Hey Tim!
The cable that comes with the Conventional Ramp Door Spring # 362SA8207 can be ran over the top. I'm attaching a photo from a review someone sent in that has the cables ran this way for you to check out.
Just curious why you're wanting it ran that certain way? view full answer...
Hello Ross,
Yep, the Adco SFS AquaShed Trailer Cover for Bumper Pull Horse Trailers up to 18' Long # 290-46005 does have a cutout for the front right (passenger's side) as well as the rear of your trailer. view full answer...
Hi Clarence; leaf springs like the # EM48AJ you referenced and the # e39SR you ordered have a powder coat finish. This will resist the basic elements and help prevent corrosion. We also have leaf springs like the etrailer Rust-Resistant 6-Leaf Slipper Spring # e46FV which come with a Dacromet finish with a salt spray rating of 700 hours ideal for applications like your boat trailer. view full answer...
Hi Greg,
We do offer replacement chains, but they are not included with the Replacement Trunnion Spring Bar for Reese Weight Distribution System # RP22225.
What you can use for replacements is the Reese Replacement Weight Distribution Chain Kit # 3216. view full answer...
Hello Don, thanks for reaching out. Yes, there is an air bag kit that will work on your 2001 Ford F250 with the B&W GNRH1108 gooseneck hitch. For that I recommend the following:
- Air Lift LoadLifter 5000 Air Helper Springs - Rear Axle # AL57298
These will be compatible with an in bed 5th wheel or gooseneck hitch. The instructions include application for both hitches.
You also have the option of adding an onboard compressor like the Air Lift WirelessONE Compressor System for Air Helper... view full answer...
Hello Vic. The Idler Hubs that come with the Dexter Trailer Idler Axle # 20440I-EZ-60 do not come pre packed and greased. A tube of bearing grease is included, but the bearings will need to be greased and packed prior to installation. A bearing packer like the Powerbuilt Deluxe Bearing Packer # ALL647646 will make this job much easier. view full answer...
I took a look at the instructions for the Blue Ox SwayPro Weight Distribution System item # BXW1000 you were looking at. From the top of the spring bar where the chain attaches to the top of your trailer frame there will be a distance of just about 11" when set on the 9th link not the 5th. Please also keep in mind that because of how the clamp on brackets attach to the frame this particular system will only work well on frames that are up to 6" tall.
For taller frames your best option... view full answer...
Yes, it will Joe. I checked with Air Lift and took a look at the instructions, their LoadLifter 5000 Air Helper Springs item # AL49DQ will indeed fit your 2015 Toyota Tacoma SR5 4wd. This kit comes with custom fit brackets and 5,000 lbs air bags that will level the rear end of your truck out when you're towing a trailer or hauling a heavy load.
I recommend adding the Air Lift WirelessONE Compressor System item # AL25980. This onboard compressor will allow you to adjust the pressure in... view full answer...
Hi Russ, thanks for all of the details and photo!
For your application it will be best to get a whole new 14K Equal-i-zer Weight Distribution System w/ 4-Point Sway Control # EQ37140ET. When I sent your photo over to my contact at Equal-i-zer he said there are a few things that are concerning like the shank is not one that came with the hitch head and there is some hardware missing like the sleeves where the bars install on the hitch system.
Getting a whole new system gives you a whole... view full answer...
Go To Results