The Brophy Clamp On Camper Tie-Downs, # HSAB are 3/8" thick. So for a snug fit to your topper they will need to be removed or you will need to adjust for this dimension within the seal of where your topper comes into contact with the bed rails. view full answer...
Hey Cynthia, congrats on the new truck. The Fas-top Solo Collapsible Soft Truck Topper item # FT99WV comes with everything you need to get it installed on a 2026 Nissan Frontier. This cover fits the 5' bed models.
If your Nissan Frontier has the longer 6' bed you will need the Fas-top Solo Collapsible Soft Truck Topper item # FT69WV.
There are a couple of optional accessories you can add to these toppers. I have listed them below:
Fas-top Traveler Truck Topper Rear Mesh Window item... view full answer...
Hello Michael, thanks for reaching out. The Westin EXP Truck Topper # W88PT will only fit the 5-1/2' bed models of the 2023 Tundra. Sadly, there is no fit for the 6.5' bed at this time.
For the 6.5' bed models the only topper we offer is the Agri-Cover Outlander Soft Truck Topper # UT28FR. view full answer...
Yes, what you can use is the Pop & Lock Power Locking Handle for Truck Caps and Hard Tonneau Covers # PAL9555 installed in the ATC Lone Star edition truck topper and your truck's key FOB will lock and unlock the topper. view full answer...
In order to install a ladder rack on your 2014 Toyota Tundra you'll have to remove the truck topper since the mounting brackets sit in the same spot as the topper and the uprights are slanted so they will make contact with your topper.
If you're willing/able to remove the topper when you need the ladder rack then I recommend the Flint Hill Goods Aluminum Pickup Truck Ladder Rack # FHG64ZR because of the aluminum construction. I've put together a handful of these ladder racks and you'd... view full answer...
I do have an option for you but we don't carry replacement parts for ARE toppers. Instead, what we can offer is a new electronic lock which will replace the manual lock, the Pop & Lock Power Locking Handle for Truck Caps and Hard Tonneau Covers part # PAL9555. view full answer...
You can take a quick measurement to make sure the Darby Extend-A-Truck Kayak Carrier, part # DTA944-968-924 will work for you.
Just measure from the top of the trailer hitch opening to the top of your bed topper. The # DTA944-968-924 extends from 53-3/8 inches to 60-3/8 inches so if this height range clears your topper then the Darby will work well for you. It shouldn't be an issue though because most toppers are not that tall. view full answer...
The channel on top of the truck toppers is compatible the vast majority of the time with Thule equipment as you mentioned. To add an Aeroblade Thule rack, you will want the Thule fit kit part # THKIT3101, the compatible feet # TH460R, and then crossbars like the old Thule AeroBlade or the newer WingBar Evo Load Bars - Aluminum - 60" # TH711520 or # TH711500.
I recommend using the Thule One-Key System Lock Cylinders - Qty 4 # TH450400 to secure your roof rack to your truck topper. view full answer...
Hello Ben, thanks for reaching out. The Westin EXP Truck Topper # W98PT is for the 5-1/2' bed model of the 2021 Toyota Tundra. It will not fit the long bed models.
At this time, the only topper we offer for the long bed is the Agri-Cover Truck Topper # UT78FR which is an aluminum frame soft-sided topper.
Comment below and let me know if you have any questions. view full answer...
You sure can, Dave. On your 2025 Silverado 1500 (or GMC Sierra 1500) with the 6-1/2' bed, the # FT42MV is the stand-alone tonneau, and when you’re ready to add a topper to those same rails, you’ll want the # FT26TV Solo Topper Add-On. The # FT26TV is the topper that’s specifically made to mount to the existing # FT42MV tonneau rails - no re-installing rails or clamps on the truck.
If you don’t have a tonneau yet and want a topper by itself, that’s when you’d choose the # FT44EV Solo Topper... view full answer...
Hey Shapour, we have the Agri-Cover Outlander Soft Truck Topper part # UT48FR that is a fit for your 2017 Nissan Frontier 6 foot bed which would do a great job. view full answer...
Since you are wanting to mount the Podium feet on a fiberglass truck topper using the Thule Podium feet you need the Thule Direct Mount Fit Kit # THKIT3113. view full answer...
The only type of ladder rack we can recommend with a truck bed topper is going to be one that attaches to the top of the topper like the Thule TracRac CapRac part # TH29200XT as there isn't a way to fit a ladder rack that attaches to the bed rails around the topper. view full answer...
Hey Dennis, yes the Agri-Cover Outlander Soft Truck Topper # UT36FR that you referenced is for the 6 foot bed versions of the 2022 Nissan Frontier like you asked about. view full answer...
I have a solution for you, but there are not brackets to mount the Rhino Rack Pioneer platforms directly to your truck topper. I recommend adding a track system to the roof of your topper. You will use the Rhino-Rack RTC-Style Roof Rack Tracks # RTC14 to provide the tracks and then use the Track Mount RLTP Legs for Rhino-Rack RTC- and RT-Style Roof Rack Tracks # RLTP (x2) to mount the platform to the tracks. view full answer...
Hello Michael,
I reached out to my contact at Westin and he said that the Westin EXP Truck Topper - Aluminum - Black # W78PT weighs 251 pounds. This would help keep things secure in the bed of you truck for sure!
Does that weight work for you? view full answer...
Because your A.R.E. Topper has the actuating rods instead of a wire pulley setup you'll need to use the Pop & Lock Power Pop Remote Keyless Entry Kit for Hard Tonneau Covers # PAL9000, which will replace your old rotary latch. The actuating rods make this topper not compatible with the # PAL9772 you were looking at, but this would be a comparable replacement. view full answer...
Hello Rawlings, thanks for reaching out. The Fas-top Solo Collapsible Soft Truck Topper # FT83EV is designed to be weather resistant. The canvas will repel water, and there are weather seals along each rail that help keep water out. Any tonneau cover or topper has the potential for small leaks, and the best way to minimize this is to make sure it is properly installed. Keep in mind, it is weather resistant, not waterproof. In heavy rain you may see small leaks, but it will keep a vast majority... view full answer...
Hi Gordon; when you say short bed do you mean you have the 5' bed? The Fas-top Solo Collapsible Soft Truck Topper # FT27WV will fit if you have the 6' bed but not the 5' bed models. This is the only truck topper we have for the 2000 Tacoma. view full answer...
I have a solution for you, but there is not a plug and play type harness for this application that I'm aware of, so the easiest way is to tap into the tail lights on the truck. In order to power the third brake light on your truck topper via the tail lights you will need the Pacer Performance 3rd Brake Light Logic Module part # PP20-702, since the brake/turn signal circuits are combined. This means you'll need to separate the brake/turn signals or else the third brake light would blink... view full answer...
Go To Results