Filter Questions and Answers:

reset filter

Expert Answers about Ladder Racks


  • How To Carry Two Kayaks Using A Retrax XR Tonneau Cover With Tracks
  • I have the perfect option for your to carry two kayaks atop the Retrax XR Tonneau Cover on your 2019 Dodge Ram 1500. For this, I recommend the Yakima OverHaul HD Adjustable Truck Rack part # Y01151-58 with the Retrax XR Tonneau Cover Adapter Kit for Yakima OverHaul HD part # Y01155. This option will allow you to position the kayaks up over the cab that way you can evenly support them on both crossbars which eliminates the need for a rear load extender. This option will also be the most...
    view full answer...

  • Will TracRac Sliding Ladder Rack Fit with Retrax PRO MX Tonneau Cover on 2017 Chevy Silverado 2500
  • The TracRac sliding ladder rack # TH43002XT-781 has rails that mount to the tops of the bed sides on your 2017 Chevy Silverado 2500. Those rails are meant to be in contact with the bed rails. Technically you could install it over Retrax Pro MX cover # RT80466 or the motorized version # RT90466 but I cannot guarantee everything would work as it should or that a warranty or two wouldn't be voided. The only set up we know for sure will work is the ladder rack # TH43002XT-781 with the BAK...
    view full answer...

  • Recommended Ladder Rack Compatible With Deck Rail System On 2017 Toyota Tacoma
  • MaxxTow Truck Bed Ladder Rack w/ Load Stops - Aluminum - 400 lbs # MT70423 will fit ONLY if you don't have the Deck Rail System. There is not an adapter kit available for this product to be used with the Deck Rail System. If you have the Deck Rail System, I recommend the Rola Haul-Your-Might T3 Truck Bed Ladder Rack - Aluminum - 800 lbs # 59799 as well as the Eye Bolt Tie-Down Kit for Rola Haul-Your-Might Truck Bed Ladder Rack - Steel - Qty 4 # 59796 or the Load Stops for Rola Haul-Your-Might...
    view full answer...

  • Installation of Base Rails for TracRac SR Sliding Ladder Rack on 2018 Chevy Silverado 1500
  • The Thule TracRac SR Sliding Ladder Racks that fit your 2018 Chevy Silverado 1500 will install directly in the stake pockets of your truck. All you need to do is appropriately line up the base rails with the stake pockets. Your 2018 Silverado does have to use the included adapter for the rear stake pocket, as you can see by the accompanying cut out of the instructions. You will need to use that adapter and the existing hole at the rear of your truck bed to tighten the bolt. The front...
    view full answer...

  • What Ladder Rack will Work with the BAKFlip MX4 Hard Tonneau Cover on a 2018 Ford F-350
  • I do have options for you but the Thule TracRac SR Sliding Truck Bed Ladder Rack part # TH43003XT-000 won't work with the BAKFlip MX4 Hard Tonneau Cover part # BAK48331 on your 2018 Ford F-350. The reason for this is because the uprights on the ladder rack are angled inward and the folding slats on the MX4 would come into contact with the uprights when lifted. You may be able to open the first slat if you moved the rear upright all of the way forward but this is surely not ideal. Instead,...
    view full answer...

  • Ladder Rack and Tonneau Cover Recommendation for 2018 Ford F-150 5-1/2 ft Bed
  • You are on the right track. The only way to fit a tonneau cover and ladder rack in a truck like your 2018 Ford F-150 5-1/2 foot bed will be a Sliding Thule TracRac # TH43002XT-508 plus a Bak Revolver part # BAK79329. I attached a picture that I took from the install instructions that shows how the rails attach to the stacke pockets for you to check out.
    view full answer...

  • What Kayak Carrier will Fit the Thule TracRac SR Sliding Truck Bed Ladder Rack
  • I do have options for you depending on how many kayaks you need to carry but the Thule The Stacker part # TH830 will not fit the Thule TracRac SR Sliding Truck Bed Ladder Rack part # TH43002XT-501 because the crossbars on the TracRac are much larger (4-1/8" wide x 1-3/4" tall) than that of a standard crossbar. However, we do have kayak carriers that will fit the TracRac because they use the track mount system which is the same on the TracRac as most other manufacturers. I have attached...
    view full answer...

  • Ladder Racks for 2018 Toyota Tundra with Deck Rail System
  • We can help you with a ladder rack for your 2018 Tundra that has the deck rail system no matter which bed length it has. We have racks to fit the 5-1/2-foot, 6-1/2-foot and the 8-foot long bed models. If you have the 5-1/2-foot bed I suggest the Rola Haul-Your-Might T3 Truck Bed Ladder Rack # 59799. This rack mounts directly in your deck rail system and it offers an 800-lb weight capacity. This option is a great value. But if you have the 6-1/2-foot or 8-foot bed then you can use...
    view full answer...

  • Recommended Over the Cab Ladder Rack for a 2018 Chevrolet Silverado 1500 with Removable Rear Bar
  • Yes, the rear bar on the Erickson Over-The-Cab Truck Bed Ladder Rack part # EM07707 can be removed without disassembling the entire rack. However, it is not easy to do so because there are 3-4 bolts per side as you can see in the attached photo. Also, you cannot drive with the rear bar detached because it plays too much of a part in the overall stability of rack. Instead, I recommend the Buyers Products Over-The-Cab Truck Bed Ladder Rack part # 3371501150. As you can see in the attached...
    view full answer...

  • Will the Thule TracRac SR Work with the BAKFlip MX4 on a 2018 Ford F-150 5-1/2 Foot Bed
  • I do have some options for you but the Thule TracRac SR Sliding Truck Bed Ladder Rack part # TH43002XT-508 and the BAKFlip MX4 Hard Tonneau Cover part # BAK48329 are not a good fit. The rails on the SR are rather wide so they would likely overlap with the seals on the MX4. In addition to this, you would need to move the rear rack forward in order to fold the cover up each time and with continuous use the seals on the cover will wear out. The only tonneau cover that we know for sure works...
    view full answer...

  • What is The Difference Between the Adarac Pro and Adarac Aluminum Truck Bed Ladder Rack
  • There are two main differences between the Adarac Pro Series Custom Truck Bed Ladder Rack part # A4000948 and the Adarac Aluminum Series Custom Truck Bed Ladder Rack part # A4001223. This being the shape of the uprights and the dimensions of the crossbars. The crossbars included with the Aluminum Series are 66" long and the crossbars included with the Pro Series are 72" long. The other major difference between the two racks is that the Pro Series has vertical uprights that will allow for...
    view full answer...

  • Compatibiliy of the TruXedo Titanium and Adarac Ladder Rack on a 2014 Toyota Tundra with 6-1/2' Bed
  • Although we currently don't carry the TruXedo Titanium (as of May of 2018), it does look like it installs completely inside the bed rails of your 2014 Toyota Tundra. If this is the case then you should be able to use an Adarac truck bed ladder rack as they install on top of the bed rails only, but they haven't been tested together so I cannot guarantee a fit. Please note that out of the available options I recommend going with part # A4001670 or # A4001671 aluminum options over the...
    view full answer...

  • Recommended Ladder Rack and Tonneau Combination for 2017 Chevrolet Silverado 2500 Short Bed
  • Combining a ladder rack and tonneau cover can be tricky. Not only do they need to install together but they need to be able to be used together. Luckily I have a solution. The TracRac SR Ladder Rack # TH43002XT-781 installs into the stake pockets of your 2017 Chevrolet Silverado 2500. The tracks are on top of the bed rails and easy to remove when you don't need it. Since it installs on top of the rails you'll be able to use a tonneau cover that sits inside the rails. The best...
    view full answer...

  • Recommended Roof Rack for 2000 Viking 2485st Pop-Up Camper
  • I was able to find that your 2000 Viking 2485st pop-up camper is 23 feet 10 inches long by 7 foot 1 inch wide. We have a couple options for your trailer. You can use the SportRack Pop-Up Camper Roof Rack - Square Crossbars - Steel # SR1020 or the Swagman Roamer LT Roof Rack for Pop-Up Campers and Camper Shells - Steel - 7' Long - 150 lbs # S80510. Another option is to mount tracks for the adjustable sliding crossbars to give you more fit options. For this I recommend the Rhino-Rack...
    view full answer...

  • Replacement Upright for Thule TracRac TracONE Ladder Rack
  • I have attached a parts breakdown of the Thule TracRac TracONE Ladder Rack part # TH27000XT-EX. Can you please tell me exactly which part(s) you are referring to? If you just need a single upright post then you can use the Replacement Modular Upright part # 8523446001. However, if you need the entire (1/2) rack then you will also need the following: G) Replacement Modular Upright part # 8523446001 (2) C) Replacement Modular Saddle part # TA8523444001 (2) H) Replacement Modular Base...
    view full answer...

  • Will the TracRac SR from a 2003 Ford F-150 Fit a 2018 Ford F-150 with the 6-1/2 Foot Bed
  • Yes, the Thule TracRac SR Sliding Truck Bed Ladder Rack part # TH43002XT-501 will fit both a 2003 Ford F-150 (excluding stepside) and a 2018 Ford F-150 (excluding cargo management system) with the 6-1/2' bed. I have attached an install video for you as well as a photo which shows exactly how to attach the base rails to the bed sides. Due to the age of the system you have now, I recommend replacing the hardware with part # TAHD-21000-A and the rubber blocks with part # TARB-11032-1 (4).
    view full answer...

  • Will Thule TracRac SR Sliding Ladder Rack Fit with Tonneau Cover on a 2014 GMC Sierra 1500
  • Yes you can! The Thule TracRac SR Sliding ladder rack is one of the few ladder racks we carry that will allow you to install certain tonneau covers on your truck as well. If your pickup is the 2014 GMC Sierra 1500 that you put into the vehicle selection then the correct TracRac SR for you would be part # TH43002XT-782 for a 5-1/2' bed, part # TH43002XT-781 for a 6-1/2' bed, or part # TH43002XT-780 for an 8' bed. My favorite tonneau cover to recommend is the BAK Revolver X2. This is...
    view full answer...

  • Modifying the TracRac SR Sliding Truck Bed Ladder Rack for 2018 GMC Canyon with 5 Foot Bed
  • I reached out to my contact at TracRac and the Sliding Rack # TH43002XT-783 has not been confirmed to fit on a 5 foot bed, so even though there is a very good chance it would work with the minor modifications you mentioned, it would void the manufacturer's warranty. They will not cover any modifications. For a confirmed fit, you can use the fixed mount TracRac TracONE Truck Bed Ladder Rack # TH27000XT-EX or the Pro2 # TH37002XT.
    view full answer...

  • Roof Rack for 2018 Chevy Equinox without Factory Raised Side Rails
  • For your 2018 Chevy Equinox, I recommend the Rhino-Rack RVP Roof Rack for Fixed Mounting Points # RRRVP49. This will use the factory fixed mounting points and will not use the clips that come down into the door frame. It will look like it came from the factory but you will have the T-slots and locks that would not come with a factory roof rack. I've attached the installation details to assist. If you prefer the aftermarket look while still utilizing these mounting locations, then...
    view full answer...

  • Will The Thule Hull-A-Port Work With The Thule Xsporter Pro
  • In order to mount the Thule Hull-A-Port Kayak Carrier w/Tie-Downs part # TH834 to the Thule Xsporter Pro Adjustable Height Truck Bed Ladder Rack part # TH500XT on your vehicle, you will want to use the Watersports Adapter for Aeroblade/Aeroblade Edge Bars part # THXADAPT11 as confirmed by Thule.
    view full answer...

  • Which Ladder Racks Will Work With The BAK Revolver X2 On A 2018 Ford F-150 Short Bed
  • I do have an adjustable truck bed ladder rack for you in the Thule Xsporter Pro Truck Bed Ladder Rack part # TH500XTB but unfortunately as this will clamp onto the inside of the bed rails it will not work with any tonneau cover which includes the BAK Revolver X2 Hard Tonneau Cover part # BAK39329. However, I do still have other ladder racks that will work with the Revolver X2 and I have attached those for you below. Adarac Custom Truck Bed Ladder Rack - part # A70490 Adarac Aluminum...
    view full answer...

  • Recommended Tie-Down Loops for Thule TracRac TracVan ES Van Ladder Rack
  • In order to add tie-down loops to your Thule TracRac TracVan Ladder Rack # TH29611XT, I recommend the Rola Eye Bolt Tie-Down Kit # 59796. While these tie-downs are designed specifically for use with the Rola truck bed ladder racks, we have found that they are also compatible with the T-slots on the Thule crossbars. This kit includes 4 tie-down loops and the needed hardware. The Aluminum Shim Kit # TH29700 that you also referenced is designed for use on vans that have curved rain gutters...
    view full answer...

  • How To Carry Two Kayaks On a 2017 Ford F-350 Short Bed Over a Tonneau Cover
  • I have a few systems that you can use to carry two kayaks on your 2017 Ford F-350 over the bed with a BAK Revolver X4 Hard Tonneau Cover part # BAK79330 installed. The best system is hands down the Thule TracRac SR Sliding Truck Bed Ladder Rack part # TH43003XT-785 because the crossbars have channels so you can use channel mounted accessories like the Thule Hullavator Pro Kayak Carrier part # TH898 or the Thule Hull-A-Port Aero Kayak Carrier part # TH849000. The TracRac SR also has sliding...
    view full answer...

  • Recommended Kayak Carrier for TracRac TracONE Truck Bed Ladder Rack
  • I do have a solution for you, however I spoke with my contact at Thule (who manufactures the TracRac systems) and he stated that J-Style Kayak carriers are not compatible with the TracOne Truck Bed Ladder Rack # TH27000XTB that you referenced in your question. This is because the crossbars on the ladder rack are simply too wide for the J-Style carriers to mount properly. I instead recommend looking at the Thule Surf Pad # TH804 to protect and support your kayaks on the ladder rack....
    view full answer...

  • Ladder Rack Recommendation for 2018 Toyota Tacoma With Deck Rail System
  • I highly recommend the Rola Haul-Your-Might T3 Truck Bed Ladder Rack # 59799 for your 2018 Toyota Tacoma with the Deck Rail System because of its easy installation, strength, durability and economical price compared to similar ladder racks. If you take a look at the accompanying photo you can see how this ladder rack will look when installed on a 2018 Tacoma. The Rola Haul-Your-Might T3 will not require any drilling to install in your '18 Tacoma; instead it secures directly into your...
    view full answer...

  • Kayak Carrier For Adarac Ladder Rack to Carry Kayaks Flat On Bars
  • The Yakima HullyRoller Kayak Carrier part # Y04035 can be installed on crossbars up to 1-1/2 inches in height like what your Adarac ladder rack bars have if you use the Universal MightyMounts # Y03590. This would give you a way to carry the kayaks hull side down.
    view full answer...

  • Will Thule Fit Kit 3101 and TracRac TracVan Fit RetraxPro SR on Ford F-150
  • The Thule Fit Kit # THKIT3101 that you referenced is designed for Thule Rapid Podium # TH460R roof-rack legs. I do have a solution for you to add a roof rack or ladder rack to the Retrax XR tonneau cover on your Ford F-150 but unfortunately the Thule TracRac TracVan ES # TH29610XT won't fit. If you wanted to add a Thule roof rack to your RetraxPro XR then you will need the Fit Kit # THKIT3101, Rapid Podium Legs # TH460R, and 60" SquareBars # TH712500. Using this system though won't give...
    view full answer...

  • Cantilever for Thule TracRac TracONE Ladder Rack on 2018 Chevy Colorado
  • There is a cantilever extension that works with the Thule TracRac TracONE Truck Bed Ladder Rack # TH27000XTB (Black) or # TH27000XT (Silver) that fits your 2018 Chevy Colorado. The correct part is Cantilever Extension # TH24001XT.
    view full answer...

  • Is There Difference Between Thule TracRac Ladder Rack TA37001 and TA37001XT
  • There really isn't a difference between the two ladder racks you mentioned. The TracRac # TA37001 and the Thule TracRac # TH37001XT are both great ladder racks made by the same company but under different brand names. Either one will give you the same ladder rack. Most likely will we eventually go down one part number though.
    view full answer...

  • Tonneau Cover and Sliding Ladder Rack Recommendation for 2018 Chevy Colorado 6 ft Bed
  • The Bak Revolver Tonneau covers like the part # BAK79125 are the only ones that are rated for use with the TracRac sliding ladder racks like the TracRac part # TH43002XT-783 that you have installed on your 2018 Chevy Colorado long bed. The # BAK79125 is the correct fit for your Colorado as well.
    view full answer...

  • Can Rhino-Rack Track Mount Roof Rack be Installed on Bed Rails of 2015 Ford F-250
  • For your 2015 Ford F-250 I recommend going with the longer Rhino-Rack Roof Rack System # Y02-500B that includes 65 inch crossbars. These bars will reach across the width of your Ford's bed and also provide just a bit of overhang to better accommodate wider loads. You can indeed mount this system directly to your truck's bed rails. Mounting the tracks to the rails will require some drilling but it's going to provide you with an extremely nice, adjustable rack with a 220 pound weight...
    view full answer...

  • Truck Camper/Topper Roof Rack System for a 2011 Ford F150 Crew Cab with 5-1/2 Foot Bed
  • Rhino Rack produces a full range of track kits that will work on your truck topper. You simply need to choose the length and color for the vehicle. All of these kits include a set of Rhino-Rack Vortex Aero crossbars that have c-channel mounts and are quick-slide to move forward and backwards along the rack as you need it. They are all inclusive and don't require additional parts. 54 inches long, Silver, part # Y02-480 or Black, part # Y02-480B 59 inches long, Silver, part # Y02-490...
    view full answer...

  • Ladder Rack Compatible with Tonneau Cover on 2015 Toyota Tundra SR5
  • The Thule Xsporter Pro Adjustable Height Truck Bed Ladder Rack - Aluminum - 450 lbs - Silver # TH500XT is not compatible with a tonneau cover because it attaches on the inside of the bed rails. Tonneau covers use that same space so the two are not compatible. If you have a tonneau that fits inside the bed rails of your Tundra, then you can use the Thule TracRac Sliding Rack # TH43002XT-610 for 6.5 foot bed or # TH43002XT-011 for 8 foot. The Adarac Pro Series Custom Truck Bed Ladder...
    view full answer...

  • Are Thule TracRac SR Ladder Racks Removeable and Compatible with BAK Revolver X4 Tonneau Cover
  • Yes, you are correct that the Thule TracRac SR Sliding Ladder Racks are compatible with the BAK Revolver X4 tonneau covers such as # BAK79329. And the TracRac SR does allow the uprights to be removed completely from their tracks or moved to your desired positions for specific cargo needs. The TracRacs for your 5-1/2-foot bed 2018 F-150 are the standard 2-bar system # TH43002XT-508 and the 3-bar system that includes an over-the-cab cantilever # TH43002XT-508EX. Both have a 1250-lb weight...
    view full answer...

  • Best Ladder Rack and Tonneau Cover Combination on 2017 Ford F-150
  • The best tonneau cover and ladder rack combination for a 2017 Ford F-150 is the TracRac SR # TH43002XT-501 with the BAK Revolver X2 # BAK39327. Most tonneau covers will either install in the same place a ladder rack or make contact with the rack while trying to open the cover. The Revolver X2 installs inside the bed rails of the truck and the SR installs in the stake pockets. The X2 is also sits a little further inside the bed rails than other covers, which keeps it from making contact...
    view full answer...

  • Highest Capacity Rack System for Yakima Tracks on Camper Shell
  • The highest load capacity rack system that you can use with the Yakima 60" Tracks for Roof Racks # Y01135 is the Rhino-Rack Roof Rack for Thule and Yakima Tracks which comes in Black # Y01-120B-NT or Silver # Y01-120-NT and has a 220 lb weight capacity. To carry a pair of heavy kayaks on this rack's 54" long Rhino-Rack HD Crossbars I strongly recommend using two of the Rhino-Rack J-Style Kayak Carriers # S510 or the folding # S512 because they have a 99 lb capacity and using two of...
    view full answer...

  • Will the Thule Hull-A-Port Kayak Carrier Fit the Thule Xsporter Pro Ladder Rack
  • In order to attach the Thule Hull-A-Port Kayak Carrier part # TH834 to the Thule Xsporter Pro Adjustable Height Truck Bed Ladder Rack part # TH500XT you will need the Watersports Adapter for Aeroblade/Aeroblade Edge Bars part # THXADAPT11. The Xsporter's crossbars are too large for the Hull-A-Port to wrap around which is why you need to use the Watersports Adapter because this converts the Hull-A-Port to mount using the track system.
    view full answer...

  • Recommended Roof Rack To Install On Bed Rails Above Tonneau Cover On a Ford Ranger
  • I do have a roof rack that you can install atop the bed rails on a mid-size truck bed above a hard folding tonneau cover that mounts inside the bed rails and for that you will want to use the Rhino-Rack Roof Rack System w/ 2 Vortex Aero Crossbars part # Y02-500B-ST. The issue with the Rhino-Rack Roof Rack System part # Y06-560 is that the crossbars are not long enough to allow the tracks to span the width of the truck bed and mount atop the bed rails. There might also be an issue with...
    view full answer...

  • Thule TracRac TracONE Ladder Rack Recommendation for 2018 Toyota Tacoma with Deck Rail
  • For your 2018 Toyota Tacoma Access cab with the deck rail the Thule TracRac TracONE kit you need is the part # TH27000XTB-XK4B which comes with the correct adapters you'd need. You wouldn't need to also separately provide any adapter.
    view full answer...

  • Black Ladder Rack Options for a 2018 Toyota Tacoma with Factory Deck Rail System
  • There are only two ladder racks for your 2018 Toyota Tacoma with the factory deck rail system that are black in color which are the Thule Xsporter Pro Ladder Rack part # TH500XTB-THXK4B and the Thule TracRac TracONE Ladder Rack part # TH27000XTB-XK4B. Unfortunately, neither of these two options are offered with the over the cab extension. The main difference between them is that the height of the Xsporter can be adjusted whereas the height of the TracONE is fixed. The only option we...
    view full answer...

  • How To Secure A Kayak To The Thule Xsporter Pro Truck Bed Ladder Rack
  • I do have a recommendation for you, however, Yakima does not make an adapter for the Yakima HullHound Kayak Saddles w/ Tie-Downs part Y04079 that will allow them to work with the Thule Xsporter Pro Adjustable Height Truck Bed Ladder Rack part # TH500XT. In order to secure a kayak to the Xsporter crossbars, I recommend using a set of tie down straps like the Erickson Cam Buckle Tie-Down Straps part # 05605 and foam blocks like the Malone Foam Kayak Block for Truck Racks part # MPG159...
    view full answer...

  • Ladder Rack for a Leer Camper Shell on a 2007 Toyota Tundra
  • We do have a camper shell ladder rack you can use with your Leer camper shell on your 2007 Toyota Tundra. take a look at the Thule TracRac CapRac # TH29200XT. This rack includes everything so it is ready to install. The load stops are also included. The bars are 65 inches long and the capacity is limited to the capacity of your Leer camper shell. If you would rather have a rack that is adjustable front to back then you can use Rhino-Rack roof rack # Y01-120-NT with 54 inch long bars...
    view full answer...

  • Ladder Rack Recommendation for a 2012 Toyota Tacoma with the Deck Rail System
  • Yes, for your 2012 Toyota Tacoma with the deck rail system I recommend using the Rola Haul-Your-Might T3 Truck Bed Ladder Rack part # 59799. This ladder rack is one of our most cost effective options we have for your vehicle. The rack is constructed of aluminum and can support weight capacities up to 800 lbs. The aerodynamic elliptical shape of load bars reduces drag and wind noise. The load bars are 65-1/16" long x 3-1/16" wide which allows for the use of most crossbar mounted accessories....
    view full answer...

  • Recommended Cost Effective Truck Bed Ladder Rack for a 2017 Toyota Tacoma With Deck Rails
  • I do have a ladder rack that will work with the deck rail system on your 2017 Toyota Tacoma but the Erickson Truck Bed Ladder Rack part # EM07706 will only fit models without the deck rail system. For a system that is similar and compatible with your vehicle I recommend using the Rola Haul-Your-Might T3 Truck Bed Ladder Rack part # 59799 as this is the most cost effective ladder rack system we have for you. The Haul-Your-Might has a set of aerodynamic elliptical shaped load bars designed...
    view full answer...

  • Ladder Rack Recommendation For 2019 Toyota Tacoma that Fits Well
  • We had the chance to install the Rola Haul-Your-Might T3 Truck Bed Ladder Rack # 59799 on a 2018 Toyota Tacoma very similar to yours and found it fit well. I attached a link to a page that covers this install for you to check out and maybe compare to your install to see where the issue might be. For a similar ladder rack from a brand that has a better reputation in terms of fit we have the Thule TracONE part # TH27000XTB-XK4B that I would recommend highly. The quality is much higher...
    view full answer...

  • Replacement Slider Base for TracRac SR On a 2015 GMC Sierra 1500 Short Bed
  • If you have the Thule TracRac SR Sliding Truck Bed Ladder Rack part # TH43002XT-782 on your 2015 GMC Sierra 1500 which is for a 5-1/2' long bed then you will need the Base Rails for Thule TracRac SR Sliding Truck Bed Ladder Racks part # TH21782 but if you have the Thule TracRac SR Sliding Truck Bed Ladder Rack part # TH43002XT-781 on your 2015 GMC Sierra 1500 which is for a 6-1/2' long bed then you will need the Base Rails for Thule TracRac SR Sliding Truck Bed Ladder Racks part # TH21781.
    view full answer...

  • Recommended Ladder Rack for 2015 GMC Canyon with Tonneau Cover
  • The only ladder rack we currently have available for your 2015 GMC Canyon if it has a 6 foot bed that will install without using the inside of the side rails is the Thule TracRac SR Sliding Truck Bed Ladder Rack # TH43002XT-783. The rack will install using the stake pockets on your GMC Canyon and sit directly atop the factory side rails. This system will work with the bed cover on your truck as long as it is mounted completely inside the rails, and the top portion is not used at all. This...
    view full answer...

  • Ladder Rack Recommendation to Fit 2018 Ram 1500 5-1/2 ft Bed with Gator Tonneau
  • For your 2018 Ram 1500 5-1/2 foot bed the Adarac Aluminum Series Custom Ladder Rack part # A4001235 is a fit and will allow your current Gator tonneau cover to fit well. This is only solution we have that will fit both the truck and with the tonneau you mentioned as well. To carry kayaks you'd want the Tie Down kit # A4000882 along with cargo straps such as # 1151801 or # EM34415.
    view full answer...

  • Height Adjustable Ladder Rack Recommendation for 2018 Toyota Tacoma
  • I am sure there is a way to accomplish what you are looking to do with the Rola Haul-Your-Might T3 # 59799. We don't have a specific way to trim the uprights and bars since that's not something this was intended for, but if you have the patience and skills/tools I am sure you could find a way. Another option to consider would be an adjustable height ladder rack that is confirmed to fit your 2018 Toyota Tacoma like the Thule part # TH500XTB-THXK4B. The bars of this are also pretty long...
    view full answer...

  • Replacement Feet and Mounting Hardware for the Thule TracRac CapRac Ladder Rack 29200XT
  • Since you already have the crossbars for the Thule TracRac CapRac Ladder Rack # TH29200XT all you need to complete your roof rack are the Replacement Feet # TH8527646001 and the Replacement Swivel Brackets # TA29203 to complete your setup. The pricing for each of these items can be found on their product pages. and yes, those holes use a 3/8" T-Bolt. The only other part you may need if you don't have them are the Replacement Load Stops # 753-3761.
    view full answer...

  • Ladder Rack for Truck Bed with Cap
  • I have a solution for you, but because the Buyers Products Over-The-Cab Truck Rack # 3371501150 requires the use of the bed rails, you won't be able to use it with a truck bed cap. For this reason I recommend going with something similar to the Rhino-Rack Roof Rack System # Y02-490B . This rack will install on the cap of your truck bed via a track system and provide you with the crossbars required to safely carry ladders without scratching up the roof of the cap or the truck. This rack...
    view full answer...

  • How to Carry Canoe on Utility Trailer
  • I suggest the telescoping Rack'em Fitz-All Enclosed Trailer Ladder Rack # RA-28 which extends to 8-1/2 feet wide. This extruded aluminum rack fits trailers that have rain gutters and it has a 400-lb load rating. You can see an installation example in the linked photo. This rack uses uprights that measure 17-inches from the bottom of their brackets to the tops of the adjustable crossbars. I mention this since I do not know how much height you need. If you need a taller rack check out...
    view full answer...

  • Rhino-Rack System for ARE Camper Shell on 2005 Toyota Tacoma (OUT TO RR CS, BY 8/14))
  • I reached out to Rhino-Rack to confirm the fit of these parts. Both of these kits, Vortex Aero Bars, part # Y02-490-NT and the Heavy Duty bars, part # Y01-130-NT are equal in strength and will fit the ARE kit. You will want to verify that your tracks are actually Yakima tracks. In order to mount to the Yakima track, you'll need the Yakima Adapter Kit, part # RRT-FK3. If the tracks are Thule, you'll want to go with Thule Adapter Kit, part # RRT-FK1. These adapter kits will...
    view full answer...

  • Availability of Shorter Track Rhino-Rack Roof Rack System w/ 2 Vortex Aero Crossbars # Y02-500B-ST
  • The tracks of the Rhino-Rack Roof Rack System w/ 2 Vortex Aero Crossbars # Y02-500B-ST could be cut shorter if you wanted to but also there is a shorter version of this available too as part # Y02-480B which has 54 inch long tracks instead.
    view full answer...

  • Kayak Roof Attachments Compatible With Erickson Truck Bed Ladder Rack # EM07705
  • I reached out to Erickson and the ladder rack # EM07705 has crossbars that are 3-1/4 wide by 1-1/2 inches tall. That will make some Kayak carrier options unable to work and other still functional. The Rhino Rack Nautic Roof # RR571, the Thule Top Deck # TH881, and the Yakima EvenKeel # Y04052 will not be compatible. However, Swagman says their Rincon # S65141 will work even if you need to purchase longer screws at a local hardware shop.
    view full answer...

  • Compatibility of Adarac Pro Aluminum Rack A4000947 with BAKFlip MX4 BAK48328 on 2016 F-150 8-ft Box
  • The Adarac Pro Aluminum Ladder Rack # A4000947 is a confirmed fit for your 2016 Ford F-150 with 8-foot bed, but please note the similar rack # A4000966 that you referenced fits only F-250, F-350 and F-450 long bed pickups. Yes, this ladder rack # A4000947 is compatible with the BAKFlip MX4 tonneau cover for your F-150, part # BAK48328, since the rack and cover do not use the same installation points. The Adarac installs on the bed rails while the BAKFlip installs inside the bed rails....
    view full answer...

  • Tonneau Cover Recommendation for 2018 Toyota Tundra with TracRac SR Ladder Rack
  • The only tonneau cover we can recommend with the TracRac SR you have installed on your 2018 Toyota Tundra part # TH43002XT-610 is the BAK Revolver X2 part # BAK39410 as it's the only one we have found to consistently have the needed clearance to fit between the bed rails.
    view full answer...

  • Load Stops for Adarac Aluminum Ladder Rack that Has 1-1/2 inch Wide Load Bars
  • The Adarac ladder racks that have bars that are 1-1/2 inches in width are the Aluminum Series Ladder racks like the part # A4001223 which then the correct load stops would be the part # A4000880 which attach to channels on the bottom of the load bars. I attached a picture that shows what they look like installed. I also attached a review video for this for you to check out as well.
    view full answer...

  • Wind Deflector for Buyers Products Ladder Rack
  • Though there isn't a mesh available there is absolutely an air deflector for the Buyers Products Over-The-Cab Truck Bed Ladder Rack - Aluminum # 3371501400 or Black # 3371501410. The Wind Deflector Kit for Buyers Products Truck Bed Ladder Rack # 3371501193 will ensure you have a quieter ride in your 2017 Chevy Silverado. I have added links to video reviews of both the rack and wind deflector for you to check out.
    view full answer...

  • Is There Difference Between Ladder Rack Part Numbers # TA37005 and # TH37005XT
  • Both of the part numbers you mentioned currently represent the same ladder rack. Thule/TracRac recently switched the part numbers from # TH37005 to # TH37005XT and we currently have both available as the transition takes place.
    view full answer...

  • How to Carry a Kayak and a Canoe with a 2016 Ram 1500
  • We have a couple of different options for you to haul a kayak and canoe with your 2016 Dodge Ram. One way to haul your kayak and canoe is with a truck bed ladder rack. I recommend going with the TracRac TracONE Ladder Rack # TA27000XTB. This is rated for 800 lbs so you can use it for more than just hauling your kayak and canoe. It is made of aluminum so it is strong and rustproof but also lightweight. You will need to use pads, like the Thule Surf Pad # TH804, to load your kayaks on...
    view full answer...

  • Does Buyers Products Over the Cab Ladder Rack Come With All Hardware to Mount to 2018 Toyota Tundra
  • Yes, the Buyers Products Over-The-Cab Truck Bed Ladder Rack # 3371501410 does come with everything you need in order to install it in the 6-1/2 foot bed of your 2018 Toyota Tundra, and no drilling whatsoever is required. It simply installs using J-hooks that attach under your Tundra's truck bed rails, as you can see by the linked installation instructions I added for you. The Buyers Products Over-The-Cab Truck Bed Ladder Rack # 3371501410 (Black) and # 3371501400 (Silver) have a hefty...
    view full answer...

  • Rhino-Rack Roof Rack Crossbars for a Truck Camper Shell with Yakima Tracks
  • Actually there are systems that are designed to fit in the Yakima tracks. You will need Rhino-Rack Quick Mount Legs # RRRLT600 and for 65 inch Vortex bars use # RRVA165B-2. Since you already have tracks you won't need to add any or be stuck with any tracks that come with other kits.
    view full answer...

  • Recommended Kayak Carrier Compatible With Rola Haul-Your-Might T3 Truck Bed Ladder Rack
  • The Rola Haul-Your-Might T3 Truck Bed Ladder Rack - Aluminum - 800 lbs # 59799 is compatible with the Rhino Rack Nautic 581 Rear Loading Kayak Carrier # RR581 using the t-slots. If you want a J-style carrier, I recommend the Thule Hull-A-Port Pro Kayak Carrier w/Tie-Downs # TH848. For this you will want the Watersports Adapter for Aeroblade/Aeroblade Edge Bars # THXADAPT11. For 2 kayaks, I recommend the Rhino-Rack J-Style Kayak Carrier - Folding - Universal Mount # S512 along with...
    view full answer...

  • LAdder Rack Needed for 2015 Chevy Silverado 1500 6-1/2 Bed with BAKFlip MX4 Cover
  • Since your BAKFlip MX4 Hard Tonneau Cover # BAK48121 sits inside the bed rails of your pickup we do have some solutions for you. The best option would be to use the Thule TracRac SR which is a sliding rack that mounts on top of your bed rails and has a weight capacity of 1,250 lbs. To fold your MX4 up you will simply need to move the legs out of the way along their tracks. For your Silverado you will need either part # TH43002XT-781 or part # TH43002XT-781EX if you want the over-the-cab...
    view full answer...

  • How to Carry Two Kayaks with the Thule TracRac TracONE Ladder Rack
  • The 65" long crossbar you are referring to wouldn't happen to be the ones on the Thule TracRac TracONE Ladder Rack part # TH37005XT would it? If so these crossbars are a bit larger (4" wide x 1-1/2" tall) than a standard aero crossbar which means the list of compatible kayak carriers will be diminished greatly. The issue is that the crossbars are too wide for most wraparound style kayak carriers and you will need to use one that mounts in the track like the Malone SaddleUp Pro Truck Bed...
    view full answer...

  • Recommended Ladder Rack for 2007 Chevy Silverado New Body that Mounts to Stake Pockets
  • For a ladder rack that will mount to the stake pockets on your 2007 Chevy Silverado New Body, I recommend taking a look at the Thule TracRac SR Sliding Truck Bed Ladder Rack. If you have the 6-1/2 foot bed, you will use # TH43002XT-501 and if you have the 1500 with the 5-1/2 foot bed, you will need # TH43002XT-608. This is an excellent sliding ladder rack that features T-track base rails that will let the rack slide along the length of the bed. 4 aluminum load stops are included to keep...
    view full answer...

  • What Thule TracRac Ladder Rack Components Fit 2018 Ford F-250 6-3/4 ft Bed
  • Sounds like you have a 2018 Ford F-250 6-3/4 foot bed and are wanting to install a Thule TracRac ladder rack in it from a previous vehicle. The correct complete kit for your truck is the # TH43003XT-785. Which if you had the correct size upright set the base rails you'd need are the part # TH21785. But I'd need to know the part number of the uprights you have or the year/make/model of the truck the ladder rack fit to confirm the fit.
    view full answer...

  • Highest Capacity Aluminum Ladder Rack for a 2009 Toyota Tacoma
  • Congratulations on the purchase of your 2009 Toyota Tacoma. The most you will be able to carry with a ladder rack on this vehicle if you have the deck rail system is 800 lbs because that is what the deck rail system limits you to. Therefore, the best option we have for you is the Thule TracRac TracONE Ladder Rack for Toyota Tacoma part # TH27000XT-TA for silver or part # TH27000XTB-TA for black. These systems are both made of aluminum which means they are very lightweight, only 50 lbs....
    view full answer...

  • What Tonneau Covers Work with the TracRac SR on a 2017 Chevy Silverado 3500 W/ 6-1/2 Bed
  • The only tonneau cover we have confirmed to work with the TracRac SR Sliding Truck Bed Ladder Rack part # TH43002XT-781 or part # TH43002XT-781EX for your 2017 Chevy Silverado 3500 is the BAK Revolver X2 Hard Tonneau Cover part # BAK39121. The BAK Revolver is one of our most popular tonneau covers due to it's ease of use and durability. It is possible that other tonneau cover options are available and will work with the TracRac SR but we have not had a chance to confirm this. Typically,...
    view full answer...

  • Compatibility of Ladder Rack with Gator SR1 Tonneau Cover
  • Because your Gator SR1 tonneau cover mounts on top of the bed rails, there is not a ladder rack that is directly compatible. Based on you looking at the # A70480, I assume you have a 2010- present Ram with 6-1/2 foot bed. The closest option if you can get to your stake pockets is the Adarac Pro Series Custom Truck Bed Ladder Rack - Aluminum - 500 lbs # A4000956. This rack uses the stake pockets for mounting and will be the widest mount with straight upright bars to give you the best...
    view full answer...

  • Parts Needed to Replace Half of Thule TracRac TracONE Ladder Rack # TH27000XT-EX
  • I'm sorry to hear about your stolen rack! While half of the Thule TracRac TracONE Ladder Rack # TH27000XT-EX is not available as a kit, we do have the necessary parts that will let you rebuild what is missing from your rack. I will list all the needed parts below: Toolbox Mount Kit # TH41000 Replacement Crossbar # 8542526002 Modular Upright # 8523446001 Modular Saddle # TA8523444001 Modular Base (Left Front/Right Rear) # TAPT-27001 Modular Base (Right Front/Left Rear) # 8528383001 Modular...
    view full answer...

  • Replacement Alignement Plate, Clamp Plate, and Bolt Needed to Install Adarac Custom Ladder Rack
  • The alignment plate, clamp plate, and bolt to hold the Adarac Custom Truck Bed Ladder Rack # A90230 in place are found with part # A70432 on our site.
    view full answer...

  • Recommended Roof Rack and Bike Rack for Fleetwood Niagra Camper
  • If your camper has a mounting track along the two side edges of the roof, then you may be able to install the SportRack Pop-Up Camper Roof Rack # SR1020 without needing to drill holes. I have attached an image from the installation manual that shows this option. If you do not have these types of mounting tracks, then this roof rack and others designed for campers will require drilling into the roof to install the crossbar feet. In this application, the 4 roof-rack feet on this system...
    view full answer...

  • No-Drill Ladder Rack for 2018 Chevy Silverado 1500 with 6-1/2-foot Bed
  • Yes, we have ladder racks for your 2018 Silverado 1500 with 6-1/2-foot bed that are no-drill installations. In fact we have a lot of them that you can see on the linked page. These include fixed racks like Erickson # EM07705, folding racks like DeeZee's Invis-A-Rack # DZ951600 that you can get out of your way when you need to and also adjustable sliding rack systems like the Thule TracRac SR # TH43002XT-781 and # TH43002XT-781EX which includes a 3rd cantilever bar for over the cab. Having...
    view full answer...

  • Which Bar Length Yakima Overhaul Ladder Rack is Recommended for 2015 Toyota Tacoma
  • I checked with Yakima just now and they recommend the 60 inch long crossbar Yakima Overhaul # Y01151-5768 that you referenced for your 2015 Toyota Tacoma.
    view full answer...

  • Will the MaxxTow Truck Bed Ladder Rack # MT70423 Fit a 2017 Nissan Titan with the Utili-Track System
  • I do have a solution for you, but unfortunately the MaxxTow Truck Bed Ladder Rack # MT70423 is not compatible with a 2017 Nissan Titan that has the Utili-Track System. For a similar ladder rack I recommend going with the Rola Haul-Your-Might T3 # 59799 which is an aluminum ladder rack that has a weight capacity of 800 lbs. This system adjusts just like the MaxxTow system plus it has aero style crossbars with the T slots for the Eye Bolt Kit # 59796 or the Load Stops # 59794 to help secure...
    view full answer...

  • Recommended Aluminum Ladder Rack in Black for a 2006 Nissan Titan Without Utility Track System
  • I do have an option for you but the Rola Haul-Your-Might T3 Truck Bed Ladder Rack part # 59799 is designed specially to be used with the factory track/channel system on Nissan and Toyota trucks therefore there would be no way to attach to a truck that did not use the factory track/channel system. For a similar ladder rack that will work on your 2006 Nissan Titan without the factory track/channel system, I recommend using the Buyers Products Truck Bed Ladder Rack w/ Load Stops part #...
    view full answer...

  • Is Weight Capacity of Rhino-Rack Roof Rack System # Y02-490B-ST Static or Dynamic
  • The 220 lb weight capacity of the Rhino-Rack Roof Rack System # Y02-490B-ST that you referenced is a dynamic weight capacity. This means it's the weight it can carry when on the road. Static would be capacity standing still which Rhino Rack does not offer that figure.
    view full answer...

  • Yakima Outdoorsman Ladder Rack and Kayak Carrier for a 2017 Ford F-250
  • The Yakima Outdoorsman 300 Ladder Rack for full size trucks like your 2017 Ford F-250 is actually going to be # Y01137-Y00411. The one you asked about is for compact trucks. The Outdoorsman is compatible with all current Yakima roof kayak carriers because the bars are the same size as the roof rack bars. The most popular Yakima option is the JayLow, # Y04073. But you may want to consider a rear loading option with rollers such as # Y04083-04082 since trucks are so tall. I have linked...
    view full answer...

  • Camper Roof Rack Options for 2013 Jay Flight Swift with Rounded Edges
  • If you don't have squared edges on your 2013 Jay Flight Swift camper for the SportRack Pop-Up Camper Roof Rack # SR1020 to install then you will want to look at another roof rack that is compatible with your application. We have the Swagman Roamer LT # S80510 which is a completely custom option that you can install anywhere on your roof as well as the SeaSucker Monkey Bars Roof Rack # 298-SX6000 which uses vacuum cups to secure to the roof. The Swagman options are permanent roof...
    view full answer...

  • Recommended Load Stops, Eyelets, And Kayak Carrier For Maxxtow Ladder Rack On 2016 Ford F-150 5.5 Ft
  • The MaxxTow Truck Bed Ladder Rack w/ Load Stops - Aluminum - 400 lbs # MT70423 is a confirmed fit for your 2016 Ford F-150 Super Crew with 5-1/2 foot bed. You can purchase additional load stops like the Load Stops for Thule Ladder Rack and Aeroblade Load Bars - Qty 4 # 753-3761. You can also use T-bar eyelets like # TAPI-11019, but you may also want to consider using a carrier for your kayaks. We have a customer that used the Yakima EvenKeel Flexible Boat Saddles for Roof-Rack Crossbars...
    view full answer...

  • Recommendation for Reducing Wind Noise on MaxxTow Ladder Rack
  • One of the main reasons the MaxxTow Truck Bed Ladder Rack # MT70423 for your 2019 Ford F-150 is howling is because the T-slot on the crossbars is open. What you can do is use the Top Channel Cover for Thule Xsporter Pro Load Bars # 852-5402-013 and insert that into the T-slot of the MaxxTow bars. Though it was designed for a Thule crossbar, it does fit the MaxxTow rack's T-slot. This channel cover has what is called a "WindDiffuser textured surface" that is designed to minimize wind...
    view full answer...

  • Availability of Rhino-Rack Roof Rack System w/ 71" Heavy-Duty Square Crossbars
  • I can definitely help you with the same type of setup as part # Y01-140B but currently there aren't any kits that use the 71" Rhino-Rack Heavy Duty crossbars. The parts that you will need are the Rhino-Rack 71" Heavy-Duty Roof Rack Crossbars # RB1800B-2, the Quick Mount Legs # RRRLT600, and the RTC-Style Roof Rack Tracks # RTC16.
    view full answer...

  • Roof Rack Recommendation for 2015 Honda Odyssey EX-L
  • We have roof racks that will fit your 2015 Honda Odyssey with a naked roof like the Rhino Rack roof rack part numbers # RRVA126B-2, # RRQMVA10, # RRRTV168, and # RRRLT600. I really wish we had a recommended way to install the Rhino-Rack Roof Rack System # Y05-460 but there isn't a way that we can guarantee will fit.
    view full answer...

  • Recommended Rhino-Rack Complete Roof Rack System for Snug Top Truck Camper Shell Bed Cap
  • Rhino-Rack does have a complete kit with shorter crossbars that still have the tracks for your truck cap. It is the Rhino-Rack Roof Rack System w/ 2 Vortex Aero Crossbars - Track Mount - Black - 54" Long # Y02-480B. If you want shorter bars than that, there is not a kit but you can create the same thing with individual parts. You can use the Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount - 63" Long - Qty 2 # RTC16, the legs # RRRLT600, and then add the bar length you desire. You...
    view full answer...

  • Does Thule TracRac SR for 2015 GMC Sierra 2500 Come With Expansion Blocks
  • The Thule TracRac SR Sliding Truck Bed Ladder Rack # TH43002XT-781 comes with the needed expansion block pocket mounts so there is no need to order them separately if you are getting this ladder rack for your 2015 GMC Sierra 2500 with a 6-1/2 foot bed. If you just need the blocks they are Replacement Rubber Block for Base Rail Installation of TracRac Sliding Ladder Racks # TARB-11032-1.
    view full answer...

  • Recommended Ladder Rack with Cab Extension for 2018 Ford F-250
  • The Thule TracRac TracONE Truck Bed Ladder Rack # TH27000XTB is confirmed to fit your 2018 Ford F-250 and will work well. With that being said, when this particular ladder rack is installed on your Ford F-250, there is very little clearance between the crossbars and the truck cab. Because of this, I do not recommend adding the Cantilever Extension # TH24001XT as it's very possible that it will make contact with the roof of the cab, especially if any weight were put on it. If you are...
    view full answer...

  • Ladder Racks Compatible with 2014 Nissan Frontier Factory Utili-Tracks
  • The Rola Haul-Your-Might T3 Truck Bed Ladder Rack # 59799 is not a fit for your 2014 Nissan Frontier. The only full ladder rack that is compatible with your factory Utili-Track System is the Pilot Bully Adjustable Ladder Rack for Full-Size and Compact Trucks - 500 lbs # CG-902 if you have the Crew Cab 6 foot bed. If you have the King Cab with 6 foot bed, then Erickson Truck Bed Ladder Rack w/ Load Stops # EM07705 or the TracRac SR Sliding Truck Bed Ladder Rack # TH43001XT-600 are also...
    view full answer...

  • Can Thule Roof Rack Accessories Fit on Crossbars of Rola Haul Your Might
  • Yes, Thule roof rack accessories like kayak carriers and paddleboard carriers will fit on the crossbars of the Rola Haul-Your-Might T3 Truck Bed Ladder Rack # 59799 that fits your 2019 Toyota Tundra! The accessories will fit either around the bars or in the top channel.
    view full answer...

  • Replacement Upright Legs For TracRac SR 43003 Sliding Ladder Rack For 2017 Ford F-250 Super Duty
  • I contacted Thule and the legs that come with the TracRac SR like Sliding Truck Bed Ladder Rack, Item # TH43003XT, are 22-3/4 inches. For a shorter leg, Thule and I recommend the Replacement Upright Leg for the TracRac SR, Item # TA7521902001, which is 21 inches. I am attaching a link to our available inventory and video for you to check out.
    view full answer...

  • Low Profile Rack and Tonneau Cover For a 2015 Ford F-150 SuperCrew Short Bed Truck
  • I have a solution for you, but unfortunately equipping a tonneau cover restricts your options when you want to add bars to your truck bed. These tend to cover or interact with the stake pockets, which the bed bars tend to use, and limit the available space for these bars to operate in the way you want them to. Additionally, these systems tend to not be compatible with racks when equipped with roll up or retractable covers. Instead, I recommend a traditional ladder rack system. One of...
    view full answer...

  • How to Carry Two Kayaks On 2015 F150 6 1/2 Foot bed With BakFlip Hard Cover
  • The best way to carry 2 kayaks on your 2015 F150 6 1/2 foot bed is a ladder rack. I recommend Adarac part # A4000946. The Adarac installs on the bed rails of the truck so it does not interfere with the BakFlip G2 part # BAK26327 installation location. It also allows you to fold your cover up when you need access to the bed without interference compared to other ladder racks that are not compatible with tri-fold hard covers. The bars on the ladder are 72 inches long so you can carry both...
    view full answer...

  • Strongest Ladder Rack for 2018 Toyota Tacoma Double Cab with Deck Rail System
  • For your heavy-duty application I recommend the Thule T-Rac Pro2 Ladder Rack # TH37005XT which is rated for 1000-lbs. This fixed-height rack is aluminum so there is no worry about rust or corrosion. The slotted crossbars let you easily mount and adjust accessories such as the included heavy-duty load stops. If you prefer a rack with a 3rd over-the-cab crossbar we have that option too with Pro2 rack # TH37005XT-EX. These Thule racks are the highest capacity ladder racks for your truck. If...
    view full answer...

  • Black Ladder Rack for a 2002 Ford Econoline Van
  • The MaxxTow van ladder racks do not come in black but there are other van ladder racks that do such as the Rola ladder rack, # 59622, for 2 rails or # 59623 for 3 rails. They aren't completely black though. They have what is called a hammered finish. Another option is to go with a roof rack with black bars. We have a few options and I have included a link to them below. For the 2002 Ford Vans customers like the Rhino-Rack roof rack with heavy duty crossbars consisting of the following...
    view full answer...

  • Rhino Track Mount Roof Rack for 5' Long Cap on a 2006 Dodge Ram 1500 6-1/2' Bed
  • The Rhino-Rack Roof Rack System # Y02-480B is a confirmed fit for your 2006 Dodge Ram 1500 6-1/2' bed as well as the 8' 1500. The reason it fits both is because the track itself can be cut to length for your specific application. You just need to make sure that the cut is perfectly straight so that it is easier to use the track and the caps fit. If you would rather not cut the track you can just make your own kit with the 54" Vortex Aero Crossbars # RRVA137B-2. the Quick Mount Legs #...
    view full answer...

  • Camper Shell Roof Rack and Kayak Carriers for a Ford Pickup
  • If you are able to and want to just lay the kayaks on a roof rack you can install the TracRac CapRac # TH29200XT onto the truck's camper shell and secure them using ratchet straps like # EM34415. Another option is to add the Swagman Roamer LT # S80510 to the camper shell and then add kayak carriers. The Thule BigStack # Y04041 is a great option to carry the kayaks. The BigStack is basically two posts that mount to the crossbars on the shell that the kayaks are secured to. It includes...
    view full answer...

  • Rhino Rack Fit for Leer Camper With Thule Tracks
  • Yes, there are Rhino Rack crossbars that fit in the Thule tracks on your Leer camper; the bars come in either Black or Silver and 54" or 59" length. - Black - 54" Long # Y01-120B-NT - Black - 59" Long # Y01-130B-NT - Silver - 54" Long # Y01-120-NT - Silver - 59" Long # Y01-130-NT
    view full answer...

  • Will Adarac Pro Series Tonneau Cover Fit 2016 GMC Canyon with BakFLIP Tonneau
  • The Adarac Pro Series Tonneau Cover part # A4000950 which is a confirmed fit for your 2016 GMC Canyon is compatible with tonneau covers that install between the bed rails as this rack attaches to the top of the bed rails. I am not totally sure which BAKFlip tonneau you have, but the MX4 part # BAK48125 which fits the 6 foot version of your bed would work with the ladder rack.
    view full answer...

  • How Much Bed Rail Access is Needed to Install Buyers Products Ladder Rack 3371501410
  • The Buyers Products Ladder Rack # 3371501410 will fit your full-size 2018 Ford F-150 that has a tool box as long as you have at least 72-inches of access on each bed rail. I confirmed this mounting space requirement with my engineering contact at Buyers Products. Please refer to the photo.
    view full answer...