Companion fifth wheel hitch part # BWRVK3500 is the way to go for a hitch as well as it's widely considered to be the best option around based on how well it's made and how easy it is to use. To install this in your 2015 GMC Sierra all you need is the part # BWGNRK1012 and you'd be set.
    view full answer...

  • Troubleshooting RV Sink Faucet that Leaks Water at Connections
  • Hey Lavanda, sorry to hear about the sink connections leaking. I've had a similar problem with shower heads and I've found that normally this is due to a lack of plumber tape on the threads and/or the connections not being super tight like they need to be.
    view full answer...